Data Structures
struct	ALT_DMA_CFG_s

Typedefs
typedef enum ALT_DMA_MANAGER_STATE_e	ALT_DMA_MANAGER_STATE_t

typedef enum ALT_DMA_CHANNEL_STATE_e	ALT_DMA_CHANNEL_STATE_t

typedef enum ALT_DMA_MANAGER_FAULT_e	ALT_DMA_MANAGER_FAULT_t

typedef enum ALT_DMA_CHANNEL_FAULT_e	ALT_DMA_CHANNEL_FAULT_t

typedef enum ALT_DMA_EVENT_SELECT_e	ALT_DMA_EVENT_SELECT_t

typedef enum ALT_DMA_PERIPH_MUX_e	ALT_DMA_PERIPH_MUX_t

typedef struct ALT_DMA_CFG_s	ALT_DMA_CFG_t

Enumerations
enum	ALT_DMA_MANAGER_STATE_e { ALT_DMA_MANAGER_STATE_STOPPED = 0 , ALT_DMA_MANAGER_STATE_EXECUTING = 1 , ALT_DMA_MANAGER_STATE_CACHE_MISS = 2 , ALT_DMA_MANAGER_STATE_UPDATING_PC = 3 , ALT_DMA_MANAGER_STATE_WFE = 4 , ALT_DMA_MANAGER_STATE_FAULTING = 15 }

enum	ALT_DMA_CHANNEL_STATE_e { ALT_DMA_CHANNEL_STATE_STOPPED = 0 , ALT_DMA_CHANNEL_STATE_EXECUTING = 1 , ALT_DMA_CHANNEL_STATE_CACHE_MISS = 2 , ALT_DMA_CHANNEL_STATE_UPDATING_PC = 3 , ALT_DMA_CHANNEL_STATE_WFE = 4 , ALT_DMA_CHANNEL_STATE_AT_BARRIER = 5 , ALT_DMA_CHANNEL_STATE_WFP = 7 , ALT_DMA_CHANNEL_STATE_KILLING = 8 , ALT_DMA_CHANNEL_STATE_COMPLETING = 9 , ALT_DMA_CHANNEL_STATE_FAULTING_COMPLETING = 14 , ALT_DMA_CHANNEL_STATE_FAULTING = 15 }

enum	ALT_DMA_MANAGER_FAULT_e { ALT_DMA_MANAGER_FAULT_DBG_INSTR = (int32_t)(1UL << 30) , ALT_DMA_MANAGER_FAULT_INSTR_FETCH_ERR = (int32_t)(1UL << 16) , ALT_DMA_MANAGER_FAULT_MGR_EVNT_ERR = (int32_t)(1UL << 5) , ALT_DMA_MANAGER_FAULT_DMAGO_ERR = (int32_t)(1UL << 4) , ALT_DMA_MANAGER_FAULT_OPERAND_INVALID = (int32_t)(1UL << 1) , ALT_DMA_MANAGER_FAULT_UNDEF_INSTR = (int32_t)(1UL << 0) }

enum	ALT_DMA_CHANNEL_FAULT_e { ALT_DMA_CHANNEL_FAULT_LOCKUP_ERR = (int32_t)(1UL << 31) , ALT_DMA_CHANNEL_FAULT_DBG_INSTR = (int32_t)(1UL << 30) , ALT_DMA_CHANNEL_FAULT_DATA_READ_ERR = (int32_t)(1UL << 18) , ALT_DMA_CHANNEL_FAULT_DATA_WRITE_ERR = (int32_t)(1UL << 17) , ALT_DMA_CHANNEL_FAULT_INSTR_FETCH_ERR = (int32_t)(1UL << 16) , ALT_DMA_CHANNEL_FAULT_ST_DATA_UNAVAILABLE = (int32_t)(1UL << 13) , ALT_DMA_CHANNEL_FAULT_MFIFO_ERR = (int32_t)(1UL << 12) , ALT_DMA_CHANNEL_FAULT_CH_RDWR_ERR = (int32_t)(1UL << 7) , ALT_DMA_CHANNEL_FAULT_CH_PERIPH_ERR = (int32_t)(1UL << 6) , ALT_DMA_CHANNEL_FAULT_CH_EVNT_ERR = (int32_t)(1UL << 5) , ALT_DMA_CHANNEL_FAULT_OPERAND_INVALID = (int32_t)(1UL << 1) , ALT_DMA_CHANNEL_FAULT_UNDEF_INSTR = (int32_t)(1UL << 0) }

enum	ALT_DMA_EVENT_SELECT_e { ALT_DMA_EVENT_SELECT_SEND_EVT , ALT_DMA_EVENT_SELECT_SIG_IRQ }

enum	ALT_DMA_PERIPH_MUX_e { ALT_DMA_PERIPH_MUX_DEFAULT = 0 , ALT_DMA_PERIPH_MUX_FPGA = 1 , ALT_DMA_PERIPH_MUX_CAN = 2 }

Functions
ALT_STATUS_CODE	alt_dma_init (const ALT_DMA_CFG_t *dma_cfg)

ALT_STATUS_CODE	alt_dma_uninit (void)

ALT_STATUS_CODE	alt_dma_channel_alloc (ALT_DMA_CHANNEL_t channel)

ALT_STATUS_CODE	alt_dma_channel_alloc_any (ALT_DMA_CHANNEL_t *allocated)

ALT_STATUS_CODE	alt_dma_channel_free (ALT_DMA_CHANNEL_t channel)

ALT_STATUS_CODE	alt_dma_channel_exec (ALT_DMA_CHANNEL_t channel, ALT_DMA_PROGRAM_t *pgm)

ALT_STATUS_CODE	alt_dma_channel_kill (ALT_DMA_CHANNEL_t channel)

ALT_STATUS_CODE	alt_dma_channel_reg_get (ALT_DMA_CHANNEL_t channel, ALT_DMA_PROGRAM_REG_t reg, uint32_t *val)

ALT_STATUS_CODE	alt_dma_send_event (ALT_DMA_EVENT_t evt_num)

ALT_STATUS_CODE	alt_dma_manager_state_get (ALT_DMA_MANAGER_STATE_t *state)

ALT_STATUS_CODE	alt_dma_channel_state_get (ALT_DMA_CHANNEL_t channel, ALT_DMA_CHANNEL_STATE_t *state)

ALT_STATUS_CODE	alt_dma_manager_fault_status_get (ALT_DMA_MANAGER_FAULT_t *fault)

ALT_STATUS_CODE	alt_dma_channel_fault_status_get (ALT_DMA_CHANNEL_t channel, ALT_DMA_CHANNEL_FAULT_t *fault)

ALT_STATUS_CODE	alt_dma_event_int_select (ALT_DMA_EVENT_t evt_num, ALT_DMA_EVENT_SELECT_t opt)

ALT_STATUS_CODE	alt_dma_event_int_status_get_raw (ALT_DMA_EVENT_t evt_num)

ALT_STATUS_CODE	alt_dma_int_status_get (ALT_DMA_EVENT_t irq_num)

ALT_STATUS_CODE	alt_dma_int_clear (ALT_DMA_EVENT_t irq_num)

Detailed Description

This API provides functions for configuration, control, and status queries of the DMA controller.

Typedef Documentation

◆ ALT_DMA_CFG_t

typedef struct ALT_DMA_CFG_s ALT_DMA_CFG_t

This type defines the structure used to specify the configuration of the security states and peripheral interface MUX selections for the DMA controller.

◆ ALT_DMA_CHANNEL_FAULT_t

typedef enum ALT_DMA_CHANNEL_FAULT_e ALT_DMA_CHANNEL_FAULT_t

This type definition enumerates the possible fault status that a channel may have as a register mask.

◆ ALT_DMA_CHANNEL_STATE_t

typedef enum ALT_DMA_CHANNEL_STATE_e ALT_DMA_CHANNEL_STATE_t

This type definition enumerates the operational states that a DMA channel may have.

◆ ALT_DMA_EVENT_SELECT_t

typedef enum ALT_DMA_EVENT_SELECT_e ALT_DMA_EVENT_SELECT_t

This type definition enumerates the possible DMA event-interrupt behavior option selections when a DMASEV instruction is executed.

◆ ALT_DMA_MANAGER_FAULT_t

typedef enum ALT_DMA_MANAGER_FAULT_e ALT_DMA_MANAGER_FAULT_t

This type definition enumerates the possible fault status that the DMA manager can have as a register mask.

◆ ALT_DMA_MANAGER_STATE_t

typedef enum ALT_DMA_MANAGER_STATE_e ALT_DMA_MANAGER_STATE_t

This type definition enumerates the operational states that the DMA manager may have.

◆ ALT_DMA_PERIPH_MUX_t

typedef enum ALT_DMA_PERIPH_MUX_e ALT_DMA_PERIPH_MUX_t

This type enumerates the DMA peripheral interface MUX selection options available.

Enumeration Type Documentation

◆ ALT_DMA_CHANNEL_FAULT_e

enum ALT_DMA_CHANNEL_FAULT_e

This type definition enumerates the possible fault status that a channel may have as a register mask.

Enumerator
ALT_DMA_CHANNEL_FAULT_LOCKUP_ERR	The DMA channel has locked up due to resource starvation.
ALT_DMA_CHANNEL_FAULT_DBG_INSTR	The DMA channel abort occured because of an instruction issued through the debug interface.
ALT_DMA_CHANNEL_FAULT_DATA_READ_ERR	The DMA channel data read AXI bus reponse was not OKAY.
ALT_DMA_CHANNEL_FAULT_DATA_WRITE_ERR	The DMA channel data write AXI bus response was not OKAY.
ALT_DMA_CHANNEL_FAULT_INSTR_FETCH_ERR	The DMA channel instruction fetch AXI bus response was not OKAY.
ALT_DMA_CHANNEL_FAULT_ST_DATA_UNAVAILABLE	The DMA channel MFIFO did not have the data for the DMAST instruction.
ALT_DMA_CHANNEL_FAULT_MFIFO_ERR	The DMA channel MFIFO is too small to hold the DMALD instruction data, or too small to servic the DMAST instruction request.
ALT_DMA_CHANNEL_FAULT_CH_RDWR_ERR	The DMA channel in non-secure state attempted to perform a secure read or write.
ALT_DMA_CHANNEL_FAULT_CH_PERIPH_ERR	The DMA channel in non-secure state attempted to execute the DMAWFP, DMALDP, DMASTP, or DMAFLUSHP instruction involving a secure peripheral.
ALT_DMA_CHANNEL_FAULT_CH_EVNT_ERR	The DMA channel in non-secure state attempted to execute the DMAWFE or DMASEV instruction for a secure event or secure interrupt (if applicable).
ALT_DMA_CHANNEL_FAULT_OPERAND_INVALID	The DMA channel attempted to execute an instruction operand that was not valid for the DMA configuration.
ALT_DMA_CHANNEL_FAULT_UNDEF_INSTR	The DMA channel attempted to execute an undefined instruction.

◆ ALT_DMA_CHANNEL_STATE_e

enum ALT_DMA_CHANNEL_STATE_e

This type definition enumerates the operational states that a DMA channel may have.

Enumerator
ALT_DMA_CHANNEL_STATE_STOPPED	Stopped
ALT_DMA_CHANNEL_STATE_EXECUTING	Executing
ALT_DMA_CHANNEL_STATE_CACHE_MISS	Cache Miss
ALT_DMA_CHANNEL_STATE_UPDATING_PC	Updating PC
ALT_DMA_CHANNEL_STATE_WFE	Waiting for Event
ALT_DMA_CHANNEL_STATE_AT_BARRIER	At Barrier
ALT_DMA_CHANNEL_STATE_WFP	Waiting for Peripheral
ALT_DMA_CHANNEL_STATE_KILLING	Killing
ALT_DMA_CHANNEL_STATE_COMPLETING	Completing
ALT_DMA_CHANNEL_STATE_FAULTING_COMPLETING	Faulting Completing
ALT_DMA_CHANNEL_STATE_FAULTING	Faulting

◆ ALT_DMA_EVENT_SELECT_e

enum ALT_DMA_EVENT_SELECT_e

This type definition enumerates the possible DMA event-interrupt behavior option selections when a DMASEV instruction is executed.

Enumerator
ALT_DMA_EVENT_SELECT_SEND_EVT	If the DMA controller executes DMASEV for the event-interrupt resource then the DMA sends the event to all of the channel threads.
ALT_DMA_EVENT_SELECT_SIG_IRQ	If the DMA controller executes DMASEV for the event-interrupt resource then the DMA sets the irq[N] HIGH.

◆ ALT_DMA_MANAGER_FAULT_e

enum ALT_DMA_MANAGER_FAULT_e

This type definition enumerates the possible fault status that the DMA manager can have as a register mask.

Enumerator
ALT_DMA_MANAGER_FAULT_DBG_INSTR	The DMA manager abort occured because of an instruction issued through the debug interface.
ALT_DMA_MANAGER_FAULT_INSTR_FETCH_ERR	The DMA manager instruction fetch AXI bus response was not OKAY.
ALT_DMA_MANAGER_FAULT_MGR_EVNT_ERR	The DMA manager attempted to execute DMAWFE or DMASEV with inappropriate security permissions.
ALT_DMA_MANAGER_FAULT_DMAGO_ERR	The DMA manager attempted to execute DMAGO with inappropriate security permissions.
ALT_DMA_MANAGER_FAULT_OPERAND_INVALID	The DMA manager attempted to execute an instruction operand that was not valid for the DMA configuration.
ALT_DMA_MANAGER_FAULT_UNDEF_INSTR	The DMA manager attempted to execute an undefined instruction.

◆ ALT_DMA_MANAGER_STATE_e

enum ALT_DMA_MANAGER_STATE_e

This type definition enumerates the operational states that the DMA manager may have.

Enumerator
ALT_DMA_MANAGER_STATE_STOPPED	Stopped
ALT_DMA_MANAGER_STATE_EXECUTING	Executing
ALT_DMA_MANAGER_STATE_CACHE_MISS	Cache Miss
ALT_DMA_MANAGER_STATE_UPDATING_PC	Updating PC
ALT_DMA_MANAGER_STATE_WFE	Waiting for Event
ALT_DMA_MANAGER_STATE_FAULTING	Faulting

◆ ALT_DMA_PERIPH_MUX_e

enum ALT_DMA_PERIPH_MUX_e

This type enumerates the DMA peripheral interface MUX selection options available.

Enumerator
ALT_DMA_PERIPH_MUX_DEFAULT	Accept the reset default MUX selection
ALT_DMA_PERIPH_MUX_FPGA	Select FPGA as the peripheral interface
ALT_DMA_PERIPH_MUX_CAN	Select CAN as the peripheral interface

Function Documentation

◆ alt_dma_channel_alloc()

ALT_STATUS_CODE alt_dma_channel_alloc ( ALT_DMA_CHANNEL_t channel )

Allocate a DMA channel resource for use.

Parameters

channel A DMA controller channel.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.

◆ alt_dma_channel_alloc_any()

ALT_STATUS_CODE alt_dma_channel_alloc_any ( ALT_DMA_CHANNEL_t * allocated )

Allocate a free DMA channel resource for use if there are any.

Parameters

allocated [out] A pointer to an output parameter that will contain the channel allocated.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed. An unallocated channel may not be available at the time of the API call.

◆ alt_dma_channel_exec()

ALT_STATUS_CODE alt_dma_channel_exec	(	ALT_DMA_CHANNEL_t	channel,
		ALT_DMA_PROGRAM_t *	pgm
	)

Start execution of a DMA microcode program on the specified DMA channel thread resource.

Parameters

channel	The DMA channel thread used to execute the microcode program.
pgm	The DMA microcode program.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.

◆ alt_dma_channel_fault_status_get()

ALT_STATUS_CODE alt_dma_channel_fault_status_get	(	ALT_DMA_CHANNEL_t	channel,
		ALT_DMA_CHANNEL_FAULT_t *	fault
	)

Return the current fault status of the specified DMA channel thread.

Parameters

channel	The DMA channel thread to return the fault status of.
fault	[out] Pointer to an output parameter to contain the DMA channel fault status.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.
ALT_E_BAD_ARG	The given channel identifier is invalid.

◆ alt_dma_channel_free()

ALT_STATUS_CODE alt_dma_channel_free ( ALT_DMA_CHANNEL_t channel )

Free a DMA channel resource for reuse.

Parameters

channel The DMA controller channel resource to free.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed. The channel may not be in the STOPPED state.

◆ alt_dma_channel_kill()

ALT_STATUS_CODE alt_dma_channel_kill ( ALT_DMA_CHANNEL_t channel )

Kill (abort) execution of any microcode program executing on the specified DMA channel thread resource.

Terminates the channel thread of execution by issuing a DMAKILL instruction using the DMA APB slave interface.

Parameters

channel The DMA channel thread to abort any executing microcode program on.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.
ALT_E_TMO	Timeout waiting for the channel to change into KILLING or STOPPED state.

◆ alt_dma_channel_reg_get()

ALT_STATUS_CODE alt_dma_channel_reg_get	(	ALT_DMA_CHANNEL_t	channel,
		ALT_DMA_PROGRAM_REG_t	reg,
		uint32_t *	val
	)

Returns the current register value for the given DMA channel.

Parameters

channel	The DMA channel thread to abort any executing microcode program on.
reg	Register to get the value for.
val	[out] The current value of the requested register.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.
ALT_E_BAD_ARG	The specified channel or register is invalid.

◆ alt_dma_channel_state_get()

ALT_STATUS_CODE alt_dma_channel_state_get	(	ALT_DMA_CHANNEL_t	channel,
		ALT_DMA_CHANNEL_STATE_t *	state
	)

Returns the current operational state of the specified DMA channel thread.

Parameters

channel	The DMA channel thread to return the operational state of.
state	[out] Pointer to an output parameter to contain the DMA channel thread state.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.
ALT_E_BAD_ARG	The given channel identifier is invalid.

◆ alt_dma_event_int_select()

ALT_STATUS_CODE alt_dma_event_int_select	(	ALT_DMA_EVENT_t	evt_num,
		ALT_DMA_EVENT_SELECT_t	opt
	)

Select whether the DMA controller sends the specific event to all channel threads or signals an interrupt using the corressponding irq when a DMASEV instruction is executed for the specified event-interrupt resource number.

Parameters

evt_num	The event-interrupt resource number. Valid values are ALT_DMA_EVENT_0 .. ALT_DMA_EVENT_7 and ALT_DMA_EVENT_ABORT.
opt	The desired behavior selection for evt_num when a DMASEV is executed.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.
ALT_E_BAD_ARG	The given selection identifier is invalid.

◆ alt_dma_event_int_status_get_raw()

ALT_STATUS_CODE alt_dma_event_int_status_get_raw ( ALT_DMA_EVENT_t evt_num )

Returns the status of the specified event-interrupt resource.

Returns ALT_E_TRUE if event is active or irq[N] is HIGH and returns ALT_E_FALSE if event is inactive or irq[N] is LOW.

Parameters

evt_num The event-interrupt resource number. Valid values are ALT_DMA_EVENT_0 .. ALT_DMA_EVENT_7 and ALT_DMA_EVENT_ABORT.

Return values

ALT_E_TRUE	Event is active or irq[N] is HIGH.
ALT_E_FALSE	Event is inactive or irq[N] is LOW.
ALT_E_ERROR	The operation failed.
ALT_E_BAD_ARG	The given event identifier is invalid.

◆ alt_dma_init()

ALT_STATUS_CODE alt_dma_init ( const ALT_DMA_CFG_t * dma_cfg )

Initialize the DMA controller.

Initializes the DMA controller by setting the necessary control values to establish the security state and MUXed peripheral request interface selection configurations before taking the DMA controller out of reset.

After the DMA is initialized, the following conditions hold true:

All DMA channel threads are in the Stopped state.
All DMA channel threads are available for allocation.
DMA Manager thread is waiting for an instruction from either APB interface.
The security state configurations of the DMA Manager, interrupt outputs, and peripheral request interfaces are established and immutable until the DMA is reset.
The MUXed peripheral request interface selection configurations are established and immutable until the DMA is reset.

Parameters

dma_cfg A pointer to a ALT_DMA_CFG_t structure containing the desired DMA controller security state and peripheral request interface MUX selections.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.

◆ alt_dma_int_clear()

ALT_STATUS_CODE alt_dma_int_clear ( ALT_DMA_EVENT_t irq_num )

Clear the active (HIGH) status of the specified interrupt resource.

If the specified interrupt is HIGH, then sets irq[N] to LOW if the event-interrupt resource is configured (see: alt_dma_event_int_enable()) to signal an interrupt. Otherwise, the status of irq[N] does not change.

Parameters

irq_num The interrupt resource number. Valid values are ALT_DMA_EVENT_0 .. ALT_DMA_EVENT_7 and ALT_DMA_EVENT_ABORT.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.
ALT_E_BAD_ARG	The given event identifier is invalid.

◆ alt_dma_int_status_get()

ALT_STATUS_CODE alt_dma_int_status_get ( ALT_DMA_EVENT_t irq_num )

Returns the status of the specified interrupt resource.

Returns ALT_E_TRUE if interrupt is active and therfore irq[N] is HIGH and returns ALT_E_FALSE if interrupt is inactive and therfore irq[N] is LOW.

Parameters

irq_num The interrupt resource number. Valid values are ALT_DMA_EVENT_0 .. ALT_DMA_EVENT_7 and ALT_DMA_EVENT_ABORT.

Return values

ALT_E_TRUE	Event is active or irq[N] is HIGH.
ALT_E_FALSE	Event is inactive or irq[N] is LOW.
ALT_E_ERROR	The operation failed.
ALT_E_BAD_ARG	The given event identifier is invalid.

◆ alt_dma_manager_fault_status_get()

ALT_STATUS_CODE alt_dma_manager_fault_status_get ( ALT_DMA_MANAGER_FAULT_t * fault )

Return the current fault status of the DMA manager thread.

Parameters

fault [out] Pointer to an output parameter to contain the DMA manager fault status.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.

◆ alt_dma_manager_state_get()

ALT_STATUS_CODE alt_dma_manager_state_get ( ALT_DMA_MANAGER_STATE_t * state )

Returns the current operational state of the DMA manager thread.

Parameters

state [out] Pointer to an output parameter to contain the DMA channel thread state.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.

◆ alt_dma_send_event()

ALT_STATUS_CODE alt_dma_send_event ( ALT_DMA_EVENT_t evt_num )

Signals the occurrence of an event or interrupt, using the specified event number.

Causes the CPU to issue a DMASEV instruction using the DMA APB slave interface.

The Interrupt Enable Register (INTEN) register is used to control if each event-interrupt resource is either an event or an interrupt. The INTEN register sets the event-interrupt resource to function as an:

Event - The DMAC generates an event for the specified event-interrupt resource. When the DMAC executes a DMAWFE instruction for the same event-interrupt resource then it clears the event.
Interrupt - The DMAC sets the IRQ[N] signal high, where evt_num is the number of the specified event resource. The interrupt must be cleared after being handled.

When the configured to generate an event, this function may be used to restart one or more waiting DMA channels (i.e. having executed a DMAWFE instruction).

See the following sections from the ARM DDI 0424C, CoreLink DMA Controller DMA-330 Technical Reference Manual for implementation details and use cases:

2.5.1, Issuing Instructions to the DMAC using a Slave Interface
2.7, Using Events and Interrupts

Parameters

evt_num A DMA event-interrupt resource. Allowable event values may be ALT_DMA_EVENT_0 .. ALT_DMA_EVENT_7 but ALT_DMA_EVENT_ABORT is not.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.
ALT_E_BAD_ARG	The given event number is invalid.

◆ alt_dma_uninit()

ALT_STATUS_CODE alt_dma_uninit ( void )

Uninitializes the DMA controller.

Uninitializes the DMA controller by killing any running channel threads and putting the DMA controller into reset.

Return values

ALT_E_SUCCESS	The operation was successful.
ALT_E_ERROR	The operation failed.

Data Structures

Typedefs

Enumerations

Functions

Detailed Description

Typedef Documentation

◆ ALT_DMA_CFG_t

◆ ALT_DMA_CHANNEL_FAULT_t

◆ ALT_DMA_CHANNEL_STATE_t

◆ ALT_DMA_EVENT_SELECT_t

◆ ALT_DMA_MANAGER_FAULT_t

◆ ALT_DMA_MANAGER_STATE_t

◆ ALT_DMA_PERIPH_MUX_t

Enumeration Type Documentation

◆ ALT_DMA_CHANNEL_FAULT_e

◆ ALT_DMA_CHANNEL_STATE_e

◆ ALT_DMA_EVENT_SELECT_e

◆ ALT_DMA_MANAGER_FAULT_e

◆ ALT_DMA_MANAGER_STATE_e

◆ ALT_DMA_PERIPH_MUX_e

Function Documentation

◆ alt_dma_channel_alloc()

◆ alt_dma_channel_alloc_any()

◆ alt_dma_channel_exec()

◆ alt_dma_channel_fault_status_get()

◆ alt_dma_channel_free()

◆ alt_dma_channel_kill()

◆ alt_dma_channel_reg_get()

◆ alt_dma_channel_state_get()

◆ alt_dma_event_int_select()

◆ alt_dma_event_int_status_get_raw()

◆ alt_dma_init()

◆ alt_dma_int_clear()

◆ alt_dma_int_status_get()

◆ alt_dma_manager_fault_status_get()

◆ alt_dma_manager_state_get()

◆ alt_dma_send_event()

◆ alt_dma_uninit()