Install the Tool Suite

2.4. Install the Tool Suite#

You have chosen an installation prefix, the BSP to build, the tool’s architecure and prepared the source for the RSB in the previous sections. We have chosen $HOME/quick-start/rtems/6 as the installation prefix, the erc32 BSP and the SPARC architecture name of sparc-rtems6, and unpacked the RSB source in $HOME/quick-start/src.

The tool suite for RTEMS and the RTEMS sources are tightly coupled. For example, do not use a RTEMS version 6 tool suite with RTEMS version 4.11 or 5 sources and vice versa.

If you are unsure how to specify the build set for the architecture you wish to build, just ask the tool:

$ ../source-builder/sb-set-builder --list-bsets

Build and install the tool suite:

cd $HOME/quick-start/src/rsb/rtems
../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/6 6/rtems-sparc

This command should output something like this (omitted lines are denoted by …). The build host appears as part of the name of the package being built. The name you see may vary depending on the host you are using:

RTEMS Source Builder - Set Builder, 6 (5e449fb5c2cb)
Build Set: 6/rtems-sparc
...
config: tools/rtems-binutils-2.36.cfg
package: sparc-rtems6-binutils-fbb9a7e-x86_64-linux-gnu-1
building: sparc-rtems6-binutils-fbb9a7e-x86_64-linux-gnu-1
sizes: sparc-rtems6-binutils-fbb9a7e-x86_64-linux-gnu-1: 716.015MB (installed: 163.538MB)
cleaning: sparc-rtems6-binutils-fbb9a7e-x86_64-linux-gnu-1
reporting: tools/rtems-binutils-2.36.cfg -> sparc-rtems6-binutils-fbb9a7e-x86_64-linux-gnu-1.txt
reporting: tools/rtems-binutils-2.36.cfg -> sparc-rtems6-binutils-fbb9a7e-x86_64-linux-gnu-1.xml
config: tools/rtems-gcc-10-newlib-head.cfg
package: sparc-rtems6-gcc-6051af8-newlib-d10d0d9-x86_64-linux-gnu-1
building: sparc-rtems6-gcc-6051af8-newlib-d10d0d9-x86_64-linux-gnu-1
....
Build Sizes: usage: 9.607GB total: 2.244GB (sources: 264.186MB, patches: 43.468KB, installed 1.986GB)
installing: 6/rtems-sparc -> $HOME/quick-start/rtems/6
clean staging: 6/rtems-sparc
Staging Size: 5.292MB
Build Set: Time 1:01:48.019157

Once the build has successfully completed you can check if the cross C compiler works with the following command:

$HOME/quick-start/rtems/6/bin/sparc-rtems6-gcc --version

This command should output something like below. The version informtion helps you to identify the exact sources used to build the cross compiler of your RTEMS tool suite. In the output you see the version of RTEMS or the hash from the RSB repository if you are building using a Git repository clone. The Newlib hash is the version of Newlib in the RTEMS’s github sourceware-mirror-newlib-cygwin repository. The sources and patches directories created by the RSB contain all the source code used.

sparc-rtems6-gcc (GCC) 10.2.1 20210309 (RTEMS 6, RSB 5e449fb5c2cb6812a238f9f9764fd339cbbf05c2, Newlib d10d0d9)
Copyright (C) 2020 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Add --verbose to the GCC command for the verbose version details.

2.4.1. Creating a Tool Archive#

2.4.2. Need for RTEMS-Specific Cross-Compiler#

New users are often confused as to why they cannot use their distribution’s cross-compiler for their target on RTEMS, e.g., the riscv64-linux-gnu or the arm-none-eabi-gcc. Below mentioned are some of the reasons for using the RTEMS cross-compiler.

Correct configuration of Newlib

Newlib is a C standard library implementation intended for use on embedded systems. Most of the POSIX and libc support for RTEMS is derived from Newlib. The RTEMS cross-compiler configures Newlib correctly for RTEMS.

Threading in GCC support libraries

Several threading packages in GCC such as Go threads (libgo), OpenMP (libgomp), and OpenACC need to be customized according to RTEMS. This is done by the RTEMS specific cross-compiler.

Provide preprocessor define __rtems__

The __rtems__ preprocessor define is used to provide conditional code compilation in source files that are shared with other projects e.g. in Newlib or imported code from FreeBSD.

Multilib variants to match the BSP

RTEMS configures GCC to create separate runtime libraries for each supported instruction set, floating point unit, vector unit, word size (e.g. 32-bit and 64-bit), endianness, ABI, processor errata workarounds, and so on in the architecture. These libraries are termed as Multilib variants. Multilib variants to match the BSP are set by selecting a specific set of machine options using the RTEMS cross-compiler.

2.4.3. Project Sandboxing#

Project specific sandboxes let you have a number of projects running in parallel with each project in its own sandbox. You simply have a prefix per project and under that prefix you create a simple yet repeatable structure.

As an example lets say I have a large disk mounted under /bd for Big Disk. As root create a directory called projects and give the directory suitable permissions to be writable by you as a user.

Lets create a project sandbox for my Box Sorter project. First create a project directory called /bd/projects/box-sorter. Under this create rtems and under that create rtems-6.1-rc5. Under this path you can follow the released-version procedure to build a tool set using the prefix of /bd/projects/box-sorter/rtems/6.1-rc5. You are free to create your project specific directories under /bd/projects/box-sorter. The top level directories would be:

/bd/projects

Project specific development trees.

/bd/projects/box-sorter

Box Sorter project sandbox.

/bd/projects/box-sorter/rtems/6.1-rc5

Project prefix for RTEMS 6.1-rc5 compiler, debuggers, tools and installed Board Support Package (BSP).

A variation is to use the --without-rtems option with the RSB to not build the BSPs when building the tools and to build RTEMS specifically for each project. This lets you have a production tools installed at a top level on your disk and each project can have a specific and possibly customised version of RTEMS. The top level directories would be:

/bd/rtems

The top path to production tools.

/bd/rtems/6.1-rc5

Production prefix for RTEMS 6.1-rc5 compiler, debuggers and tools.

/bd/projects

Project specific development trees.

/bd/projects/box-sorter

Box Sorter project sandbox.

/bd/projects/box-sorter/rtems

Box Sorter project’s custom RTEMS kernel source and installed BSP.

A further varation if there is an RTEMS kernel you want to share between projects is it to move this to a top level and share. In this case you will end up with:

/bd/rtems

The top path to production tools and kernels.

/bd/rtems/6.1-rc5

Production prefix for RTEMS 6.1-rc5.

/bd/rtems/6.1-rc5/tools

Production prefix for RTEMS 6.1-rc5 compiler, debuggers and tools.

/bd/rtems/6.1-rc5/bsps

Production prefix for RTEMS 6.1-rc5 Board Support Packages (BSPs).

/bd/projects

Project specific development trees.

/bd/projects/box-sorter

Box Sorter project sandbox.

Finally you can have a single set of production tools and RTEMS BSPs on the disk under /bd/rtems you can share between your projects. The top level directories would be:

/bd/rtems

The top path to production tools and kernels.

/bd/rtems/6.1-rc5

Production prefix for RTEMS 6.1-rc5 compiler, debuggers, tools and Board Support Packages (BSPs).

/bd/projects

Project specific development trees.

/bd/projects/box-sorter

Box Sorter project sandbox.

The project sandoxing approach allows you move a specific production part into the project’s sandbox to allow you to customise it. This is useful if you are testing new releases. The typical dependency is the order listed above. You can test new RTEMS kernels with production tools but new tools will require you build the kernel with them. Release notes with each release will let know what you need to update.

If the machine is a central project development machine simply replace projects with users and give each user a personal directory.