flashd.h File Reference

#include <stdint.h>

Go to the source code of this file.

Macros
#define	GPNVBit_SecurityBit   0
#define	GPNVBit_BootMode   1
#define	GPNVBit_TCMBit1   6
#define	GPNVBit_TCMBit2   7
#define	FLASHD_IsSecurityBitSet()   FLASHD_IsGPNVMSet(0)
#define	FLASHD_SetSecurityBit()   FLASHD_SetGPNVM(0)

Functions
void	FLASHD_Initialize (uint32_t dwMCk, uint32_t dwUseIAP)
	Initializes the flash driver.
uint32_t	FLASHD_Erase (uint32_t dwAddress)
	Erases the entire flash.
uint32_t	FLASHD_EraseSector (uint32_t dwAddress)
	Erases flash by sector.
uint32_t	FLASHD_ErasePages (uint32_t dwAddress, uint32_t dwPageNum)
	Erases flash by pages.
uint32_t	FLASHD_Write (uint32_t dwAddress, const void *pvBuffer, uint32_t dwSize)
	Writes a data buffer in the internal flash.
uint32_t	FLASHD_Lock (uint32_t dwStart, uint32_t dwEnd, uint32_t *pdwActualStart, uint32_t *pdwActualEnd)
	Locks all the regions in the given address range. The actual lock range is reported through two output parameters.
uint32_t	FLASHD_Unlock (uint32_t dwStart, uint32_t dwEnd, uint32_t *pdwActualStart, uint32_t *pdwActualEnd)
	Unlocks all the regions in the given address range. The actual unlock range is reported through two output parameters.
uint32_t	FLASHD_IsLocked (uint32_t dwStart, uint32_t dwEnd)
	Returns the number of locked regions inside the given address range.
uint32_t	FLASHD_SetGPNVM (uint8_t gpnvm)
	Sets the selected GPNVM bit.
uint32_t	FLASHD_ClearGPNVM (uint8_t gpnvm)
	Clears the selected GPNVM bit.
uint32_t	FLASHD_IsGPNVMSet (uint8_t gpnvm)
	Check if the given GPNVM bit is set or not.
uint32_t	FLASHD_ReadUniqueID (uint32_t *pdwUniqueID)

Detailed Description

The flash driver provides the unified interface for flash program operations.

Function Documentation

FLASHD_ClearGPNVM()

uint32_t FLASHD_ClearGPNVM

(

uint8_t

ucGPNVM

)

Clears the selected GPNVM bit.

Parameters

gpnvm

GPNVM bit index.

Returns

0 if successful; otherwise returns an error code.

FLASHD_Erase()

uint32_t FLASHD_Erase

(

uint32_t

dwAddress

)

Erases the entire flash.

Parameters

dwAddress

Flash start address.

Returns

0 if successful; otherwise returns an error code.

FLASHD_ErasePages()

uint32_t FLASHD_ErasePages	(	uint32_t	dwAddress,
		uint32_t	dwPageNum
	)

Erases flash by pages.

Parameters

dwAddress	Start address of be erased pages.
dwPageNum	Number of pages to be erased with EPA command (4, 8, 16, 32)

Returns

0 if successful; otherwise returns an error code.

FLASHD_EraseSector()

uint32_t FLASHD_EraseSector

(

uint32_t

dwAddress

)

Erases flash by sector.

Parameters

dwAddress

Start address of be erased sector.

Returns

0 if successful; otherwise returns an error code.

FLASHD_Initialize()

void FLASHD_Initialize	(	uint32_t	dwMCk,
		uint32_t	dwUseIAP
	)

Initializes the flash driver.

Parameters

dwMCk	Master clock frequency in Hz.
dwUseIAP	0: use EEFC controller interface, 1: use IAP interface. dwUseIAP should be set to 1 when running out of flash.

FLASHD_IsGPNVMSet()

uint32_t FLASHD_IsGPNVMSet

(

uint8_t

ucGPNVM

)

Check if the given GPNVM bit is set or not.

Parameters

gpnvm

GPNVM bit index.

Returns

1 if the given GPNVM bit is currently set; otherwise returns 0.

FLASHD_IsLocked()

uint32_t FLASHD_IsLocked	(	uint32_t	start,
		uint32_t	end
	)

Returns the number of locked regions inside the given address range.

Parameters

start	Start address of range
end	End address of range.

FLASHD_Lock()

uint32_t FLASHD_Lock	(	uint32_t	start,
		uint32_t	end,
		uint32_t *	pActualStart,
		uint32_t *	pActualEnd
	)

Locks all the regions in the given address range. The actual lock range is reported through two output parameters.

Parameters

start	Start address of lock range.
end	End address of lock range.
pActualStart	Start address of the actual lock range (optional).
pActualEnd	End address of the actual lock range (optional).

Returns

0 if successful, otherwise returns an error code.

FLASHD_SetGPNVM()

uint32_t FLASHD_SetGPNVM

(

uint8_t

ucGPNVM

)

Sets the selected GPNVM bit.

Parameters

gpnvm

GPNVM bit index.

Returns

0 if successful; otherwise returns an error code.

FLASHD_Unlock()

uint32_t FLASHD_Unlock	(	uint32_t	start,
		uint32_t	end,
		uint32_t *	pActualStart,
		uint32_t *	pActualEnd
	)

Unlocks all the regions in the given address range. The actual unlock range is reported through two output parameters.

Parameters

start	Start address of unlock range.
end	End address of unlock range.
pActualStart	Start address of the actual unlock range (optional).
pActualEnd	End address of the actual unlock range (optional).

Returns

0 if successful, otherwise returns an error code.

FLASHD_Write()

uint32_t FLASHD_Write	(	uint32_t	dwAddress,
		const void *	pvBuffer,
		uint32_t	dwSize
	)

Writes a data buffer in the internal flash.

Note

This function works in polling mode, and thus only returns when the data has been effectively written.

Parameters

address	Write address.
pBuffer	Data buffer.
size	Size of data buffer in bytes.

Returns

0 if successful, otherwise returns an error code.