ERC32

ERC32 Board Support Package. More...

Files
file	bsp.h
	Global BSP definitions.

Macros
#define	BSP_IDLE_TASK_BODY   bsp_idle_thread
#define	RTEMS_BSP_NETWORK_DRIVER_NAME   "sonic1"
#define	RTEMS_BSP_NETWORK_DRIVER_ATTACH   rtems_erc32_sonic_driver_attach

Typedefs
typedef void(*	bsp_shared_isr) (void *arg)

Functions
void *	bsp_idle_thread (uintptr_t ignored)
	Optimized idle task. More...
int	rtems_erc32_sonic_driver_attach (struct rtems_bsdnet_ifconfig *config)
rtems_isr_entry	set_vector (rtems_isr_entry handler, rtems_vector_number vector, int type)
	Install an interrupt handler. More...
void	BSP_fatal_exit (uint32_t error)
void	bsp_spurious_initialize (void)
void	BSP_shared_interrupt_init (void)
void	bsp_isr_handler (rtems_vector_number vector)
void	BSP_shared_interrupt_clear (int irq)
void	BSP_shared_interrupt_unmask (int irq)
void	BSP_shared_interrupt_mask (int irq)
void	rtems_bsp_delay (int usecs)
void	console_outbyte_polled (int port, unsigned char ch)
int	console_inbyte_nonblocking (int port)

Variables
int	RAM_START
int	RAM_END
int	RAM_SIZE
int	PROM_START
int	PROM_END
int	PROM_SIZE
int	CLOCK_SPEED
int	end

Detailed Description

ERC32 Board Support Package.

Function Documentation

bsp_idle_thread()

void* bsp_idle_thread

(

uintptr_t

ignored

)

Optimized idle task.

This BSP provides its own IDLE thread to override the RTEMS one.

This idle task sets the power mode to idle. This causes the processor clock to be stopped, while on-chip peripherals remain active. Any enabled interrupt from a peripheral or an external interrupt source will cause the processor to resume execution.

To enable the idle task use the following in the system configuration:

#include <bsp.h>

#define CONFIGURE_INIT

#define CONFIGURE_IDLE_TASK_BODY bsp_idle_thread

#include <confdefs.h>

This BSP provides its own IDLE thread to override the RTEMS one.

Optimized idle task.

The MSR[POW] bit is set to put the CPU into the low power mode defined in HID0. HID0 is set during starup in start.S.

This BSP provides its own IDLE thread to override the RTEMS one.

This idle task sets the power mode to idle. This causes the processor clock to be stopped, while on-chip peripherals remain active. Any enabled interrupt from a peripheral or an external interrupt source will cause the processor to resume execution.

To enable the idle task use the following in the system configuration:

#include <bsp.h>

#define CONFIGURE_INIT

#define CONFIGURE_IDLE_TASK_BODY bsp_idle_thread

#include <confdefs.h>

Optimized idle task.

The MSR[POW] bit is set to put the CPU into the low power mode defined in HID0. HID0 is set during starup in start.S.

console_inbyte_nonblocking()

int console_inbyte_nonblocking

(

int

port

)

This method polls the specified port for an input character. console port.

Parameters

[in]

port

is the input port

Returns

This method returns the character read of -1 if there is no data.

set_vector()

rtems_isr_entry set_vector	(	rtems_isr_entry	handler,
		rtems_vector_number	vector,
		int	type
	)

Install an interrupt handler.

This method installs an interrupt handle.

Parameters

[in]	handler	is the isr routine
[in]	vector	is the vector number
[in]	type	indicates whether RTEMS or RAW intr

Returns

returns old vector