Macros
#define	__HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
	Reset DMA handle state.

#define	__HAL_DMA_GET_FS(__HANDLE__) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (DMA_SxFCR_FS)) : 0)
	Return the current DMA Stream FIFO filled level.

#define	__HAL_DMA_ENABLE(__HANDLE__)
	Enable the specified DMA Stream.

#define	__HAL_DMA_DISABLE(__HANDLE__)
	Disable the specified DMA Stream.

#define	__HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__)
	Return the current DMA Stream transfer complete flag.

#define	__HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)
	Return the current DMA Stream half transfer complete flag.

#define	__HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)
	Return the current DMA Stream transfer error flag.

#define	__HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)
	Return the current DMA Stream FIFO error flag.

#define	__HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)
	Return the current DMA Stream direct mode error flag.

#define	__HAL_BDMA_GET_GI_FLAG_INDEX(__HANDLE__)
	Returns the current BDMA Channel Global interrupt flag.

#define	__HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)
	Get the DMA Stream pending flags.

#define	__HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__)
	Clear the DMA Stream pending flags.

#define	DMA_TO_BDMA_IT(__DMA_IT__)

#define	__HAL_BDMA_CHANNEL_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR \|= (DMA_TO_BDMA_IT(__INTERRUPT__)))

#define	__HAL_DMA_STREAM_ENABLE_IT(__HANDLE__, __INTERRUPT__)

#define	__HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__)
	Enable the specified DMA Stream interrupts.

#define	__HAL_BDMA_CHANNEL_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR &= ~(DMA_TO_BDMA_IT(__INTERRUPT__)))

#define	__HAL_DMA_STREAM_DISABLE_IT(__HANDLE__, __INTERRUPT__)

#define	__HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__)
	Disable the specified DMA Stream interrupts.

#define	__HAL_BDMA_CHANNEL_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR & (DMA_TO_BDMA_IT(__INTERRUPT__))))

#define	__HAL_DMA_STREAM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)

#define	__HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)
	Check whether the specified DMA Stream interrupt is enabled or not.

#define	__HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__)
	Writes the number of data units to be transferred on the DMA Stream.

#define	__HAL_DMA_GET_COUNTER(__HANDLE__)
	Returns the number of remaining data units in the current DMAy Streamx transfer.

Detailed Description

Macro Definition Documentation

◆ __HAL_BDMA_GET_GI_FLAG_INDEX

#define __HAL_BDMA_GET_GI_FLAG_INDEX ( __HANDLE__ )

Value:

(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_ISR_GIF0 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_ISR_GIF1 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_ISR_GIF2 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_ISR_GIF3 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_ISR_GIF4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_ISR_GIF5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_ISR_GIF6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_ISR_GIF7 :\
  (uint32_t)0x00000000)

Returns the current BDMA Channel Global interrupt flag.

Parameters

__HANDLE__ DMA handle

Return values

The	specified transfer error flag index.

◆ __HAL_DMA_CLEAR_FLAG

#define __HAL_DMA_CLEAR_FLAG	(	__HANDLE__,
		__FLAG__
	)

Value:

(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7)? (BDMA->IFCR = (__FLAG__))  :\
 ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
 ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
 ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))

Clear the DMA Stream pending flags.

Parameters

__HANDLE__	DMA handle
__FLAG__	specifies the flag to clear. This parameter can be any combination of the following values: DMA_FLAG_TCIFx: Transfer complete flag. DMA_FLAG_HTIFx: Half transfer complete flag. DMA_FLAG_TEIFx: Transfer error flag. DMA_FLAG_DMEIFx: Direct mode error flag. DMA_FLAG_FEIFx: FIFO error flag. Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.

Return values

None

◆ __HAL_DMA_DISABLE

#define __HAL_DMA_DISABLE ( __HANDLE__ )

Value:

((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR &= ~DMA_SxCR_EN) : \

(((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR &= ~BDMA_CCR_EN))

BDMA_Channel_TypeDef

Definition: stm32h723xx.h:619

DMA_Stream_TypeDef

DMA Controller.

Definition: stm32h723xx.h:601

Disable the specified DMA Stream.

Parameters

__HANDLE__ DMA handle

Return values

None

◆ __HAL_DMA_DISABLE_IT

#define __HAL_DMA_DISABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)

Value:

                                                         ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))?\
                                                         (__HAL_DMA_STREAM_DISABLE_IT((__HANDLE__), (__INTERRUPT__))) :\
                                                         (__HAL_BDMA_CHANNEL_DISABLE_IT((__HANDLE__), (__INTERRUPT__))))

Disable the specified DMA Stream interrupts.

Parameters

__HANDLE__	DMA handle
__INTERRUPT__	specifies the DMA interrupt sources to be enabled or disabled. This parameter can be one of the following values: DMA_IT_TC: Transfer complete interrupt mask. DMA_IT_HT: Half transfer complete interrupt mask. DMA_IT_TE: Transfer error interrupt mask. DMA_IT_FE: FIFO error interrupt mask. DMA_IT_DME: Direct mode error interrupt.

Return values

None

◆ __HAL_DMA_ENABLE

#define __HAL_DMA_ENABLE ( __HANDLE__ )

Value:

((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR |= DMA_SxCR_EN) : \

(((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CCR |= BDMA_CCR_EN))

BDMA_CCR_EN

#define BDMA_CCR_EN

Definition: stm32h723xx.h:6835

DMA_SxCR_EN

#define DMA_SxCR_EN

Definition: stm32h723xx.h:8845

Enable the specified DMA Stream.

Parameters

__HANDLE__ DMA handle

Return values

None

◆ __HAL_DMA_ENABLE_IT

#define __HAL_DMA_ENABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)

Value:

                                                        ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))?\
                                                        (__HAL_DMA_STREAM_ENABLE_IT((__HANDLE__), (__INTERRUPT__))) :\
                                                        (__HAL_BDMA_CHANNEL_ENABLE_IT((__HANDLE__), (__INTERRUPT__))))

Enable the specified DMA Stream interrupts.

Parameters

__HANDLE__	DMA handle
__INTERRUPT__	specifies the DMA interrupt sources to be enabled or disabled. This parameter can be one of the following values: DMA_IT_TC: Transfer complete interrupt mask. DMA_IT_HT: Half transfer complete interrupt mask. DMA_IT_TE: Transfer error interrupt mask. DMA_IT_FE: FIFO error interrupt mask. DMA_IT_DME: Direct mode error interrupt.

Return values

None

◆ __HAL_DMA_GET_COUNTER

#define __HAL_DMA_GET_COUNTER ( __HANDLE__ )

Value:

                                           ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \
                                           (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->NDTR) :\
                                           (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CNDTR))

Returns the number of remaining data units in the current DMAy Streamx transfer.

Parameters

__HANDLE__ DMA handle

Return values

The	number of remaining data units in the current DMA Stream transfer.

◆ __HAL_DMA_GET_DME_FLAG_INDEX

#define __HAL_DMA_GET_DME_FLAG_INDEX ( __HANDLE__ )

Value:

(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_DMEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_DMEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_DMEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_DMEIF3_7 :\
  (uint32_t)0x00000000)

Return the current DMA Stream direct mode error flag.

Parameters

__HANDLE__ DMA handle

Return values

The	specified direct mode error flag index.

◆ __HAL_DMA_GET_FE_FLAG_INDEX

#define __HAL_DMA_GET_FE_FLAG_INDEX ( __HANDLE__ )

Value:

(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_FEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_FEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_FEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_FEIF3_7 :\
  (uint32_t)0x00000000)

Return the current DMA Stream FIFO error flag.

Parameters

__HANDLE__ DMA handle

Return values

The	specified FIFO error flag index.

◆ __HAL_DMA_GET_FLAG

#define __HAL_DMA_GET_FLAG	(	__HANDLE__,
		__FLAG__
	)

Value:

(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream7)? (BDMA->ISR & (__FLAG__))  :\
 ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
 ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
 ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))

Get the DMA Stream pending flags.

Parameters

__HANDLE__	DMA handle
__FLAG__	Get the specified flag. This parameter can be any combination of the following values: DMA_FLAG_TCIFx: Transfer complete flag. DMA_FLAG_HTIFx: Half transfer complete flag. DMA_FLAG_TEIFx: Transfer error flag. DMA_FLAG_DMEIFx: Direct mode error flag. DMA_FLAG_FEIFx: FIFO error flag. Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.

Return values

The	state of FLAG (SET or RESET).

◆ __HAL_DMA_GET_FS

#define __HAL_DMA_GET_FS ( __HANDLE__ ) ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (DMA_SxFCR_FS)) : 0)

Return the current DMA Stream FIFO filled level.

Parameters

__HANDLE__ DMA handle

Return values

The

FIFO filling state.

DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full and not empty.
DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
DMA_FIFOStatus_HalfFull: if more than 1 half-full.
DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
DMA_FIFOStatus_Empty: when FIFO is empty
DMA_FIFOStatus_Full: when FIFO is full

◆ __HAL_DMA_GET_HT_FLAG_INDEX

#define __HAL_DMA_GET_HT_FLAG_INDEX ( __HANDLE__ )

Value:

(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_HTIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_HTIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_HTIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_HTIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_HT0   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_HT1   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_HT2   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_HT3   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_HT4   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_HT5   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_HT6   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_HT7   :\
 (uint32_t)0x00000000)

Return the current DMA Stream half transfer complete flag.

Parameters

__HANDLE__ DMA handle

Return values

The	specified half transfer complete flag index.

◆ __HAL_DMA_GET_IT_SOURCE

#define __HAL_DMA_GET_IT_SOURCE	(	__HANDLE__,
		__INTERRUPT__
	)

Value:

                                                            ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \
                                                            (__HAL_DMA_STREAM_GET_IT_SOURCE((__HANDLE__), (__INTERRUPT__))) :\
                                                            (__HAL_BDMA_CHANNEL_GET_IT_SOURCE((__HANDLE__), (__INTERRUPT__))))

Check whether the specified DMA Stream interrupt is enabled or not.

Parameters

__HANDLE__	DMA handle
__INTERRUPT__	specifies the DMA interrupt source to check. This parameter can be one of the following values: DMA_IT_TC: Transfer complete interrupt mask. DMA_IT_HT: Half transfer complete interrupt mask. DMA_IT_TE: Transfer error interrupt mask. DMA_IT_FE: FIFO error interrupt mask. DMA_IT_DME: Direct mode error interrupt.

Return values

The	state of DMA_IT.

◆ __HAL_DMA_GET_TC_FLAG_INDEX

#define __HAL_DMA_GET_TC_FLAG_INDEX ( __HANDLE__ )

Value:

(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TCIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TCIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TCIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TCIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_TC0   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_TC1   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_TC2   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_TC3   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_TC4   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_TC5   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_TC6   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_TC7   :\
 (uint32_t)0x00000000)

Return the current DMA Stream transfer complete flag.

Parameters

__HANDLE__ DMA handle

Return values

The	specified transfer complete flag index.

◆ __HAL_DMA_GET_TE_FLAG_INDEX

#define __HAL_DMA_GET_TE_FLAG_INDEX ( __HANDLE__ )

Value:

(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream3))? DMA_FLAG_TEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream3))? DMA_FLAG_TEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream7))? DMA_FLAG_TEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream7))? DMA_FLAG_TEIF3_7 :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel0))? BDMA_FLAG_TE0   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel1))? BDMA_FLAG_TE1   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel2))? BDMA_FLAG_TE2   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel3))? BDMA_FLAG_TE3   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel4))? BDMA_FLAG_TE4   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel5))? BDMA_FLAG_TE5   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel6))? BDMA_FLAG_TE6   :\
 ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)BDMA_Channel7))? BDMA_FLAG_TE7   :\
 (uint32_t)0x00000000)

Return the current DMA Stream transfer error flag.

Parameters

__HANDLE__ DMA handle

Return values

The	specified transfer error flag index.

◆ __HAL_DMA_RESET_HANDLE_STATE

#define __HAL_DMA_RESET_HANDLE_STATE ( __HANDLE__ ) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)

Reset DMA handle state.

Parameters

__HANDLE__ specifies the DMA handle.

Return values

None

◆ __HAL_DMA_SET_COUNTER

#define __HAL_DMA_SET_COUNTER	(	__HANDLE__,
		__COUNTER__
	)

Value:

                                                        ((IS_DMA_STREAM_INSTANCE((__HANDLE__)->Instance))? \
                                                        (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->NDTR = (uint16_t)(__COUNTER__)) :\
                                                        (((BDMA_Channel_TypeDef *)(__HANDLE__)->Instance)->CNDTR = (uint16_t)(__COUNTER__)))

Writes the number of data units to be transferred on the DMA Stream.

Parameters

__HANDLE__	DMA handle
__COUNTER__	Number of data units to be transferred (from 0 to 65535) Number of data items depends only on the Peripheral data format.

Note: If Peripheral data format is Bytes: number of data units is equal to total number of bytes to be transferred.; If Peripheral data format is Half-Word: number of data units is equal to total number of bytes to be transferred / 2.; If Peripheral data format is Word: number of data units is equal to total number of bytes to be transferred / 4.

Return values

The	number of remaining data units in the current DMAy Streamx transfer.

◆ __HAL_DMA_STREAM_DISABLE_IT

#define __HAL_DMA_STREAM_DISABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)

Value:

(((__INTERRUPT__) != DMA_IT_FE)? \

(((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR &= ~(__INTERRUPT__)) : (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR &= ~(__INTERRUPT__)))

◆ __HAL_DMA_STREAM_ENABLE_IT

#define __HAL_DMA_STREAM_ENABLE_IT	(	__HANDLE__,
		__INTERRUPT__
	)

Value:

(((__INTERRUPT__) != DMA_IT_FE)? \

(((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR |= (__INTERRUPT__)) : (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR |= (__INTERRUPT__)))

◆ __HAL_DMA_STREAM_GET_IT_SOURCE

#define __HAL_DMA_STREAM_GET_IT_SOURCE	(	__HANDLE__,
		__INTERRUPT__
	)

Value:

                                                        (((__INTERRUPT__) != DMA_IT_FE)? \
                                                        (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->CR & (__INTERRUPT__)) : \
                                                        (((DMA_Stream_TypeDef *)(__HANDLE__)->Instance)->FCR & (__INTERRUPT__)))

◆ DMA_TO_BDMA_IT

#define DMA_TO_BDMA_IT ( __DMA_IT__ )

Value:

((((__DMA_IT__) & (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)) == (DMA_IT_TC | DMA_IT_HT | DMA_IT_TE)) ? (BDMA_CCR_TCIE | BDMA_CCR_HTIE |BDMA_CCR_TEIE) :\
 (((__DMA_IT__) & (DMA_IT_TC | DMA_IT_HT)) == (DMA_IT_TC | DMA_IT_HT)) ? (BDMA_CCR_TCIE | BDMA_CCR_HTIE) :\
 (((__DMA_IT__) & (DMA_IT_HT | DMA_IT_TE)) == (DMA_IT_HT | DMA_IT_TE)) ? (BDMA_CCR_HTIE |BDMA_CCR_TEIE)  :\
 (((__DMA_IT__) & (DMA_IT_TC | DMA_IT_TE)) == (DMA_IT_TC | DMA_IT_TE)) ? (BDMA_CCR_TCIE |BDMA_CCR_TEIE)  :\
 ((__DMA_IT__) == DMA_IT_TC) ? BDMA_CCR_TCIE :\
 ((__DMA_IT__) == DMA_IT_HT) ? BDMA_CCR_HTIE :\
 ((__DMA_IT__) == DMA_IT_TE) ? BDMA_CCR_TEIE :\
 (uint32_t)0x00000000)

Macros

Detailed Description

Macro Definition Documentation

◆ __HAL_BDMA_GET_GI_FLAG_INDEX

◆ __HAL_DMA_CLEAR_FLAG

◆ __HAL_DMA_DISABLE

◆ __HAL_DMA_DISABLE_IT

◆ __HAL_DMA_ENABLE

◆ __HAL_DMA_ENABLE_IT

◆ __HAL_DMA_GET_COUNTER

◆ __HAL_DMA_GET_DME_FLAG_INDEX

◆ __HAL_DMA_GET_FE_FLAG_INDEX

◆ __HAL_DMA_GET_FLAG

◆ __HAL_DMA_GET_FS

◆ __HAL_DMA_GET_HT_FLAG_INDEX

◆ __HAL_DMA_GET_IT_SOURCE

◆ __HAL_DMA_GET_TC_FLAG_INDEX

◆ __HAL_DMA_GET_TE_FLAG_INDEX

◆ __HAL_DMA_RESET_HANDLE_STATE

◆ __HAL_DMA_SET_COUNTER

◆ __HAL_DMA_STREAM_DISABLE_IT

◆ __HAL_DMA_STREAM_ENABLE_IT

◆ __HAL_DMA_STREAM_GET_IT_SOURCE

◆ DMA_TO_BDMA_IT