Generic Flash API to wrap specific device drivers. More...

Data Structures
struct	rtems_flashdev_region
	General definition for on flash device. More...

struct	rtems_flashdev_region_table
	Struct holding region definitions. More...

struct	rtems_flashdev_ioctl_page_info
	Page information returned from IOCTL calls. More...

struct	rtems_flashdev_ioctl_sector_info
	Sector information returned from IOCTL calls. More...

struct	rtems_flashdev
	Flash device. More...

Macros
#define	RTEMS_FLASHDEV_IOCTL_OBTAIN 0
	Obtains the flash device.

#define	RTEMS_FLASHDEV_IOCTL_RELEASE 1
	Releases the flash device.

#define	RTEMS_FLASHDEV_IOCTL_JEDEC_ID 2
	Returns the JEDEC ID of the flash device. This IOCTL call is informational only.

#define	RTEMS_FLASHDEV_IOCTL_ERASE 3
	Erases flash device.

#define	RTEMS_FLASHDEV_IOCTL_REGION_SET 4
	Set a region that limits read, write and erase calls to within it. Regions are file descriptor specific and limited to a single region per file descriptor and 32 regions total per flash device. Regions can be changed or updated by calling this IOCTL again.

#define	RTEMS_FLASHDEV_IOCTL_REGION_UNSET 5
	Removes the set region on the file descriptor.

#define	RTEMS_FLASHDEV_IOCTL_TYPE 6
	Returns the type of flash device (e.g. NOR or NAND).

#define	RTEMS_FLASHDEV_IOCTL_PAGEINFO_BY_OFFSET 7
	Get the size and address of flash page at given offset.

#define	RTEMS_FLASHDEV_IOCTL_PAGEINFO_BY_INDEX 8
	Get the size and address of nth flash page where n is index passed in.

#define	RTEMS_FLASHDEV_IOCTL_PAGE_COUNT 9
	Get the number of pages in flash device.

#define	RTEMS_FLASHDEV_IOCTL_WRITE_BLOCK_SIZE 10
	Get the minimum write size supported by the driver.

#define	RTEMS_FLASHDEV_IOCTL_SECTORINFO_BY_OFFSET 11
	Get the size and address of flash erase sector at given offset.

#define	RTEMS_FLASHDEV_IOCTL_SECTOR_COUNT 12
	Get the number of erase sectors in flash device.

#define	RTEMS_FLASHDEV_MAX_REGIONS 32
	The maximum number of region limited file descriptors allowed to be open at once.

Typedefs
typedef enum rtems_flashdev_flash_type	rtems_flashdev_flash_type
	Enum for flash type returned from IOCTL call.

typedef struct rtems_flashdev_region	rtems_flashdev_region
	General definition for on flash device.

typedef struct rtems_flashdev_region_table	rtems_flashdev_region_table
	Struct holding region definitions.

typedef struct rtems_flashdev_ioctl_page_info	rtems_flashdev_ioctl_page_info
	Page information returned from IOCTL calls.

typedef struct rtems_flashdev_ioctl_sector_info	rtems_flashdev_ioctl_sector_info
	Sector information returned from IOCTL calls.

Enumerations
enum	rtems_flashdev_flash_type { RTEMS_FLASHDEV_NOR , RTEMS_FLASHDEV_NAND }
	Enum for flash type returned from IOCTL call. More...

Functions
rtems_flashdev *	rtems_flashdev_alloc_and_init (size_t size)
	Allocate and initialize the flash device.

int	rtems_flashdev_init (rtems_flashdev *flash)
	Initialize the flash device.

int	rtems_flashdev_register (rtems_flashdev flash, const char flash_path)
	Register the flash device.

void	rtems_flashdev_destroy (rtems_flashdev *flash)
	Destroys the flash device.

void	rtems_flashdev_destroy_and_free (rtems_flashdev *flash)
	Destroys the flash device and frees its memory.

Detailed Description

Generic Flash API to wrap specific device drivers.

Macro Definition Documentation

◆ RTEMS_FLASHDEV_IOCTL_ERASE

#define RTEMS_FLASHDEV_IOCTL_ERASE 3

Erases flash device.

Parameters

[in] erase_args Pointer to rtems_flashdev_region struct containing offset and size of erase to be performed.

◆ RTEMS_FLASHDEV_IOCTL_JEDEC_ID

#define RTEMS_FLASHDEV_IOCTL_JEDEC_ID 2

Returns the JEDEC ID of the flash device. This IOCTL call is informational only.

Parameters

[out] jedec_id Pointer to uint32_t in which the JEDEC ID is returned in.

◆ RTEMS_FLASHDEV_IOCTL_OBTAIN

#define RTEMS_FLASHDEV_IOCTL_OBTAIN 0

Obtains the flash device.

This command has no argument.

◆ RTEMS_FLASHDEV_IOCTL_PAGE_COUNT

#define RTEMS_FLASHDEV_IOCTL_PAGE_COUNT 9

Get the number of pages in flash device.

Parameters

[out] count Integer containing the number of pages.

◆ RTEMS_FLASHDEV_IOCTL_PAGEINFO_BY_INDEX

#define RTEMS_FLASHDEV_IOCTL_PAGEINFO_BY_INDEX 8

Get the size and address of nth flash page where n is index passed in.

The index ignores the region limiting.

Parameters

[in,out] rtems_flashdev_ioctl_page_info arg Pointer to struct with index and space for return values.

◆ RTEMS_FLASHDEV_IOCTL_PAGEINFO_BY_OFFSET

#define RTEMS_FLASHDEV_IOCTL_PAGEINFO_BY_OFFSET 7

Get the size and address of flash page at given offset.

The offset ignores the region limiting. To find page of region limited offset add the base of the region to the desired offset.

Parameters

[in,out] rtems_flashdev_ioctl_page_info arg Pointer to struct with offset and space for return values.

◆ RTEMS_FLASHDEV_IOCTL_REGION_SET

#define RTEMS_FLASHDEV_IOCTL_REGION_SET 4

Set a region that limits read, write and erase calls to within it. Regions are file descriptor specific and limited to a single region per file descriptor and 32 regions total per flash device. Regions can be changed or updated by calling this IOCTL again.

Parameters

[in] region Pointer to rtems_flashdev_region struct containing base and length of defined region.

◆ RTEMS_FLASHDEV_IOCTL_REGION_UNSET

#define RTEMS_FLASHDEV_IOCTL_REGION_UNSET 5

Removes the set region on the file descriptor.

This command has no argument.

◆ RTEMS_FLASHDEV_IOCTL_RELEASE

#define RTEMS_FLASHDEV_IOCTL_RELEASE 1

Releases the flash device.

This command has no argument.

◆ RTEMS_FLASHDEV_IOCTL_SECTOR_COUNT

#define RTEMS_FLASHDEV_IOCTL_SECTOR_COUNT 12

Get the number of erase sectors in flash device.

Parameters

[out] count Integer containing the number of sectors.

◆ RTEMS_FLASHDEV_IOCTL_SECTORINFO_BY_OFFSET

#define RTEMS_FLASHDEV_IOCTL_SECTORINFO_BY_OFFSET 11

Get the size and address of flash erase sector at given offset.

The offset ignores the region limiting. To find sector of region limited offset add the base of the region to the desired offset.

Parameters

[in,out] rtems_flashdev_ioctl_sector_info arg Pointer to struct with offset and space for return values.

◆ RTEMS_FLASHDEV_IOCTL_TYPE

#define RTEMS_FLASHDEV_IOCTL_TYPE 6

Returns the type of flash device (e.g. NOR or NAND).

Parameters

[out] flash_type Pointer to integer which is set to the flash type macro value.

◆ RTEMS_FLASHDEV_IOCTL_WRITE_BLOCK_SIZE

#define RTEMS_FLASHDEV_IOCTL_WRITE_BLOCK_SIZE 10

Get the minimum write size supported by the driver.

Parameters

[out] count Integer containing the minimum write size.

Enumeration Type Documentation

◆ rtems_flashdev_flash_type

enum rtems_flashdev_flash_type

Enum for flash type returned from IOCTL call.

Enumerator
RTEMS_FLASHDEV_NOR	The flash device is NOR flash.
RTEMS_FLASHDEV_NAND	The flash device is NAND flash.

Function Documentation

◆ rtems_flashdev_alloc_and_init()

rtems_flashdev * rtems_flashdev_alloc_and_init ( size_t size )

Allocate and initialize the flash device.

After a successful allocation and initialization of the flash device it must be destroyed via rtems_flashdev_destroy_and_free().

Parameters

[in] size The number of bytes to allocate.

Return values

NULL	Failed to set up flash device.
non-NULL	The new flash device.

◆ rtems_flashdev_destroy()

void rtems_flashdev_destroy ( rtems_flashdev * flash )

Destroys the flash device.

Parameters

[in] flash The flash device.

◆ rtems_flashdev_destroy_and_free()

void rtems_flashdev_destroy_and_free ( rtems_flashdev * flash )

Destroys the flash device and frees its memory.

Parameters

[in] flash The flash device.

◆ rtems_flashdev_init()

int rtems_flashdev_init ( rtems_flashdev * flash )

Initialize the flash device.

After a successful initialization of the flash device it must be destroyed via rtems_flashdev_destory().

After initialization and before registration read, write, erase, jedec_id and flash_type functions need to be set in the flashdev.

Parameters

[in] flash The flash device to initialize.

Return values

1	Failed to set up flash device.
0	Successful set up of flash device.

◆ rtems_flashdev_register()

int rtems_flashdev_register	(	rtems_flashdev *	flash,
		const char *	flash_path
	)

Register the flash device.

This function always claims ownership of the flash device.

After initialization and before registration read, write, erase, jedec_id and flash_type functions need to be set in the flashdev.

Parameters

[in]	flash	The flash device.
[in]	flash_path	The path to the flash device file.

Return values

0	Successful operation.
non-zero	Failed operation.

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

◆ RTEMS_FLASHDEV_IOCTL_ERASE

◆ RTEMS_FLASHDEV_IOCTL_JEDEC_ID

◆ RTEMS_FLASHDEV_IOCTL_OBTAIN

◆ RTEMS_FLASHDEV_IOCTL_PAGE_COUNT

◆ RTEMS_FLASHDEV_IOCTL_PAGEINFO_BY_INDEX

◆ RTEMS_FLASHDEV_IOCTL_PAGEINFO_BY_OFFSET

◆ RTEMS_FLASHDEV_IOCTL_REGION_SET

◆ RTEMS_FLASHDEV_IOCTL_REGION_UNSET

◆ RTEMS_FLASHDEV_IOCTL_RELEASE

◆ RTEMS_FLASHDEV_IOCTL_SECTOR_COUNT

◆ RTEMS_FLASHDEV_IOCTL_SECTORINFO_BY_OFFSET

◆ RTEMS_FLASHDEV_IOCTL_TYPE

◆ RTEMS_FLASHDEV_IOCTL_WRITE_BLOCK_SIZE

Enumeration Type Documentation

◆ rtems_flashdev_flash_type

Function Documentation

◆ rtems_flashdev_alloc_and_init()

◆ rtems_flashdev_destroy()

◆ rtems_flashdev_destroy_and_free()

◆ rtems_flashdev_init()

◆ rtems_flashdev_register()