RTEMS 6.1-rc6
Loading...
Searching...
No Matches
Data Structures | Macros | Functions
stm32h7xx_hal_smbus.h File Reference

Header file of SMBUS HAL module. More...

#include "stm32h7xx_hal_def.h"
#include "stm32h7xx_hal_smbus_ex.h"

Go to the source code of this file.

Data Structures

struct  SMBUS_InitTypeDef
 
struct  SMBUS_HandleTypeDef
 

Macros

#define HAL_SMBUS_STATE_RESET   (0x00000000U)
 
#define HAL_SMBUS_STATE_READY   (0x00000001U)
 
#define HAL_SMBUS_STATE_BUSY   (0x00000002U)
 
#define HAL_SMBUS_STATE_MASTER_BUSY_TX   (0x00000012U)
 
#define HAL_SMBUS_STATE_MASTER_BUSY_RX   (0x00000022U)
 
#define HAL_SMBUS_STATE_SLAVE_BUSY_TX   (0x00000032U)
 
#define HAL_SMBUS_STATE_SLAVE_BUSY_RX   (0x00000042U)
 
#define HAL_SMBUS_STATE_LISTEN   (0x00000008U)
 
#define HAL_SMBUS_ERROR_NONE   (0x00000000U)
 
#define HAL_SMBUS_ERROR_BERR   (0x00000001U)
 
#define HAL_SMBUS_ERROR_ARLO   (0x00000002U)
 
#define HAL_SMBUS_ERROR_ACKF   (0x00000004U)
 
#define HAL_SMBUS_ERROR_OVR   (0x00000008U)
 
#define HAL_SMBUS_ERROR_HALTIMEOUT   (0x00000010U)
 
#define HAL_SMBUS_ERROR_BUSTIMEOUT   (0x00000020U)
 
#define HAL_SMBUS_ERROR_ALERT   (0x00000040U)
 
#define HAL_SMBUS_ERROR_PECERR   (0x00000080U)
 
#define HAL_SMBUS_ERROR_INVALID_PARAM   (0x00000200U)
 
#define SMBUS_ANALOGFILTER_ENABLE   (0x00000000U)
 
#define SMBUS_ANALOGFILTER_DISABLE   I2C_CR1_ANFOFF
 
#define SMBUS_ADDRESSINGMODE_7BIT   (0x00000001U)
 
#define SMBUS_ADDRESSINGMODE_10BIT   (0x00000002U)
 
#define SMBUS_DUALADDRESS_DISABLE   (0x00000000U)
 
#define SMBUS_DUALADDRESS_ENABLE   I2C_OAR2_OA2EN
 
#define SMBUS_OA2_NOMASK   ((uint8_t)0x00U)
 
#define SMBUS_OA2_MASK01   ((uint8_t)0x01U)
 
#define SMBUS_OA2_MASK02   ((uint8_t)0x02U)
 
#define SMBUS_OA2_MASK03   ((uint8_t)0x03U)
 
#define SMBUS_OA2_MASK04   ((uint8_t)0x04U)
 
#define SMBUS_OA2_MASK05   ((uint8_t)0x05U)
 
#define SMBUS_OA2_MASK06   ((uint8_t)0x06U)
 
#define SMBUS_OA2_MASK07   ((uint8_t)0x07U)
 
#define SMBUS_GENERALCALL_DISABLE   (0x00000000U)
 
#define SMBUS_GENERALCALL_ENABLE   I2C_CR1_GCEN
 
#define SMBUS_NOSTRETCH_DISABLE   (0x00000000U)
 
#define SMBUS_NOSTRETCH_ENABLE   I2C_CR1_NOSTRETCH
 
#define SMBUS_PEC_DISABLE   (0x00000000U)
 
#define SMBUS_PEC_ENABLE   I2C_CR1_PECEN
 
#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST   I2C_CR1_SMBHEN
 
#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE   (0x00000000U)
 
#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP   I2C_CR1_SMBDEN
 
#define SMBUS_SOFTEND_MODE   (0x00000000U)
 
#define SMBUS_RELOAD_MODE   I2C_CR2_RELOAD
 
#define SMBUS_AUTOEND_MODE   I2C_CR2_AUTOEND
 
#define SMBUS_SENDPEC_MODE   I2C_CR2_PECBYTE
 
#define SMBUS_NO_STARTSTOP   (0x00000000U)
 
#define SMBUS_GENERATE_STOP   (uint32_t)(0x80000000U | I2C_CR2_STOP)
 
#define SMBUS_GENERATE_START_READ   (uint32_t)(0x80000000U | I2C_CR2_START | I2C_CR2_RD_WRN)
 
#define SMBUS_GENERATE_START_WRITE   (uint32_t)(0x80000000U | I2C_CR2_START)
 
#define SMBUS_FIRST_FRAME   SMBUS_SOFTEND_MODE
 
#define SMBUS_NEXT_FRAME   ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE))
 
#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC   SMBUS_AUTOEND_MODE
 
#define SMBUS_LAST_FRAME_NO_PEC   SMBUS_AUTOEND_MODE
 
#define SMBUS_FIRST_FRAME_WITH_PEC   ((uint32_t)(SMBUS_SOFTEND_MODE | SMBUS_SENDPEC_MODE))
 
#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC   ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
 
#define SMBUS_LAST_FRAME_WITH_PEC   ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
 
#define SMBUS_OTHER_FRAME_NO_PEC   (0x000000AAU)
 
#define SMBUS_OTHER_FRAME_WITH_PEC   (0x0000AA00U)
 
#define SMBUS_OTHER_AND_LAST_FRAME_NO_PEC   (0x00AA0000U)
 
#define SMBUS_OTHER_AND_LAST_FRAME_WITH_PEC   (0xAA000000U)
 
#define SMBUS_IT_ERRI   I2C_CR1_ERRIE
 
#define SMBUS_IT_TCI   I2C_CR1_TCIE
 
#define SMBUS_IT_STOPI   I2C_CR1_STOPIE
 
#define SMBUS_IT_NACKI   I2C_CR1_NACKIE
 
#define SMBUS_IT_ADDRI   I2C_CR1_ADDRIE
 
#define SMBUS_IT_RXI   I2C_CR1_RXIE
 
#define SMBUS_IT_TXI   I2C_CR1_TXIE
 
#define SMBUS_IT_TX
 
#define SMBUS_IT_RX
 
#define SMBUS_IT_ALERT   (SMBUS_IT_ERRI)
 
#define SMBUS_IT_ADDR   (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
 
#define SMBUS_FLAG_TXE   I2C_ISR_TXE
 
#define SMBUS_FLAG_TXIS   I2C_ISR_TXIS
 
#define SMBUS_FLAG_RXNE   I2C_ISR_RXNE
 
#define SMBUS_FLAG_ADDR   I2C_ISR_ADDR
 
#define SMBUS_FLAG_AF   I2C_ISR_NACKF
 
#define SMBUS_FLAG_STOPF   I2C_ISR_STOPF
 
#define SMBUS_FLAG_TC   I2C_ISR_TC
 
#define SMBUS_FLAG_TCR   I2C_ISR_TCR
 
#define SMBUS_FLAG_BERR   I2C_ISR_BERR
 
#define SMBUS_FLAG_ARLO   I2C_ISR_ARLO
 
#define SMBUS_FLAG_OVR   I2C_ISR_OVR
 
#define SMBUS_FLAG_PECERR   I2C_ISR_PECERR
 
#define SMBUS_FLAG_TIMEOUT   I2C_ISR_TIMEOUT
 
#define SMBUS_FLAG_ALERT   I2C_ISR_ALERT
 
#define SMBUS_FLAG_BUSY   I2C_ISR_BUSY
 
#define SMBUS_FLAG_DIR   I2C_ISR_DIR
 
#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__)   ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
 Reset SMBUS handle state.
 
#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
 Enable the specified SMBUS interrupts.
 
#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__)   ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
 Disable the specified SMBUS interrupts.
 
#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)    ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
 Check whether the specified SMBUS interrupt source is enabled or not.
 
#define SMBUS_FLAG_MASK   (0x0001FFFFU)
 Check whether the specified SMBUS flag is set or not.
 
#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__)
 
#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__)
 Clear the SMBUS pending flags which are cleared by writing 1 in a specific bit.
 
#define __HAL_SMBUS_ENABLE(__HANDLE__)   (SET_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
 Enable the specified SMBUS peripheral.
 
#define __HAL_SMBUS_DISABLE(__HANDLE__)   (CLEAR_BIT((__HANDLE__)->Instance->CR1, I2C_CR1_PE))
 Disable the specified SMBUS peripheral.
 
#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__)   (SET_BIT((__HANDLE__)->Instance->CR2, I2C_CR2_NACK))
 Generate a Non-Acknowledge SMBUS peripheral in Slave mode.
 
#define IS_SMBUS_ANALOG_FILTER(FILTER)
 
#define IS_SMBUS_DIGITAL_FILTER(FILTER)   ((FILTER) <= 0x0000000FU)
 
#define IS_SMBUS_ADDRESSING_MODE(MODE)
 
#define IS_SMBUS_DUAL_ADDRESS(ADDRESS)
 
#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK)
 
#define IS_SMBUS_GENERAL_CALL(CALL)
 
#define IS_SMBUS_NO_STRETCH(STRETCH)
 
#define IS_SMBUS_PEC(PEC)
 
#define IS_SMBUS_PERIPHERAL_MODE(MODE)
 
#define IS_SMBUS_TRANSFER_MODE(MODE)
 
#define IS_SMBUS_TRANSFER_REQUEST(REQUEST)
 
#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST)
 
#define IS_SMBUS_TRANSFER_OTHER_OPTIONS_REQUEST(REQUEST)
 
#define SMBUS_RESET_CR1(__HANDLE__)
 
#define SMBUS_RESET_CR2(__HANDLE__)
 
#define SMBUS_GENERATE_START(__ADDMODE__, __ADDRESS__)
 
#define SMBUS_GET_ADDR_MATCH(__HANDLE__)   (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17U)
 
#define SMBUS_GET_DIR(__HANDLE__)   (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16U)
 
#define SMBUS_GET_STOP_MODE(__HANDLE__)   ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
 
#define SMBUS_GET_PEC_MODE(__HANDLE__)   ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
 
#define SMBUS_GET_ALERT_ENABLED(__HANDLE__)   ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
 
#define SMBUS_CHECK_FLAG(__ISR__, __FLAG__)
 
#define SMBUS_CHECK_IT_SOURCE(__CR1__, __IT__)   ((((__CR1__) & (__IT__)) == (__IT__)) ? SET : RESET)
 
#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1)   ((ADDRESS1) <= 0x000003FFU)
 
#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2)   ((ADDRESS2) <= (uint16_t)0x00FFU)
 

Functions

HAL_StatusTypeDef HAL_SMBUS_Init (SMBUS_HandleTypeDef *hsmbus)
 
HAL_StatusTypeDef HAL_SMBUS_DeInit (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_MspInit (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_MspDeInit (SMBUS_HandleTypeDef *hsmbus)
 
HAL_StatusTypeDef HAL_SMBUS_ConfigAnalogFilter (SMBUS_HandleTypeDef *hsmbus, uint32_t AnalogFilter)
 
HAL_StatusTypeDef HAL_SMBUS_ConfigDigitalFilter (SMBUS_HandleTypeDef *hsmbus, uint32_t DigitalFilter)
 
HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady (SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
 
HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT (SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
 
HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT (SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
 
HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT (SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress)
 
HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT (SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
 
HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT (SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions)
 
HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT (SMBUS_HandleTypeDef *hsmbus)
 
HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT (SMBUS_HandleTypeDef *hsmbus)
 
HAL_StatusTypeDef HAL_SMBUS_EnableListen_IT (SMBUS_HandleTypeDef *hsmbus)
 
HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_EV_IRQHandler (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_ER_IRQHandler (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_MasterTxCpltCallback (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_MasterRxCpltCallback (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_SlaveTxCpltCallback (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_SlaveRxCpltCallback (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_AddrCallback (SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode)
 
void HAL_SMBUS_ListenCpltCallback (SMBUS_HandleTypeDef *hsmbus)
 
void HAL_SMBUS_ErrorCallback (SMBUS_HandleTypeDef *hsmbus)
 
uint32_t HAL_SMBUS_GetState (const SMBUS_HandleTypeDef *hsmbus)
 
uint32_t HAL_SMBUS_GetError (const SMBUS_HandleTypeDef *hsmbus)
 

Detailed Description

Header file of SMBUS HAL module.

Author
MCD Application Team
Attention

Copyright (c) 2017 STMicroelectronics. All rights reserved.

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.

Generated by doxygen 1.9.6