MVME3100 Board Support Package. More...

Modules
	BSP_VME_INSTALL_IRQ_MGR Support
	BSP_VME_INSTALL_IRQ_MGR Support Package.

	Definitions
	rtems_irq_number Definitions

	Low-level Driver API
	This API provides driver access to applications that want to use e.g., the second ethernet interface independently from the BSD TCP/IP stack. E.g., for raw ethernet packet communication...

Files
file	bsp.h
	Global BSP definitions.

Macros
#define	BSP_INTERRUPT_STACK_SIZE (16 * 1024)

#define	_IO_BASE 0xe0000000 /* Motload's PCI IO base */

#define	_ISA_MEM_BASE CHRP_ISA_MEM_BASE

#define	PCI_DRAM_OFFSET CHRP_PCI_DRAM_OFFSET

#define	PCI_MEM_BASE 0

#define	PCI_MEM_WIN0 0x80000000

#define	BSP_OPEN_PIC_BASE_OFFSET 0x40000

#define	BSP_OPEN_PIC_BIG_ENDIAN

#define	BSP_8540_CCSR_BASE (0xe1000000)

#define	BSP_UART_IOBASE_COM1 (BSP_8540_CCSR_BASE+0x4500)

#define	BSP_UART_IOBASE_COM2 (BSP_8540_CCSR_BASE+0x4600)

#define	PCI_CONFIG_ADDR (BSP_8540_CCSR_BASE+0x8000)

#define	PCI_CONFIG_DATA (BSP_8540_CCSR_BASE+0x8004)

#define	PCI_CONFIG_WR_ADDR(addr, val) out_be32((uint32_t*)(addr), (val))

#define	BSP_CONSOLE_PORT BSP_UART_COM1

#define	BSP_UART_BAUD_BASE (-9600) /* use existing divisor to determine clock rate */

#define	BSP_UART_USE_SHARED_IRQS

#define	BSP_MVME3100_IRQ_DETECT_REG ((volatile uint8_t *)0xe2000007)

#define	BSP_MVME3100_IRQ_DETECT_REG ((volatile uint8_t *)0xe2000007)

#define	BSP_VPD_I2C_ADDR (0xA8>>1) /* the VPD EEPROM */

#define	BSP_USR0_I2C_ADDR (0xA4>>1) /* the 1st user EEPROM */

#define	BSP_USR1_I2C_ADDR (0xA6>>1) /* the 2nd user EEPROM */

#define	BSP_THM_I2C_ADDR (0x90>>1) /* the DS1621 temperature sensor & thermostat */

#define	BSP_RTC_I2C_ADDR (0xD0>>1) /* the DS1375 wall-clock */

#define	BSP_I2C_BUS_DESCRIPTOR mpc8540_i2c_bus_descriptor

#define	BSP_I2C_BUS0_NAME "/dev/i2c0"

#define	BSP_I2C_VPD_EEPROM_NAME "vpd-eeprom"

#define	BSP_I2C_USR_EEPROM_NAME "usr-eeprom"

#define	BSP_I2C_USR1_EEPROM_NAME "usr1-eeprom"

#define	BSP_I2C_DS1621_NAME "ds1621"

#define	BSP_I2C_THM_NAME BSP_I2C_DS1621_NAME

#define	BSP_I2C_DS1621_RAW_NAME "ds1621-raw"

#define	BSP_I2C_DS1375_RAW_NAME "ds1375-raw"

#define	BSP_I2C_RTC_RAW_NAME BSP_I2C_DS1375_RAW_NAME

#define	BSP_I2C_VPD_EEPROM_DEV_NAME (BSP_I2C_BUS0_NAME "." BSP_I2C_VPD_EEPROM_NAME)

#define	BSP_I2C_USR_EEPROM_DEV_NAME (BSP_I2C_BUS0_NAME "." BSP_I2C_USR_EEPROM_NAME)

#define	BSP_I2C_USR1_EEPROM_DEV_NAME (BSP_I2C_BUS0_NAME "." BSP_I2C_USR1_EEPROM_NAME)

#define	BSP_I2C_DS1621_DEV_NAME (BSP_I2C_BUS0_NAME "." BSP_I2C_DS1621_NAME)

#define	BSP_I2C_THM_DEV_NAME BSP_I2C_DS1621_DEV_NAME

#define	BSP_I2C_DS1621_RAW_DEV_NAME (BSP_I2C_BUS0_NAME "." BSP_I2C_DS1621_RAW_NAME)

#define	BSP_I2C_DS1375_RAW_DEV_NAME (BSP_I2C_BUS0_NAME "." BSP_I2C_DS1375_RAW_NAME)

#define	BSP_EEPROM_BOOTPARMS_NAME BSP_I2C_USR1_EEPROM_DEV_NAME

#define	BSP_EEPROM_BOOTPARMS_SIZE 1024

#define	BSP_EEPROM_BOOTPARMS_OFFSET 0

#define	BSP_BOOTPARMS_WRITE_ENABLE() do { BSP_eeprom_write_enable(); } while (0)

#define	BSP_BOOTPARMS_WRITE_DISABLE() do { BSP_eeprom_write_protect();} while (0)

#define	BSP_MVME3100_SYS_CR ((volatile uint8_t *)0xe2000001)

#define	BSP_MVME3100_SYS_CR_RESET_MSK (7<<5)

#define	BSP_MVME3100_SYS_CR_RESET (5<<5)

#define	BSP_MVME3100_SYS_CR_EEPROM_WP (1<<1)

#define	BSP_MVME3100_SYS_CR_TSTAT_MSK (1<<0)

#define	BSP_MVME3100_SYS_IND_REG ((volatile uint8_t *)0xe2000002)

#define	BSP_LED_BRD_FAIL (1<<0)

#define	BSP_LED_USR1 (1<<1)

#define	BSP_LED_USR2 (1<<2)

#define	BSP_LED_USR3 (1<<3)

#define	BSP_MVME3100_FLASH_CSR ((volatile uint8_t *)0xe2000003)

#define	BSP_MVME3100_FLASH_CSR_FLASH_RDY (1<<0)

#define	BSP_MVME3100_FLASH_CSR_FBT_BLK_SEL (1<<1)

#define	BSP_MVME3100_FLASH_CSR_F_WP_HW (1<<2)

#define	BSP_MVME3100_FLASH_CSR_F_WP_SW (1<<3)

#define	BSP_MVME3100_FLASH_CSR_MAP_SEL (1<<4)

#define	BSP_Convert_decrementer(_value) ((unsigned long long) ((((unsigned long long)BSP_time_base_divisor) * 1000000ULL) /((unsigned long long) BSP_bus_frequency)) * ((unsigned long long) (_value)))

#define	RTEMS_BSP_NETWORK_DRIVER_NAME "tse1"

#define	RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_tsec_attach

Functions
int	BSP_i2c_initialize (void)

uint8_t	BSP_setSysReg (volatile uint8_t *r, uint8_t mask)

uint8_t	BSP_clrSysReg (volatile uint8_t *r, uint8_t mask)

uint8_t	BSP_eeprom_write_protect (void)

uint8_t	BSP_eeprom_write_enable (void)

uint8_t	BSP_setLEDs (uint8_t mask)

uint8_t	BSP_clrLEDs (uint8_t mask)

int	BSP_disconnect_clock_handler (void)

int	BSP_connect_clock_handler (void)

unsigned long	_BSP_clear_hostbridge_errors (int enableMCP, int quiet)

void	BSP_motload_pci_fixup (void)

int	rtems_tsec_attach (struct rtems_bsdnet_ifconfig *ifcfg, int attaching)

char *	save_boot_params (void r3, void r4, void r5, char cmdline_start, char *cmdline_end)

void	zero_bss (void)

void	BSP_vme_config (void)

void	BSP_pciConfigDump_early (void)

Variables
unsigned int	BSP_mem_size

unsigned int	BSP_bus_frequency

unsigned int	BSP_processor_frequency

unsigned int	BSP_time_base_divisor

char *	BSP_commandline_string

Detailed Description

MVME3100 Board Support Package.

Modules

Files

Macros

Functions

Variables

Detailed Description