Here is a list of all documented functions, variables, defines, enums, and typedefs with links to the documentation:

- b -

• BARRIER_INFORMATION_DEFINE : barrierdata.h
• Barrier_MP_Remote_operations : barriermp.h
• BAUDRATE : bsp.h
• BBB_CONTROL_CONF_GPMC_AD : bbb-pwm.h
• BBB_DIGITAL_IN : bbb-gpio.h
• BBB_LED_USR0 : beagleboneblack.h
• BBB_PUDEN : bbb-gpio.h
• BBB_PWMSS : bbb-pwm.h
• BCB : uart.h
• BCM2835_EMMC_BASE : raspberrypi.h
• BCM2835_GPU_TIMER_BASE : raspberrypi.h
• beagle_pwm_disable() : bbb-pwm.h
• beagle_pwm_enable() : bbb-pwm.h
• beagle_pwm_init() : bbb-pwm.h
• beagle_pwm_pinmux_setup() : bbb-pwm.h
• beagle_pwmss_is_running() : bbb-pwm.h
• beagle_setup_mmu_and_cache() : bsp.h
• BEGIN_BSS : asm.h
• BEGIN_CODE : asm.h
• BEGIN_CODE_DCL : asm.h
• BEGIN_DATA : asm.h
• BEGIN_DATA_DCL : asm.h
• benchmark_timer_disable_subtracting_average_overhead() : btimer.c , btimer.h , btimer.c , timer.c , btimer.c , timer.c , btimer.c , timer.c , btimer.c , btimer-ppc-dec.c , btimer.c
• benchmark_timer_empty_function() : btimer.h
• benchmark_timer_initialize() : btimer.c , timer.c , btimer.c , timer.c , btimer.c , timer.c , btimer.c , btimer-ppc-dec.c , btimer.c , btimer.h
• benchmark_timer_read() : btimer.c , timer.c , btimer.c , timer.c , btimer.c , timer.c , btimer.c , btimer-ppc-dec.c , btimer.c , btimer.h
• benchmark_timer_t : btimer.h
• bfin_interrupt_init() : interrupt.h , interrupt.c
• bfin_interrupt_register() : interrupt.h , interrupt.c
• bfin_interrupt_unregister() : interrupt.h , interrupt.c
• BI : uart.h
• BITMAPINFOHEADER : bmp.h
• BITSET_DEFINE() : processormask.h
• BLOCK_ERASE_32K : s25fl1.h
• BLOCK_ERASE_4K : s25fl1.h
• BLOCK_ERASE_64K : s25fl1.h
• BMP_TYPE : bmp.h
• BMPHeader : bmp.h
• BNRY : wd80x3.h
• BOARD_ConfigureSdram() : board_memories.c , board_memories.h
• BOARD_SDRAM_BUSWIDTH : sdramc.h
• boot_card() : bootcard.h , bootcard.c
• BREAK_INSTR : mips_opcode.h
• BSC_CORE_CLK_HZ : i2c.h
• bsp_boot_cmdline : bootcard.h , bootcard.c , bspcmdline_get.c , bspcmdline_getparamraw.c
• bsp_clicks_per_usec : bspstart.c , bsp.h , bspstart.c , clock-ppc403.c , bspstart.c
• bsp_clock_speed : bsp.h , bspstart.c , bsp.h
• BSP_connect_clock_handler() : bsp.h
• bsp_console_select() : console_select.c , serial.h , legacy-console-select.c
• BSP_Convert_decrementer : bsp.h
• bsp_fdt_map_intr() : bspstart.c
• BSP_get_current_rtems_irq_handler() : irq-legacy.c , irq.h
• bsp_get_serial_mouse_device() : serial_mouse.h
• bsp_idle_thread() : bsp.h , bspidle.c , idle-thread.c , bsp.h , bspidle.c , bsp.h , bspidle.c , bsp.h , bspidle.c , bsp.h
• BSP_install_rtems_irq_handler() : irq-legacy.c , irq.h
• BSP_install_rtems_shared_irq_handler() : irq-legacy.c
• bsp_interrupt_dispatch() : irq.c
• bsp_interrupt_facility_initialize() : irq-default.c , irq.c , irq-generic.h , irq.c
• bsp_interrupt_handler_default() : irq.c , irq-generic.h , irq.c
• bsp_interrupt_handler_is_empty() : irq-generic.h , irq-generic.c
• bsp_interrupt_initialize() : irq-generic.c , irq-generic.h
• bsp_interrupt_report() : irq-info.h , irq-info.c
• bsp_interrupt_report_with_plugin() : irq-info.c , irq-info.h
• bsp_interrupt_shell_command : irq-info.h , irq-shell.c
• bsp_interrupt_vector_disable() : irq.c , irq-generic.h , irq.c , irq-default.c , irq.c
• bsp_interrupt_vector_enable() : irq.c , irq-generic.h , irq.c , irq-default.c , irq.c
• BSP_INTERRUPT_VECTOR_MAX : irq-default.h , irq.h
• BSP_INTERRUPT_VECTOR_MIN : irq-default.h , irq.h
• BSP_irq_ack_at_i8259s() : i8259.c , i8259.h
• BSP_irq_disable_at_i8259s() : i8259.h , i8259.c
• BSP_irq_enable_at_i8259s() : i8259.c , i8259.h
• BSP_irq_enabled_at_i8259s() : i8259.c , i8259.h
• BSP_IRQ_VECTOR_BASE : irq.h
• BSP_MAIN_FREQ : bsp.h
• BSP_MAX_INT : bsp.h
• BSP_OSC_FREQ : bsp.h
• BSP_output_char : console-config.c , console-generic.c , printk-dummy.c , bspIo.h , console-config.c , printk-support.c , console.c , printk_support.c , console-config.c , uart-output-char.c , console-debugio.c , debugputs.c , console-config.c
• BSP_output_char_function_type : bspIo.h
• BSP_PERIODIC_TIMER : irq.h
• BSP_poll_char : console-config.c , bspIo.h , printk_support.c , console-config.c , debugputs.c , printk-dummy.c , uart-output-char.c , console-debugio.c , console-config.c , console-generic.c , console-config.c , printk-support.c , console.c
• BSP_polling_getchar_function_type : bspIo.h
• BSP_remove_rtems_irq_handler() : irq.h , irq-legacy.c
• bsp_restart() : bsp.h , restart.c
• bsp_rtc_get_time() : rtc-config.c
• bsp_rtc_initialize() : rtc-config.c
• bsp_rtc_probe() : rtc-config.c
• bsp_rtc_set_time() : rtc-config.c
• BSP_rtems_irq_mngt_get() : irq.h , irq-legacy.c
• BSP_rtems_irq_mngt_set() : irq.h , irq-legacy.c
• BSP_SHARED_HANDLER_SUPPORT : irq.h
• bsp_stack_allocate() : stackalloc.c , stackalloc.h
• bsp_stack_allocate_init() : stackalloc.h , stackalloc.c
• bsp_stack_free() : stackalloc.h , stackalloc.c
• bsp_start_hook_0() : start.h
• bsp_start_hook_1() : start.h
• bsp_start_memcpy() : start.h
• bsp_start_memcpy_arm() : start.h
• bsp_start_on_secondary_processor() : bootcard.h , bspsmp.c
• bsp_start_zero() : start.h
• bsp_start_zero_begin : start.h
• bsp_start_zero_end : start.h
• bsp_start_zero_size : start.h
• BSP_UART_COM1 : uart.h
• BSP_UART_INTR_CTRL_DISABLE : uart.h
• BSP_UART_INTR_CTRL_ENABLE : uart.h
• BSP_UART_INTR_CTRL_GDB : uart.h
• BSP_UART_INTR_CTRL_TERMIOS : uart.h
• BSP_UART_STATUS_BREAK : uart.h
• BSP_UART_STATUS_CHAR : uart.h
• BSP_UART_STATUS_ERROR : uart.h
• BSP_UART_STATUS_NOCHAR : uart.h
• BusFault_Handler() : exceptions.c
• BUTTON : mouse_parser.h
• BYTE_PAGE_PROGRAM : s25fl1.h