Data Structures
struct	_dcdc_config
	Configuration for DCDC. More...

struct	_dcdc_min_power_config
	Configuration for min power setting. More...

struct	_dcdc_detection_config
	Configuration for DCDC detection. More...

struct	_dcdc_loop_control_config
	Configuration for the loop control. More...

struct	_dcdc_internal_regulator_config
	Configuration for DCDC internal regulator. More...

struct	_dcdc_low_power_config
	Configuration for DCDC low power. More...

struct	_dcdc_setpoint_config
	DCDC configuration in set point mode. More...

Macros
#define	FSL_DCDC_DRIVER_VERSION (MAKE_VERSION(2, 1, 1))
	DCDC driver version.

#define	STANDBY_MODE_VDD1P0_TARGET_VOLTAGE
	The array of VDD1P0 target voltage in standby mode.

#define	STANDBY_MODE_VDD1P8_TARGET_VOLTAGE
	The array of VDD1P8 target voltage in standby mode.

#define	BUCK_MODE_VDD1P0_TARGET_VOLTAGE
	The array of VDD1P0 target voltage in buck mode.

#define	BUCK_MODE_VDD1P8_TARGET_VOLTAGE
	The array of VDD1P8 target voltage in buck mode.

Typedefs
typedef enum _dcdc_control_mode	dcdc_control_mode_t
	DCDC control mode, including setpoint control mode and static control mode.

typedef enum _dcdc_trim_input_mode	dcdc_trim_input_mode_t
	DCDC trim input mode, including sample trim input and hold trim input.

typedef enum _dcdc_standby_mode_1P0_target_vol	dcdc_standby_mode_1P0_target_vol_t
	The enumeration VDD1P0's target voltage value in standby mode.

typedef enum _dcdc_standby_mode_1P8_target_vol	dcdc_standby_mode_1P8_target_vol_t
	The enumeration VDD1P8's target voltage value in standby mode.

typedef enum _dcdc_buck_mode_1P0_target_vol	dcdc_buck_mode_1P0_target_vol_t
	The enumeration VDD1P0's target voltage value in buck mode.

typedef enum _dcdc_buck_mode_1P8_target_vol	dcdc_buck_mode_1P8_target_vol_t
	The enumeration VDD1P8's target voltage value in buck mode.

typedef enum _dcdc_comparator_current_bias	dcdc_comparator_current_bias_t
	The current bias of low power comparator.

typedef enum _dcdc_peak_current_threshold	dcdc_peak_current_threshold_t
	The threshold if peak current detection.

typedef enum _dcdc_clock_source	dcdc_clock_source_t
	Oscillator clock option.

typedef enum _dcdc_voltage_output_sel	dcdc_voltage_output_sel_t
	Voltage output option.

typedef struct _dcdc_config	dcdc_config_t
	Configuration for DCDC.

typedef struct _dcdc_min_power_config	dcdc_min_power_config_t
	Configuration for min power setting.

typedef struct _dcdc_detection_config	dcdc_detection_config_t
	Configuration for DCDC detection.

typedef struct _dcdc_loop_control_config	dcdc_loop_control_config_t
	Configuration for the loop control.

typedef struct _dcdc_internal_regulator_config	dcdc_internal_regulator_config_t
	Configuration for DCDC internal regulator.

typedef struct _dcdc_low_power_config	dcdc_low_power_config_t
	Configuration for DCDC low power.

typedef struct _dcdc_setpoint_config	dcdc_setpoint_config_t
	DCDC configuration in set point mode.

Enumerations
enum	_dcdc_status_flags { kDCDC_AlreadySettledStatusFlag = DCDC_REG0_STS_DC_OK_MASK }
	The enumeration of DCDC status flags. More...

enum	_dcdc_setpoint_map { kDCDC_SetPoint0 = 1UL << 0UL , kDCDC_SetPoint1 = 1UL << 1UL , kDCDC_SetPoint2 = 1UL << 2UL , kDCDC_SetPoint3 = 1UL << 3UL , kDCDC_SetPoint4 = 1UL << 4UL , kDCDC_SetPoint5 = 1UL << 5UL , kDCDC_SetPoint6 = 1UL << 6UL , kDCDC_SetPoint7 = 1UL << 7UL , kDCDC_SetPoint8 = 1UL << 8UL , kDCDC_SetPoint9 = 1UL << 9UL , kDCDC_SetPoint10 = 1UL << 10UL , kDCDC_SetPoint11 = 1UL << 11UL , kDCDC_SetPoint12 = 1UL << 12UL , kDCDC_SetPoint13 = 1UL << 13UL , kDCDC_SetPoint14 = 1UL << 14UL , kDCDC_SetPoint15 = 1UL << 15UL }
	System setpoints enumeration. More...

enum	_dcdc_control_mode { kDCDC_StaticControl = 0U , kDCDC_SetPointControl = 1U }
	DCDC control mode, including setpoint control mode and static control mode. More...

enum	_dcdc_trim_input_mode { kDCDC_SampleTrimInput = 0U , kDCDC_HoldTrimInput = 1U }
	DCDC trim input mode, including sample trim input and hold trim input. More...

enum	_dcdc_standby_mode_1P0_target_vol { kDCDC_1P0StbyTarget0P625V = 0U , kDCDC_1P0StbyTarget0P65V , kDCDC_1P0StbyTarget0P675V , kDCDC_1P0StbyTarget0P7V , kDCDC_1P0StbyTarget0P725V , kDCDC_1P0StbyTarget0P75V , kDCDC_1P0StbyTarget0P775V , kDCDC_1P0StbyTarget0P8V , kDCDC_1P0StbyTarget0P825V , kDCDC_1P0StbyTarget0P85V , kDCDC_1P0StbyTarget0P875V , kDCDC_1P0StbyTarget0P9V , kDCDC_1P0StbyTarget0P925V , kDCDC_1P0StbyTarget0P95V , kDCDC_1P0StbyTarget0P975V , kDCDC_1P0StbyTarget1P0V , kDCDC_1P0StbyTarget1P025V , kDCDC_1P0StbyTarget1P05V , kDCDC_1P0StbyTarget1P075V , kDCDC_1P0StbyTarget1P1V , kDCDC_1P0StbyTarget1P125V , kDCDC_1P0StbyTarget1P15V , kDCDC_1P0StbyTarget1P175V , kDCDC_1P0StbyTarget1P2V , kDCDC_1P0StbyTarget1P225V , kDCDC_1P0StbyTarget1P25V , kDCDC_1P0StbyTarget1P275V , kDCDC_1P0StbyTarget1P3V , kDCDC_1P0StbyTarget1P325V , kDCDC_1P0StbyTarget1P35V , kDCDC_1P0StbyTarget1P375V , kDCDC_1P0StbyTarget1P4V = 0x1FU }
	The enumeration VDD1P0's target voltage value in standby mode. More...

enum	_dcdc_standby_mode_1P8_target_vol { kDCDC_1P8StbyTarget1P525V = 0U , kDCDC_1P8StbyTarget1P55V , kDCDC_1P8StbyTarget1P575V , kDCDC_1P8StbyTarget1P6V , kDCDC_1P8StbyTarget1P625V , kDCDC_1P8StbyTarget1P65V , kDCDC_1P8StbyTarget1P675V , kDCDC_1P8StbyTarget1P7V , kDCDC_1P8StbyTarget1P725V , kDCDC_1P8StbyTarget1P75V , kDCDC_1P8StbyTarget1P775V , kDCDC_1P8StbyTarget1P8V , kDCDC_1P8StbyTarget1P825V , kDCDC_1P8StbyTarget1P85V , kDCDC_1P8StbyTarget1P875V , kDCDC_1P8StbyTarget1P9V , kDCDC_1P8StbyTarget1P925V , kDCDC_1P8StbyTarget1P95V , kDCDC_1P8StbyTarget1P975V , kDCDC_1P8StbyTarget2P0V , kDCDC_1P8StbyTarget2P025V , kDCDC_1P8StbyTarget2P05V , kDCDC_1P8StbyTarget2P075V , kDCDC_1P8StbyTarget2P1V , kDCDC_1P8StbyTarget2P125V , kDCDC_1P8StbyTarget2P15V , kDCDC_1P8StbyTarget2P175V , kDCDC_1P8StbyTarget2P2V , kDCDC_1P8StbyTarget2P225V , kDCDC_1P8StbyTarget2P25V , kDCDC_1P8StbyTarget2P275V , kDCDC_1P8StbyTarget2P3V = 0x1FU }
	The enumeration VDD1P8's target voltage value in standby mode. More...

enum	_dcdc_buck_mode_1P0_target_vol { kDCDC_1P0BuckTarget0P6V = 0U , kDCDC_1P0BuckTarget0P625V , kDCDC_1P0BuckTarget0P65V , kDCDC_1P0BuckTarget0P675V , kDCDC_1P0BuckTarget0P7V , kDCDC_1P0BuckTarget0P725V , kDCDC_1P0BuckTarget0P75V , kDCDC_1P0BuckTarget0P775V , kDCDC_1P0BuckTarget0P8V , kDCDC_1P0BuckTarget0P825V , kDCDC_1P0BuckTarget0P85V , kDCDC_1P0BuckTarget0P875V , kDCDC_1P0BuckTarget0P9V , kDCDC_1P0BuckTarget0P925V , kDCDC_1P0BuckTarget0P95V , kDCDC_1P0BuckTarget0P975V , kDCDC_1P0BuckTarget1P0V , kDCDC_1P0BuckTarget1P025V , kDCDC_1P0BuckTarget1P05V , kDCDC_1P0BuckTarget1P075V , kDCDC_1P0BuckTarget1P1V , kDCDC_1P0BuckTarget1P125V , kDCDC_1P0BuckTarget1P15V , kDCDC_1P0BuckTarget1P175V , kDCDC_1P0BuckTarget1P2V , kDCDC_1P0BuckTarget1P225V , kDCDC_1P0BuckTarget1P25V , kDCDC_1P0BuckTarget1P275V , kDCDC_1P0BuckTarget1P3V , kDCDC_1P0BuckTarget1P325V , kDCDC_1P0BuckTarget1P35V , kDCDC_1P0BuckTarget1P375V = 0x1FU }
	The enumeration VDD1P0's target voltage value in buck mode. More...

enum	_dcdc_buck_mode_1P8_target_vol { kDCDC_1P8BuckTarget1P5V = 0U , kDCDC_1P8BuckTarget1P525V , kDCDC_1P8BuckTarget1P55V , kDCDC_1P8BuckTarget1P575V , kDCDC_1P8BuckTarget1P6V , kDCDC_1P8BuckTarget1P625V , kDCDC_1P8BuckTarget1P65V , kDCDC_1P8BuckTarget1P675V , kDCDC_1P8BuckTarget1P7V , kDCDC_1P8BuckTarget1P725V , kDCDC_1P8BuckTarget1P75V , kDCDC_1P8BuckTarget1P775V , kDCDC_1P8BuckTarget1P8V , kDCDC_1P8BuckTarget1P825V , kDCDC_1P8BuckTarget1P85V , kDCDC_1P8BuckTarget1P875V , kDCDC_1P8BuckTarget1P9V , kDCDC_1P8BuckTarget1P925V , kDCDC_1P8BuckTarget1P95V , kDCDC_1P8BuckTarget1P975V , kDCDC_1P8BuckTarget2P0V , kDCDC_1P8BuckTarget2P025V , kDCDC_1P8BuckTarget2P05V , kDCDC_1P8BuckTarget2P075V , kDCDC_1P8BuckTarget2P1V , kDCDC_1P8BuckTarget2P125V , kDCDC_1P8BuckTarget2P15V , kDCDC_1P8BuckTarget2P175V , kDCDC_1P8BuckTarget2P2V , kDCDC_1P8BuckTarget2P225V , kDCDC_1P8BuckTarget2P25V , kDCDC_1P8BuckTarget2P275V = 0x1FU }
	The enumeration VDD1P8's target voltage value in buck mode. More...

enum	_dcdc_comparator_current_bias { kDCDC_ComparatorCurrentBias50nA = 0U , kDCDC_ComparatorCurrentBias100nA = 1U , kDCDC_ComparatorCurrentBias200nA = 2U , kDCDC_ComparatorCurrentBias400nA = 3U , kDCDC_ComparatorCurrentBias50nA = 0U , kDCDC_ComparatorCurrentBias100nA = 1U , kDCDC_ComparatorCurrentBias200nA = 2U , kDCDC_ComparatorCurrentBias400nA = 3U }
	The current bias of low power comparator. More...

enum	_dcdc_peak_current_threshold { kDCDC_PeakCurrentRunMode250mALPMode1P5A = 0U , kDCDC_PeakCurrentRunMode200mALPMode1P5A , kDCDC_PeakCurrentRunMode250mALPMode2A , kDCDC_PeakCurrentRunMode200mALPMode2A , kDCDC_PeakCurrentThresholdAlt0 = 0U , kDCDC_PeakCurrentThresholdAlt1 = 1U , kDCDC_PeakCurrentThresholdAlt2 = 2U , kDCDC_PeakCurrentThresholdAlt3 = 3U , kDCDC_PeakCurrentThresholdAlt4 = 4U , kDCDC_PeakCurrentThresholdAlt5 = 5U }
	The threshold if peak current detection. More...

enum	_dcdc_clock_source { kDCDC_ClockAutoSwitch = 0U , kDCDC_ClockInternalOsc = 1U , kDCDC_ClockExternalOsc = 2U , kDCDC_ClockAutoSwitch = 0U , kDCDC_ClockInternalOsc = 1U , kDCDC_ClockExternalOsc = 2U }
	Oscillator clock option. More...

enum	_dcdc_voltage_output_sel { kDCDC_VoltageOutput1P8 = 0U , kDCDC_VoltageOutput1P0 = 1U }
	Voltage output option. More...

Initialization and De-initialization Interfaces
void	DCDC_Init (DCDC_Type base, const dcdc_config_t config)
	Initializes the basic resource of DCDC module, such as control mode, etc.

void	DCDC_Deinit (DCDC_Type *base)
	De-initializes the DCDC module.

void	DCDC_GetDefaultConfig (dcdc_config_t *config)
	Gets the default setting for DCDC, such as control mode, etc.

Detection Related Inferfaces
void	DCDC_GetDefaultDetectionConfig (dcdc_detection_config_t *config)
	Gets the default setting for detection configuration.

void	DCDC_SetDetectionConfig (DCDC_Type base, const dcdc_detection_config_t config)
	Configures the DCDC detection.

DCDC Miscellaneous Inferfaces
void	DCDC_SetClockSource (DCDC_Type *base, dcdc_clock_source_t clockSource)
	Configures the DCDC clock source.

void	DCDC_GetDefaultLowPowerConfig (dcdc_low_power_config_t *config)
	Gets the default setting for low power configuration.

void	DCDC_SetLowPowerConfig (DCDC_Type base, const dcdc_low_power_config_t config)
	Configures the DCDC low power.

void	DCDC_GetDefaultLoopControlConfig (dcdc_loop_control_config_t *config)
	Gets the default setting for loop control configuration.

void	DCDC_SetLoopControlConfig (DCDC_Type base, const dcdc_loop_control_config_t config)
	Configures the DCDC loop control.

void	DCDC_SetMinPowerConfig (DCDC_Type base, const dcdc_min_power_config_t config)
	Configures for the min power.

void	DCDC_SetInternalRegulatorConfig (DCDC_Type base, const dcdc_internal_regulator_config_t config)
	Configures the DCDC internal regulator.

Setpoint Control Related Interfaces
void	DCDC_SetPointInit (DCDC_Type base, const dcdc_setpoint_config_t config)
	Initializes DCDC module when the control mode selected as setpoint mode.

Application Guideline Interfaces
void	DCDC_BootIntoDCM (DCDC_Type *base)
	Boots DCDC into DCM(discontinous conduction mode).

void	DCDC_BootIntoCCM (DCDC_Type *base)
	Boots DCDC into CCM(continous conduction mode).

Detailed Description

Macro Definition Documentation

◆ BUCK_MODE_VDD1P0_TARGET_VOLTAGE

#define BUCK_MODE_VDD1P0_TARGET_VOLTAGE

Value:

    {                                                                                                                 \
        600, 625, 650, 675, 700, 725, 750, 775, 800, 825, 850, 875, 900, 925, 950, 975, 1000, 1025, 1050, 1075, 1100, \
            1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300, 1325, 1350, 1375                                          \
    }

The array of VDD1P0 target voltage in buck mode.

◆ BUCK_MODE_VDD1P8_TARGET_VOLTAGE

#define BUCK_MODE_VDD1P8_TARGET_VOLTAGE

Value:

    {                                                                                                               \
        1500, 1525, 1550, 1575, 1600, 1625, 1650, 1675, 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875, 1900, 1925, \
            1950, 1975, 2000, 2025, 2050, 2075, 2100, 2125, 2150, 2175, 2200, 2225, 2250, 2275                      \
    }

The array of VDD1P8 target voltage in buck mode.

◆ FSL_DCDC_DRIVER_VERSION

#define FSL_DCDC_DRIVER_VERSION (MAKE_VERSION(2, 1, 1))

DCDC driver version.

Version 2.1.1.

◆ STANDBY_MODE_VDD1P0_TARGET_VOLTAGE

#define STANDBY_MODE_VDD1P0_TARGET_VOLTAGE

Value:

    {                                                                                                                  \
        625, 650, 675, 700, 725, 750, 775, 800, 825, 850, 875, 900, 925, 950, 975, 1000, 1025, 1050, 1075, 1100, 1125, \
            1150, 1175, 1200, 1225, 1250, 1275, 1300, 1325, 1350, 1375, 1400                                           \
    }

The array of VDD1P0 target voltage in standby mode.

◆ STANDBY_MODE_VDD1P8_TARGET_VOLTAGE

#define STANDBY_MODE_VDD1P8_TARGET_VOLTAGE

Value:

    {                                                                                                               \
        1525, 1550, 1575, 1600, 1625, 1650, 1675, 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875, 1900, 1925, 1950, \
            1975, 2000, 2025, 2050, 2075, 2100, 2125, 2150, 2175, 2200, 2225, 2250, 2275, 2300                      \
    }

The array of VDD1P8 target voltage in standby mode.

Enumeration Type Documentation

◆ _dcdc_buck_mode_1P0_target_vol

enum _dcdc_buck_mode_1P0_target_vol

The enumeration VDD1P0's target voltage value in buck mode.

Enumerator
kDCDC_1P0BuckTarget0P6V	In buck mode, the target voltage value of VDD1P0 is 0.6V.
kDCDC_1P0BuckTarget0P625V	In buck mode, the target voltage value of VDD1P0 is 0.625V.
kDCDC_1P0BuckTarget0P65V	In buck mode, the target voltage value of VDD1P0 is 0.65V.
kDCDC_1P0BuckTarget0P675V	In buck mode, the target voltage value of VDD1P0 is 0.675V.
kDCDC_1P0BuckTarget0P7V	In buck mode, the target voltage value of VDD1P0 is 0.7V.
kDCDC_1P0BuckTarget0P725V	In buck mode, the target voltage value of VDD1P0 is 0.725V.
kDCDC_1P0BuckTarget0P75V	In buck mode, the target voltage value of VDD1P0 is 0.75V.
kDCDC_1P0BuckTarget0P775V	In buck mode, the target voltage value of VDD1P0 is 0.775V.
kDCDC_1P0BuckTarget0P8V	In buck mode, the target voltage value of VDD1P0 is 0.8V.
kDCDC_1P0BuckTarget0P825V	In buck mode, the target voltage value of VDD1P0 is 0.825V.
kDCDC_1P0BuckTarget0P85V	In buck mode, the target voltage value of VDD1P0 is 0.85V.
kDCDC_1P0BuckTarget0P875V	In buck mode, the target voltage value of VDD1P0 is 0.875V.
kDCDC_1P0BuckTarget0P9V	In buck mode, the target voltage value of VDD1P0 is 0.9V.
kDCDC_1P0BuckTarget0P925V	In buck mode, the target voltage value of VDD1P0 is 0.925V.
kDCDC_1P0BuckTarget0P95V	In buck mode, the target voltage value of VDD1P0 is 0.95V.
kDCDC_1P0BuckTarget0P975V	In buck mode, the target voltage value of VDD1P0 is 0.975V.
kDCDC_1P0BuckTarget1P0V	In buck mode, the target voltage value of VDD1P0 is 1.0V.
kDCDC_1P0BuckTarget1P025V	In buck mode, the target voltage value of VDD1P0 is 1.025V.
kDCDC_1P0BuckTarget1P05V	In buck mode, the target voltage value of VDD1P0 is 1.05V.
kDCDC_1P0BuckTarget1P075V	In buck mode, the target voltage value of VDD1P0 is 1.075V.
kDCDC_1P0BuckTarget1P1V	In buck mode, the target voltage value of VDD1P0 is 1.1V.
kDCDC_1P0BuckTarget1P125V	In buck mode, the target voltage value of VDD1P0 is 1.125V.
kDCDC_1P0BuckTarget1P15V	In buck mode, the target voltage value of VDD1P0 is 1.15V.
kDCDC_1P0BuckTarget1P175V	In buck mode, the target voltage value of VDD1P0 is 1.175V.
kDCDC_1P0BuckTarget1P2V	In buck mode, the target voltage value of VDD1P0 is 1.2V.
kDCDC_1P0BuckTarget1P225V	In buck mode, the target voltage value of VDD1P0 is 1.225V.
kDCDC_1P0BuckTarget1P25V	In buck mode, the target voltage value of VDD1P0 is 1.25V.
kDCDC_1P0BuckTarget1P275V	In buck mode, the target voltage value of VDD1P0 is 1.275V.
kDCDC_1P0BuckTarget1P3V	In buck mode, the target voltage value of VDD1P0 is 1.3V.
kDCDC_1P0BuckTarget1P325V	In buck mode, the target voltage value of VDD1P0 is 1.325V.
kDCDC_1P0BuckTarget1P35V	In buck mode, the target voltage value of VDD1P0 is 1.35V.
kDCDC_1P0BuckTarget1P375V	In buck mode, the target voltage value of VDD1P0 is 1.375V.

◆ _dcdc_buck_mode_1P8_target_vol

enum _dcdc_buck_mode_1P8_target_vol

The enumeration VDD1P8's target voltage value in buck mode.

Enumerator
kDCDC_1P8BuckTarget1P5V	In buck mode, the target voltage value of VDD1P0 is 1.5V.
kDCDC_1P8BuckTarget1P525V	In buck mode, the target voltage value of VDD1P0 is 1.525V.
kDCDC_1P8BuckTarget1P55V	In buck mode, the target voltage value of VDD1P0 is 1.55V.
kDCDC_1P8BuckTarget1P575V	In buck mode, the target voltage value of VDD1P0 is 1.575V.
kDCDC_1P8BuckTarget1P6V	In buck mode, the target voltage value of VDD1P0 is 1.6V.
kDCDC_1P8BuckTarget1P625V	In buck mode, the target voltage value of VDD1P0 is 1.625V.
kDCDC_1P8BuckTarget1P65V	In buck mode, the target voltage value of VDD1P0 is 1.65V.
kDCDC_1P8BuckTarget1P675V	In buck mode, the target voltage value of VDD1P0 is 1.675V.
kDCDC_1P8BuckTarget1P7V	In buck mode, the target voltage value of VDD1P0 is 1.7V.
kDCDC_1P8BuckTarget1P725V	In buck mode, the target voltage value of VDD1P0 is 1.725V.
kDCDC_1P8BuckTarget1P75V	In buck mode, the target voltage value of VDD1P0 is 1.75V.
kDCDC_1P8BuckTarget1P775V	In buck mode, the target voltage value of VDD1P0 is 1.775V.
kDCDC_1P8BuckTarget1P8V	In buck mode, the target voltage value of VDD1P0 is 1.8V.
kDCDC_1P8BuckTarget1P825V	In buck mode, the target voltage value of VDD1P0 is 1.825V.
kDCDC_1P8BuckTarget1P85V	In buck mode, the target voltage value of VDD1P0 is 1.85V.
kDCDC_1P8BuckTarget1P875V	In buck mode, the target voltage value of VDD1P0 is 1.875V.
kDCDC_1P8BuckTarget1P9V	In buck mode, the target voltage value of VDD1P0 is 1.9V.
kDCDC_1P8BuckTarget1P925V	In buck mode, the target voltage value of VDD1P0 is 1.925V.
kDCDC_1P8BuckTarget1P95V	In buck mode, the target voltage value of VDD1P0 is 1.95V.
kDCDC_1P8BuckTarget1P975V	In buck mode, the target voltage value of VDD1P0 is 1.975V.
kDCDC_1P8BuckTarget2P0V	In buck mode, the target voltage value of VDD1P0 is 2.0V.
kDCDC_1P8BuckTarget2P025V	In buck mode, the target voltage value of VDD1P0 is 2.025V.
kDCDC_1P8BuckTarget2P05V	In buck mode, the target voltage value of VDD1P0 is 2.05V.
kDCDC_1P8BuckTarget2P075V	In buck mode, the target voltage value of VDD1P0 is 2.075V.
kDCDC_1P8BuckTarget2P1V	In buck mode, the target voltage value of VDD1P0 is 2.1V.
kDCDC_1P8BuckTarget2P125V	In buck mode, the target voltage value of VDD1P0 is 2.125V.
kDCDC_1P8BuckTarget2P15V	In buck mode, the target voltage value of VDD1P0 is 2.15V.
kDCDC_1P8BuckTarget2P175V	In buck mode, the target voltage value of VDD1P0 is 2.175V.
kDCDC_1P8BuckTarget2P2V	In buck mode, the target voltage value of VDD1P0 is 2.2V.
kDCDC_1P8BuckTarget2P225V	In buck mode, the target voltage value of VDD1P0 is 2.225V.
kDCDC_1P8BuckTarget2P25V	In buck mode, the target voltage value of VDD1P0 is 2.25V.
kDCDC_1P8BuckTarget2P275V	In buck mode, the target voltage value of VDD1P0 is 2.275V.

◆ _dcdc_clock_source

enum _dcdc_clock_source

Oscillator clock option.

Enumerator
kDCDC_ClockAutoSwitch	Automatic clock switch from internal oscillator to external clock.
kDCDC_ClockInternalOsc	Use internal oscillator.
kDCDC_ClockExternalOsc	Use external 24M crystal oscillator.
kDCDC_ClockAutoSwitch	Automatic clock switch from internal oscillator to external clock.
kDCDC_ClockInternalOsc	Use internal oscillator.
kDCDC_ClockExternalOsc	Use external 24M crystal oscillator.

◆ _dcdc_comparator_current_bias

enum _dcdc_comparator_current_bias

The current bias of low power comparator.

Enumerator
kDCDC_ComparatorCurrentBias50nA	The current bias of low power comparator is 50nA.
kDCDC_ComparatorCurrentBias100nA	The current bias of low power comparator is 100nA.
kDCDC_ComparatorCurrentBias200nA	The current bias of low power comparator is 200nA.
kDCDC_ComparatorCurrentBias400nA	The current bias of low power comparator is 400nA.
kDCDC_ComparatorCurrentBias50nA	The current bias of low power comparator is 50nA.
kDCDC_ComparatorCurrentBias100nA	The current bias of low power comparator is 100nA.
kDCDC_ComparatorCurrentBias200nA	The current bias of low power comparator is 200nA.
kDCDC_ComparatorCurrentBias400nA	The current bias of low power comparator is 400nA.

◆ _dcdc_control_mode

enum _dcdc_control_mode

DCDC control mode, including setpoint control mode and static control mode.

Enumerator
kDCDC_StaticControl	Static control.
kDCDC_SetPointControl	Controlled by GPC set points.

◆ _dcdc_peak_current_threshold

enum _dcdc_peak_current_threshold

The threshold if peak current detection.

Enumerator
kDCDC_PeakCurrentRunMode250mALPMode1P5A	Over peak current threshold in low power mode is 250mA, in run mode is 1.5A
kDCDC_PeakCurrentRunMode200mALPMode1P5A	Over peak current threshold in low power mode is 200mA, in run mode is 1.5A
kDCDC_PeakCurrentRunMode250mALPMode2A	Over peak current threshold in low power mode is 250mA, in run mode is 2A
kDCDC_PeakCurrentRunMode200mALPMode2A	Over peak current threshold in low power mode is 200mA, in run mode is 2A
kDCDC_PeakCurrentThresholdAlt0	150mA peak current threshold.
kDCDC_PeakCurrentThresholdAlt1	250mA peak current threshold.
kDCDC_PeakCurrentThresholdAlt2	350mA peak current threshold.
kDCDC_PeakCurrentThresholdAlt3	450mA peak current threshold.
kDCDC_PeakCurrentThresholdAlt4	550mA peak current threshold.
kDCDC_PeakCurrentThresholdAlt5	650mA peak current threshold.

◆ _dcdc_setpoint_map

enum _dcdc_setpoint_map

System setpoints enumeration.

Enumerator
kDCDC_SetPoint0	Set point 0.
kDCDC_SetPoint1	Set point 1.
kDCDC_SetPoint2	Set point 2.
kDCDC_SetPoint3	Set point 3.
kDCDC_SetPoint4	Set point 4.
kDCDC_SetPoint5	Set point 5.
kDCDC_SetPoint6	Set point 6.
kDCDC_SetPoint7	Set point 7.
kDCDC_SetPoint8	Set point 8.
kDCDC_SetPoint9	Set point 9.
kDCDC_SetPoint10	Set point 10.
kDCDC_SetPoint11	Set point 11.
kDCDC_SetPoint12	Set point 12.
kDCDC_SetPoint13	Set point 13.
kDCDC_SetPoint14	Set point 14.
kDCDC_SetPoint15	Set point 15.

◆ _dcdc_standby_mode_1P0_target_vol

enum _dcdc_standby_mode_1P0_target_vol

The enumeration VDD1P0's target voltage value in standby mode.

Enumerator
kDCDC_1P0StbyTarget0P625V	In standby mode, the target voltage value of VDD1P0 is 0.625V.
kDCDC_1P0StbyTarget0P65V	In standby mode, the target voltage value of VDD1P0 is 0.65V.
kDCDC_1P0StbyTarget0P675V	In standby mode, the target voltage value of VDD1P0 is 0.675V.
kDCDC_1P0StbyTarget0P7V	In standby mode, the target voltage value of VDD1P0 is 0.7V.
kDCDC_1P0StbyTarget0P725V	In standby mode, the target voltage value of VDD1P0 is 0.725V.
kDCDC_1P0StbyTarget0P75V	In standby mode, the target voltage value of VDD1P0 is 0.75V.
kDCDC_1P0StbyTarget0P775V	In standby mode, the target voltage value of VDD1P0 is 0.775V.
kDCDC_1P0StbyTarget0P8V	In standby mode, the target voltage value of VDD1P0 is 0.8V.
kDCDC_1P0StbyTarget0P825V	In standby mode, the target voltage value of VDD1P0 is 0.825V.
kDCDC_1P0StbyTarget0P85V	In standby mode, the target voltage value of VDD1P0 is 0.85V.
kDCDC_1P0StbyTarget0P875V	In standby mode, the target voltage value of VDD1P0 is 0.875V.
kDCDC_1P0StbyTarget0P9V	In standby mode, the target voltage value of VDD1P0 is 0.9V.
kDCDC_1P0StbyTarget0P925V	In standby mode, the target voltage value of VDD1P0 is 0.925V.
kDCDC_1P0StbyTarget0P95V	In standby mode, the target voltage value of VDD1P0 is 0.95V.
kDCDC_1P0StbyTarget0P975V	In standby mode, the target voltage value of VDD1P0 is 0.975V.
kDCDC_1P0StbyTarget1P0V	In standby mode, the target voltage value of VDD1P0 is 1.0V.
kDCDC_1P0StbyTarget1P025V	In standby mode, the target voltage value of VDD1P0 is 1.025V.
kDCDC_1P0StbyTarget1P05V	In standby mode, the target voltage value of VDD1P0 is 1.05V.
kDCDC_1P0StbyTarget1P075V	In standby mode, the target voltage value of VDD1P0 is 1.075V.
kDCDC_1P0StbyTarget1P1V	In standby mode, the target voltage value of VDD1P0 is 1.1V.
kDCDC_1P0StbyTarget1P125V	In standby mode, the target voltage value of VDD1P0 is 1.125V.
kDCDC_1P0StbyTarget1P15V	In standby mode, the target voltage value of VDD1P0 is 1.15V.
kDCDC_1P0StbyTarget1P175V	In standby mode, the target voltage value of VDD1P0 is 1.175V.
kDCDC_1P0StbyTarget1P2V	In standby mode, the target voltage value of VDD1P0 is 1.2V.
kDCDC_1P0StbyTarget1P225V	In standby mode, the target voltage value of VDD1P0 is 1.225V.
kDCDC_1P0StbyTarget1P25V	In standby mode, the target voltage value of VDD1P0 is 1.25V.
kDCDC_1P0StbyTarget1P275V	In standby mode, the target voltage value of VDD1P0 is 1.275V.
kDCDC_1P0StbyTarget1P3V	In standby mode, the target voltage value of VDD1P0 is 1.3V.
kDCDC_1P0StbyTarget1P325V	In standby mode, the target voltage value of VDD1P0 is 1.325V.
kDCDC_1P0StbyTarget1P35V	In standby mode, the target voltage value of VDD1P0 is 1.35V.
kDCDC_1P0StbyTarget1P375V	In standby mode, the target voltage value of VDD1P0 is 1.375V.
kDCDC_1P0StbyTarget1P4V	In standby mode, The target voltage value of VDD1P0 is 1.4V

◆ _dcdc_standby_mode_1P8_target_vol

enum _dcdc_standby_mode_1P8_target_vol

The enumeration VDD1P8's target voltage value in standby mode.

Enumerator
kDCDC_1P8StbyTarget1P525V	In standby mode, the target voltage value of VDD1P8 is 1.525V.
kDCDC_1P8StbyTarget1P55V	In standby mode, the target voltage value of VDD1P8 is 1.55V.
kDCDC_1P8StbyTarget1P575V	In standby mode, the target voltage value of VDD1P8 is 1.575V.
kDCDC_1P8StbyTarget1P6V	In standby mode, the target voltage value of VDD1P8 is 1.6V.
kDCDC_1P8StbyTarget1P625V	In standby mode, the target voltage value of VDD1P8 is 1.625V.
kDCDC_1P8StbyTarget1P65V	In standby mode, the target voltage value of VDD1P8 is 1.65V.
kDCDC_1P8StbyTarget1P675V	In standby mode, the target voltage value of VDD1P8 is 1.675V.
kDCDC_1P8StbyTarget1P7V	In standby mode, the target voltage value of VDD1P8 is 1.7V.
kDCDC_1P8StbyTarget1P725V	In standby mode, the target voltage value of VDD1P8 is 1.725V.
kDCDC_1P8StbyTarget1P75V	In standby mode, the target voltage value of VDD1P8 is 1.75V.
kDCDC_1P8StbyTarget1P775V	In standby mode, the target voltage value of VDD1P8 is 1.775V.
kDCDC_1P8StbyTarget1P8V	In standby mode, the target voltage value of VDD1P8 is 1.8V.
kDCDC_1P8StbyTarget1P825V	In standby mode, the target voltage value of VDD1P8 is 1.825V.
kDCDC_1P8StbyTarget1P85V	In standby mode, the target voltage value of VDD1P8 is 1.85V.
kDCDC_1P8StbyTarget1P875V	In standby mode, the target voltage value of VDD1P8 is 1.875V.
kDCDC_1P8StbyTarget1P9V	In standby mode, the target voltage value of VDD1P8 is 1.9V.
kDCDC_1P8StbyTarget1P925V	In standby mode, the target voltage value of VDD1P8 is 1.925V.
kDCDC_1P8StbyTarget1P95V	In standby mode, the target voltage value of VDD1P8 is 1.95V.
kDCDC_1P8StbyTarget1P975V	In standby mode, the target voltage value of VDD1P8 is 1.975V.
kDCDC_1P8StbyTarget2P0V	In standby mode, the target voltage value of VDD1P8 is 2.0V.
kDCDC_1P8StbyTarget2P025V	In standby mode, the target voltage value of VDD1P8 is 2.025V.
kDCDC_1P8StbyTarget2P05V	In standby mode, the target voltage value of VDD1P8 is 2.05V.
kDCDC_1P8StbyTarget2P075V	In standby mode, the target voltage value of VDD1P8 is 2.075V.
kDCDC_1P8StbyTarget2P1V	In standby mode, the target voltage value of VDD1P8 is 2.1V.
kDCDC_1P8StbyTarget2P125V	In standby mode, the target voltage value of VDD1P8 is 2.125V.
kDCDC_1P8StbyTarget2P15V	In standby mode, the target voltage value of VDD1P8 is 2.15V.
kDCDC_1P8StbyTarget2P175V	In standby mode, the target voltage value of VDD1P8 is 2.175V.
kDCDC_1P8StbyTarget2P2V	In standby mode, the target voltage value of VDD1P8 is 2.2V.
kDCDC_1P8StbyTarget2P225V	In standby mode, the target voltage value of VDD1P8 is 2.225V.
kDCDC_1P8StbyTarget2P25V	In standby mode, the target voltage value of VDD1P8 is 2.25V.
kDCDC_1P8StbyTarget2P275V	In standby mode, the target voltage value of VDD1P8 is 2.275V.
kDCDC_1P8StbyTarget2P3V	In standby mode, the target voltage value is 2.3V.

◆ _dcdc_status_flags

enum _dcdc_status_flags

The enumeration of DCDC status flags.

Enumerator
kDCDC_AlreadySettledStatusFlag	Indicate DCDC status. 1'b1: DCDC already settled 1'b0: DCDC is settling.

◆ _dcdc_trim_input_mode

enum _dcdc_trim_input_mode

DCDC trim input mode, including sample trim input and hold trim input.

Enumerator
kDCDC_SampleTrimInput	Sample trim input.
kDCDC_HoldTrimInput	Hold trim input.

◆ _dcdc_voltage_output_sel

enum _dcdc_voltage_output_sel

Voltage output option.

Enumerator
kDCDC_VoltageOutput1P8	1.8V output.
kDCDC_VoltageOutput1P0	1.0V output.

Function Documentation

◆ DCDC_BootIntoCCM()

void DCDC_BootIntoCCM ( DCDC_Type * base )

Boots DCDC into CCM(continous conduction mode).

pwd_zcd=0x1;
pwd_cmp_offset=0x0;
dcdc_loopctrl_en_rcscale=0x3;

Parameters

base	DCDC peripheral base address.

brief Boots DCDC into CCM(continous conduction mode).

pwd_zcd=0x1; pwd_cmp_offset=0x0; dcdc_loopctrl_en_rcscale=0x3;

param base DCDC peripheral base address.

brief Boot DCDC into CCM(continous conduction mode).

pwd_zcd=0x1; pwd_cmp_offset=0x0; dcdc_loopctrl_en_rcscale=0x3;

param base DCDC peripheral base address.

◆ DCDC_BootIntoDCM()

void DCDC_BootIntoDCM ( DCDC_Type * base )

Boots DCDC into DCM(discontinous conduction mode).

pwd_zcd=0x0;
DM_CTRL = 1'b1;
pwd_cmp_offset=0x0;
dcdc_loopctrl_en_rcscale=0x3 or 0x5;
DCM_set_ctrl=1'b1;

Parameters

base	DCDC peripheral base address.

brief Boots DCDC into DCM(discontinous conduction mode).

pwd_zcd=0x0; DM_CTRL = 1'b1; pwd_cmp_offset=0x0; dcdc_loopctrl_en_rcscale=0x3 or 0x5; DCM_set_ctrl=1'b1;

param base DCDC peripheral base address.

brief Boot DCDC into DCM(discontinous conduction mode).

pwd_zcd=0x0; pwd_cmp_offset=0x0; dcdc_loopctrl_en_rcscale= 0x5; DCM_set_ctrl=1'b1;

param base DCDC peripheral base address.

◆ DCDC_Deinit()

void DCDC_Deinit ( DCDC_Type * base )

De-initializes the DCDC module.

Parameters

base	DCDC peripheral base address.

brief De-initializes the DCDC module.

param base DCDC peripheral base address.

brief Disable the access to DCDC registers.

param base DCDC peripheral base address.

◆ DCDC_GetDefaultConfig()

void DCDC_GetDefaultConfig ( dcdc_config_t * config )

Gets the default setting for DCDC, such as control mode, etc.

This function initializes the user configuration structure to a default value. The default values are:

config->controlMode                    = kDCDC_StaticControl;
config->trimInputMode                  = kDCDC_SampleTrimInput;
config->enableDcdcTimeout              = false;
config->enableSwitchingConverterOutput = false;

Parameters

config Pointer to configuration structure. See to dcdc_config_t.

brief Gets the default setting for DCDC, such as control mode, etc.

This function initializes the user configuration structure to a default value. The default values are: code config->controlMode = kDCDC_StaticControl; config->trimInputMode = kDCDC_SampleTrimInput; config->enableDcdcTimeout = false; config->enableSwitchingConverterOutput = false; endcode

param config Pointer to configuration structure. See to dcdc_config_t.

◆ DCDC_GetDefaultDetectionConfig()

void DCDC_GetDefaultDetectionConfig ( dcdc_detection_config_t * config )

Gets the default setting for detection configuration.

The default configuration are set according to responding registers' setting when powered on. They are:

config->enableXtalokDetection = false;
config->powerDownOverVoltageVdd1P8Detection = true;
config->powerDownOverVoltageVdd1P0Detection = true;
config->powerDownLowVoltageDetection  = false;
config->powerDownOverCurrentDetection = true;
config->powerDownPeakCurrentDetection = true;
config->powerDownZeroCrossDetection   = true;
config->OverCurrentThreshold          = kDCDC_OverCurrentThresholdAlt0;
config->PeakCurrentThreshold          = kDCDC_PeakCurrentThresholdAlt0;

Parameters

config Pointer to configuration structure. See to dcdc_detection_config_t.

brief Gets the default setting for detection configuration.

The default configuration are set according to responding registers' setting when powered on. They are: code config->enableXtalokDetection = false; config->powerDownOverVoltageVdd1P8Detection = true; config->powerDownOverVoltageVdd1P0Detection = true; config->powerDownLowVoltageDetection = false; config->powerDownOverCurrentDetection = true; config->powerDownPeakCurrentDetection = true; config->powerDownZeroCrossDetection = true; config->PeakCurrentThreshold = kDCDC_PeakCurrentRunMode250mALPMode1P5A; endcode

param config Pointer to configuration structure. See to "dcdc_detection_config_t"

brief Get the default setting for detection configuration.

The default configuration are set according to responding registers' setting when powered on. They are: code config->enableXtalokDetection = false; config->powerDownOverVoltageDetection = true; config->powerDownLowVlotageDetection = false; config->powerDownOverCurrentDetection = true; config->powerDownPeakCurrentDetection = true; config->powerDownZeroCrossDetection = true; config->OverCurrentThreshold = kDCDC_OverCurrentThresholdAlt0; config->PeakCurrentThreshold = kDCDC_PeakCurrentThresholdAlt0; endcode

param config Pointer to configuration structure. See to "dcdc_detection_config_t"

◆ DCDC_GetDefaultLoopControlConfig()

void DCDC_GetDefaultLoopControlConfig ( dcdc_loop_control_config_t * config )

Gets the default setting for loop control configuration.

The default configuration are set according to responding registers' setting when powered on. They are:

config->enableCommonHysteresis = false;
config->enableCommonThresholdDetection = false;
config->enableInvertHysteresisSign = false;
config->enableRCThresholdDetection = false;
config->enableRCScaleCircuit = 0U;
config->complementFeedForwardStep = 0U;
config->controlParameterMagnitude = 2U;
config->integralProportionalRatio = 2U;

Parameters

config Pointer to configuration structure. See to dcdc_loop_control_config_t.

brief Gets the default setting for loop control configuration.

The default configuration are set according to responding registers' setting when powered on. They are: code config->enableCommonHysteresis = false; config->enableCommonThresholdDetection = false; config->enableInvertHysteresisSign = false; config->enableRCThresholdDetection = false; config->enableRCScaleCircuit = 0U; config->complementFeedForwardStep = 0U; config->controlParameterMagnitude = 2U; config->integralProportionalRatio = 2U; endcode

param config Pointer to configuration structure. See to "dcdc_loop_control_config_t"

brief Get the default setting for loop control configuration.

The default configuration are set according to responding registers' setting when powered on. They are: code config->enableCommonHysteresis = false; config->enableCommonThresholdDetection = false; config->enableInvertHysteresisSign = false; config->enableRCThresholdDetection = false; config->enableRCScaleCircuit = 0U; config->complementFeedForwardStep = 0U; endcode

param config Pointer to configuration structure. See to "dcdc_loop_control_config_t"

◆ DCDC_GetDefaultLowPowerConfig()

void DCDC_GetDefaultLowPowerConfig ( dcdc_low_power_config_t * config )

Gets the default setting for low power configuration.

The default configuration are set according to responding registers' setting when powered on. They are:

config->enableAdjustHystereticValue = false;

Parameters

config Pointer to configuration structure. See to dcdc_low_power_config_t.

brief Gets the default setting for low power configuration.

The default configuration are set according to responding registers' setting when powered on. They are: code config->enableAdjustHystereticValue = false; endcode

param config Pointer to configuration structure. See to "dcdc_low_power_config_t"

brief Get the default setting for low power configuration.

The default configuration are set according to responding registers' setting when powered on. They are: code config->enableOverloadDetection = true; config->enableAdjustHystereticValue = false; config->countChargingTimePeriod = kDCDC_CountChargingTimePeriod8Cycle; config->countChargingTimeThreshold = kDCDC_CountChargingTimeThreshold32; endcode

param config Pointer to configuration structure. See to "dcdc_low_power_config_t"

◆ DCDC_Init()

void DCDC_Init	(	DCDC_Type *	base,
		const dcdc_config_t *	config
	)

Initializes the basic resource of DCDC module, such as control mode, etc.

Parameters

base	DCDC peripheral base address.
config	Pointer to the dcdc_config_t structure.

brief Initializes the basic resource of DCDC module, such as control mode, etc.

param base DCDC peripheral base address. param config Pointer to the configuration structure.

◆ DCDC_SetClockSource()

void DCDC_SetClockSource	(	DCDC_Type *	base,
		dcdc_clock_source_t	clockSource
	)

Configures the DCDC clock source.

Parameters

base	DCDC peripheral base address.
clockSource	Clock source for DCDC. See to dcdc_clock_source_t.

brief Configures the DCDC clock source.

param base DCDC peripheral base address. param clockSource Clock source for DCDC. See to "dcdc_clock_source_t".

brief Configure the DCDC clock source.

param base DCDC peripheral base address. param clockSource Clock source for DCDC. See to "dcdc_clock_source_t".

◆ DCDC_SetDetectionConfig()

void DCDC_SetDetectionConfig	(	DCDC_Type *	base,
		const dcdc_detection_config_t *	config
	)

Configures the DCDC detection.

Parameters

base	DCDC peripheral base address.
config	Pointer to configuration structure. See to dcdc_detection_config_t.

breif Configures the DCDC detection.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_detection_config_t"

breif Configure the DCDC detection.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_detection_config_t"

◆ DCDC_SetInternalRegulatorConfig()

void DCDC_SetInternalRegulatorConfig	(	DCDC_Type *	base,
		const dcdc_internal_regulator_config_t *	config
	)

Configures the DCDC internal regulator.

Parameters

base	DCDC peripheral base address.
config	Pointer to configuration structure. See to dcdc_internal_regulator_config_t.

brief Configures the DCDC internal regulator.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_internal_regulator_config_t".

brief Configure the DCDC internal regulator.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_internal_regulator_config_t".

◆ DCDC_SetLoopControlConfig()

void DCDC_SetLoopControlConfig	(	DCDC_Type *	base,
		const dcdc_loop_control_config_t *	config
	)

Configures the DCDC loop control.

Parameters

base	DCDC peripheral base address.
config	Pointer to configuration structure. See to dcdc_loop_control_config_t.

brief Configures the DCDC loop control.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_loop_control_config_t".

brief Configure the DCDC loop control.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_loop_control_config_t".

◆ DCDC_SetLowPowerConfig()

void DCDC_SetLowPowerConfig	(	DCDC_Type *	base,
		const dcdc_low_power_config_t *	config
	)

Configures the DCDC low power.

Parameters

base	DCDC peripheral base address.
config	Pointer to configuration structure. See to dcdc_low_power_config_t.

brief Configures the DCDC low power.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_low_power_config_t".

brief Configure the DCDC low power.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_low_power_config_t".

◆ DCDC_SetMinPowerConfig()

void DCDC_SetMinPowerConfig	(	DCDC_Type *	base,
		const dcdc_min_power_config_t *	config
	)

Configures for the min power.

Parameters

base	DCDC peripheral base address.
config	Pointer to configuration structure. See to dcdc_min_power_config_t.

brief Configures for the min power.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_min_power_config_t".

brief Configure for the min power.

param base DCDC peripheral base address. param config Pointer to configuration structure. See to "dcdc_min_power_config_t".

◆ DCDC_SetPointInit()

void DCDC_SetPointInit	(	DCDC_Type *	base,
		const dcdc_setpoint_config_t *	config
	)

Initializes DCDC module when the control mode selected as setpoint mode.

Note: The function should be invoked in the initial step to config the DCDC via setpoint control mode.

Parameters

base	DCDC peripheral base address.
config	The pointer to the structure dcdc_setpoint_config_t.

brief Initializes DCDC module when the control mode selected as setpoint mode.

note The function should be invoked in the initial step to config the DCDC via setpoint control mode.

param base DCDC peripheral base address. param config The pointer to the structure dcdc_setpoint_config_t.

Data Structures

Macros

Typedefs

Enumerations

Initialization and De-initialization Interfaces

Detection Related Inferfaces

DCDC Miscellaneous Inferfaces

Setpoint Control Related Interfaces

Application Guideline Interfaces

Detailed Description

Macro Definition Documentation

◆ BUCK_MODE_VDD1P0_TARGET_VOLTAGE

◆ BUCK_MODE_VDD1P8_TARGET_VOLTAGE

◆ FSL_DCDC_DRIVER_VERSION

◆ STANDBY_MODE_VDD1P0_TARGET_VOLTAGE

◆ STANDBY_MODE_VDD1P8_TARGET_VOLTAGE

Enumeration Type Documentation

◆ _dcdc_buck_mode_1P0_target_vol

◆ _dcdc_buck_mode_1P8_target_vol

◆ _dcdc_clock_source

◆ _dcdc_comparator_current_bias

◆ _dcdc_control_mode

◆ _dcdc_peak_current_threshold

◆ _dcdc_setpoint_map

◆ _dcdc_standby_mode_1P0_target_vol

◆ _dcdc_standby_mode_1P8_target_vol

◆ _dcdc_status_flags

◆ _dcdc_trim_input_mode

◆ _dcdc_voltage_output_sel

Function Documentation

◆ DCDC_BootIntoCCM()

◆ DCDC_BootIntoDCM()

◆ DCDC_Deinit()

◆ DCDC_GetDefaultConfig()

◆ DCDC_GetDefaultDetectionConfig()

◆ DCDC_GetDefaultLoopControlConfig()

◆ DCDC_GetDefaultLowPowerConfig()

◆ DCDC_Init()

◆ DCDC_SetClockSource()

◆ DCDC_SetDetectionConfig()

◆ DCDC_SetInternalRegulatorConfig()

◆ DCDC_SetLoopControlConfig()

◆ DCDC_SetLowPowerConfig()

◆ DCDC_SetMinPowerConfig()

◆ DCDC_SetPointInit()