#include "chip.h"
#include "stdlib.h"
#include "string.h"
#include <stdint.h>
#include <bsp/iocopy.h>

Macros
#define	SCRAMBLE_KEY 0x0BADDEAD

Functions
__STATIC_INLINE void	QSPI_ConfigureMode (Qspi *pQspi, uint8_t dMode)
	Configure QSPI/SPI mode. More...

__STATIC_INLINE void	QSPI_Configure (Qspi *pQspi, uint32_t dwConfiguration)
	Configure mode register of QSPI. More...

__STATIC_INLINE void	QSPI_SetInstAddr (Qspi *pQspi, uint32_t dwAddr)
	Configures a instruction address for QSPI in QSPI mode. More...

__STATIC_INLINE void	QSPI_SetInst (Qspi *pQspi, uint8_t dwInst, uint8_t dwOpt)
	Configures instruction register with a given command for QSPI. More...

__STATIC_INLINE void	QSPI_SetInstFrame (Qspi pQspi, QspiInstFrame_t pInstFrame)
	Configures instruction frame register of QSPI. More...

__STATIC_INLINE uint32_t	QSPI_GetInstFrame (Qspi *pQspi)
	Reads the Instruction frame of QSPI. More...

__STATIC_INLINE uint16_t	QSPI_ReadSPI (Qspi *pQspi)
	Read QSPI RDR register for SPI mode. More...

__STATIC_INLINE void	QSPI_WriteSPI (Qspi *pQspi, uint16_t wData)
	Write to QSPI Tx register in SPI mode. More...

__STATIC_INLINE void	QSPI_ScrambleData (Qspi *pQspi, uint32_t wKey, uint8_t EnableFlag, uint8_t Random)
	Configures QSPI scrambling with a given Key. More...

void	QSPI_Enable (Qspi *pQspi)
	Enables a QSPI peripheral. More...

void	QSPI_Disable (Qspi *pQspi)
	Disables a QSPI peripheral. More...

void	QSPI_SwReset (Qspi *pQspi)
	Resets a QSPI peripheral. More...

QspidStatus_t	QSPI_EnableIt (Qspi *pQspi, uint32_t dwSources)
	Enables one or more interrupt sources of a QSPI peripheral. More...

QspidStatus_t	QSPI_DisableIt (Qspi *pQspi, uint32_t dwSources)
	Disables one or more interrupt sources of a QSPI peripheral. More...

uint32_t	QSPI_GetItMask (Qspi *pQspi)
	Return the interrupt mask register. More...

uint32_t	QSPI_GetEnabledItStatus (Qspi *pQspi)
	Returns enabled interrupt status. More...

uint32_t	QSPI_GetStatus (Qspi *pQspi, const QspiStatus_t rStatus)
	Get the current status register of the given QSPI peripheral. More...

void	QSPI_ConfigureClock (Qspi *pQspi, QspiClockMode_t ClockMode, uint32_t dwClockCfg)
	Configures peripheral clock of a QSPI/SPI peripheral. More...

QspidStatus_t	QSPI_ConfigureInterface (Qspid_t *pQspid, QspiMode_t Mode, uint32_t dwConfiguration)
	Configures QSPI/SPI. More...

QspidStatus_t	QSPI_EndTransfer (Qspi *pQspi)
	Ends ongoing transfer by releasing CS of QSPI peripheral. More...

QspidStatus_t	QSPI_SingleReadSPI (Qspid_t pQspid, uint16_t const pData)
	Reads the data received by a SPI peripheral. This method must be called after a successful SPI_Write call. More...

QspidStatus_t	QSPI_MultiReadSPI (Qspid_t pQspid, uint16_t const pData, uint32_t NumOfBytes)
	Reads multiple data received by a SPI peripheral. This method must be called after a successful SPI_Write call. More...

QspidStatus_t	QSPI_SingleWriteSPI (Qspid_t pQspid, uint16_t const pData)
	Sends a single data through a SPI peripheral. More...

QspidStatus_t	QSPI_MultiWriteSPI (Qspid_t pQspid, uint16_t const pData, uint32_t NumOfBytes)
	Sends multiple data through a SPI peripheral. More...

QspidStatus_t	QSPI_SendCommand (Qspid_t *pQspid, uint8_t const KeepCfg)
	Send an instruction over QSPI (oly a flash command no data) More...

QspidStatus_t	QSPI_SendCommandWithData (Qspid_t *pQspid, uint8_t const KeepCfg)
	Send instruction over QSPI with data. More...

QspidStatus_t	QSPI_ReadCommand (Qspid_t *pQspid, uint8_t const KeepCfg)
	Send instruction over QSPI to read data. More...

QspidStatus_t	QSPI_EnableMemAccess (Qspid_t *pQspid, uint8_t const KeepCfg, uint8_t ScrambleFlag)
	Sends an instruction over QSPI and configures other related address like Addr , Frame and synchronise bus access before data read or write. More...

QspidStatus_t	QSPI_ReadWriteMem (Qspid_t *pQspid, Access_t const ReadWrite)
	Writes or reads the QSPI memory (0x80000000) to transmit or receive data from Flash memory. More...

Detailed Description

Implementation of Serial Peripheral Interface (QSPI) controller.

Function Documentation

◆ QSPI_Configure()

__STATIC_INLINE void QSPI_Configure	(	Qspi *	pQspi,
		uint32_t	dwConfiguration
	)

Configure mode register of QSPI.

Parameters

pQspi Pointer to a Qspi instance.

◆ QSPI_ConfigureClock()

void QSPI_ConfigureClock	(	Qspi *	pQspi,
		QspiClockMode_t	ClockMode,
		uint32_t	dwClockCfg
	)

Configures peripheral clock of a QSPI/SPI peripheral.

Parameters

pQspi	Pointer to an Qspi instance.
dwConfiguration	Desired clock configuration.

◆ QSPI_ConfigureInterface()

QspidStatus_t QSPI_ConfigureInterface	(	Qspid_t *	pQspid,
		QspiMode_t	Mode,
		uint32_t	dwConfiguration
	)

Configures QSPI/SPI.

Parameters

pQspi	Pointer to an Qspi instance.
Mode	Mode for QSPI or SPI
dwConfiguration	Config of SPI or QSPI mode

◆ QSPI_ConfigureMode()

__STATIC_INLINE void QSPI_ConfigureMode	(	Qspi *	pQspi,
		uint8_t	dMode
	)

Configure QSPI/SPI mode.

Parameters

pQspi Pointer to a Qspi instance.

◆ QSPI_Disable()

void QSPI_Disable ( Qspi * pQspi )

Disables a QSPI peripheral.

Parameters

pQspi Pointer to a Qspi instance.

◆ QSPI_DisableIt()

QspidStatus_t QSPI_DisableIt	(	Qspi *	pQspi,
		uint32_t	dwSources
	)

Disables one or more interrupt sources of a QSPI peripheral.

Parameters

pQspi	Pointer to a Qspi instance.
sources	Bitwise OR of selected interrupt sources.

◆ QSPI_Enable()

void QSPI_Enable ( Qspi * pQspi )

Enables a QSPI peripheral.

Parameters

pQspi Pointer to a Qspi instance.

◆ QSPI_EnableIt()

QspidStatus_t QSPI_EnableIt	(	Qspi *	pQspi,
		uint32_t	dwSources
	)

Enables one or more interrupt sources of a QSPI peripheral.

Parameters

pQspi	Pointer to a Qspi instance.
sources	Bitwise OR of selected interrupt sources.

◆ QSPI_EnableMemAccess()

QspidStatus_t QSPI_EnableMemAccess	(	Qspid_t *	pQspid,
		uint8_t const	KeepCfg,
		uint8_t	ScrambleFlag
	)

Sends an instruction over QSPI and configures other related address like Addr , Frame and synchronise bus access before data read or write.

Parameters

pQspi	Pointer to an Qspi instance.
KeepCfg	To keep Instruction from value or resets to zero
ScrambleFlag	Enable or disable scramble on QSPI

Returns: Returns 1 if At least one instruction end has been detected since the last read of QSPI_SR.; otherwise returns 0.

◆ QSPI_EndTransfer()

QspidStatus_t QSPI_EndTransfer ( Qspi * pQspi )

Ends ongoing transfer by releasing CS of QSPI peripheral.

Parameters

pQspi Pointer to an Qspi instance.

◆ QSPI_GetEnabledItStatus()

uint32_t QSPI_GetEnabledItStatus ( Qspi * pQspi )

Returns enabled interrupt status.

Returns: Qspi interrupt mask register.

◆ QSPI_GetInstFrame()

__STATIC_INLINE uint32_t QSPI_GetInstFrame ( Qspi * pQspi )

Reads the Instruction frame of QSPI.

Parameters

pQspi Pointer to an Qspi instance.

◆ QSPI_GetItMask()

uint32_t QSPI_GetItMask ( Qspi * pQspi )

Return the interrupt mask register.

Returns: Qspi interrupt mask register.

◆ QSPI_GetStatus()

uint32_t QSPI_GetStatus	(	Qspi *	pQspi,
		const QspiStatus_t	rStatus
	)

Get the current status register of the given QSPI peripheral.

Note: This resets the internal value of the status register, so further read may yield different values.

Parameters

pQspi	Pointer to a Qspi instance.
rStatus	Compare status with given status bit

Returns: QSPI status register.

◆ QSPI_MultiReadSPI()

QspidStatus_t QSPI_MultiReadSPI	(	Qspid_t *	pQspid,
		uint16_t *const	pData,
		uint32_t	NumOfBytes
	)

Reads multiple data received by a SPI peripheral. This method must be called after a successful SPI_Write call.

Parameters

pQspid	Pointer to a Qspi instance.
pData	Pointer to read buffer
NumOfBytes	Num of bytes to read

Returns: Qspi status

◆ QSPI_MultiWriteSPI()

QspidStatus_t QSPI_MultiWriteSPI	(	Qspid_t *	pQspid,
		uint16_t const *	pData,
		uint32_t	NumOfBytes
	)

Sends multiple data through a SPI peripheral.

Parameters

pQspid	Pointer to a Qspi instance.
pData	Pointer to a Tx buffer
NumOfBytes	Num of data to send.

◆ QSPI_ReadCommand()

QspidStatus_t QSPI_ReadCommand	(	Qspid_t *	pQspid,
		uint8_t const	KeepCfg
	)

Send instruction over QSPI to read data.

Parameters

pQspi	Pointer to an Qspi instance.
KeepCfg	To keep Instruction from value or resets to zero

Returns: Returns 1 if At least one instruction end has been detected since the last read of QSPI_SR.; otherwise returns 0.

◆ QSPI_ReadSPI()

__STATIC_INLINE uint16_t QSPI_ReadSPI ( Qspi * pQspi )

Read QSPI RDR register for SPI mode.

Parameters

pQspi Pointer to an Qspi instance.

◆ QSPI_ReadWriteMem()

QspidStatus_t QSPI_ReadWriteMem	(	Qspid_t *	pQspid,
		Access_t const	ReadWrite
	)

Writes or reads the QSPI memory (0x80000000) to transmit or receive data from Flash memory.

Parameters

pQspi	Pointer to an Qspi instance.
ReadWrite	Flag to indicate read/write QSPI memory access

Returns: Returns 1 if At least one instruction end has been detected since the last read of QSPI_SR.; otherwise returns 0.

◆ QSPI_ScrambleData()

__STATIC_INLINE void QSPI_ScrambleData	(	Qspi *	pQspi,
		uint32_t	wKey,
		uint8_t	EnableFlag,
		uint8_t	Random
	)

Configures QSPI scrambling with a given Key.

Parameters

pQspi	Pointer to an Qspi instance.
wKey	Key for scramble/unscramble
EnableFlag	Enable/disable scramble
Random	Add random value with given key

◆ QSPI_SendCommand()

QspidStatus_t QSPI_SendCommand	(	Qspid_t *	pQspid,
		uint8_t const	KeepCfg
	)

Send an instruction over QSPI (oly a flash command no data)

Parameters

pQspi	Pointer to an Qspi instance.
KeepCfg	To keep Instruction fram value or restes to zero

Returns: Returns 1 if At least one instruction end has been detected since the last read of QSPI_SR.; otherwise returns 0.

◆ QSPI_SendCommandWithData()

QspidStatus_t QSPI_SendCommandWithData	(	Qspid_t *	pQspid,
		uint8_t const	KeepCfg
	)

Send instruction over QSPI with data.

Parameters

pQspi	Pointer to an Qspi instance.
KeepCfg	To keep Instruction fram value or restes to zero

Returns: Returns 1 if At least one instruction end has been detected since the last read of QSPI_SR.; otherwise returns 0.

◆ QSPI_SetInst()

__STATIC_INLINE void QSPI_SetInst	(	Qspi *	pQspi,
		uint8_t	dwInst,
		uint8_t	dwOpt
	)

Configures instruction register with a given command for QSPI.

Parameters

pQspi	Pointer to a Qspi instance.
dwInst	Instruction Code
dwOpt	Instruction Code option

◆ QSPI_SetInstAddr()

__STATIC_INLINE void QSPI_SetInstAddr	(	Qspi *	pQspi,
		uint32_t	dwAddr
	)

Configures a instruction address for QSPI in QSPI mode.

Parameters

pQspi	Pointer to a Qspi instance.
dwAddr	Instruction Address

◆ QSPI_SetInstFrame()

__STATIC_INLINE void QSPI_SetInstFrame	(	Qspi *	pQspi,
		QspiInstFrame_t *	pInstFrame
	)

Configures instruction frame register of QSPI.

Parameters

pQspi	Pointer to a Qspi instance.
pInstFrame	Instruction Frame configuration

◆ QSPI_SingleReadSPI()

QspidStatus_t QSPI_SingleReadSPI	(	Qspid_t *	pQspid,
		uint16_t *const	pData
	)

Reads the data received by a SPI peripheral. This method must be called after a successful SPI_Write call.

Parameters

pQspid	Pointer to a Qspi instance.
pData	Buffer to put read value

Returns: Qspi status

◆ QSPI_SingleWriteSPI()

QspidStatus_t QSPI_SingleWriteSPI	(	Qspid_t *	pQspid,
		uint16_t const *	pData
	)

Sends a single data through a SPI peripheral.

Parameters

pQspid	Pointer to a Qspi instance.
pData	Pointer to Tx data

Returns: Qspi status

◆ QSPI_SwReset()

void QSPI_SwReset ( Qspi * pQspi )

Resets a QSPI peripheral.

Parameters

pQspi Pointer to a Qspi instance.

◆ QSPI_WriteSPI()

__STATIC_INLINE void QSPI_WriteSPI	(	Qspi *	pQspi,
		uint16_t	wData
	)

Write to QSPI Tx register in SPI mode.

Parameters

pQspi	Pointer to an Qspi instance.
wData	Data to transmit

Macros

Functions

Detailed Description

Function Documentation

◆ QSPI_Configure()

◆ QSPI_ConfigureClock()

◆ QSPI_ConfigureInterface()

◆ QSPI_ConfigureMode()

◆ QSPI_Disable()

◆ QSPI_DisableIt()

◆ QSPI_Enable()

◆ QSPI_EnableIt()

◆ QSPI_EnableMemAccess()

◆ QSPI_EndTransfer()

◆ QSPI_GetEnabledItStatus()

◆ QSPI_GetInstFrame()

◆ QSPI_GetItMask()

◆ QSPI_GetStatus()

◆ QSPI_MultiReadSPI()

◆ QSPI_MultiWriteSPI()

◆ QSPI_ReadCommand()

◆ QSPI_ReadSPI()

◆ QSPI_ReadWriteMem()

◆ QSPI_ScrambleData()

◆ QSPI_SendCommand()

◆ QSPI_SendCommandWithData()

◆ QSPI_SetInst()

◆ QSPI_SetInstAddr()

◆ QSPI_SetInstFrame()

◆ QSPI_SingleReadSPI()

◆ QSPI_SingleWriteSPI()

◆ QSPI_SwReset()

◆ QSPI_WriteSPI()