RTEMS 6.1-rc5
|
Header file of UART HAL module. More...
Go to the source code of this file.
Data Structures | |
struct | UART_InitTypeDef |
UART Init Structure definition. More... | |
struct | UART_AdvFeatureInitTypeDef |
UART Advanced Features initialization structure definition. More... | |
struct | __UART_HandleTypeDef |
UART handle Structure definition. More... | |
Macros | |
#define | HAL_UART_STATE_RESET 0x00000000U |
#define | HAL_UART_STATE_READY 0x00000020U |
#define | HAL_UART_STATE_BUSY 0x00000024U |
#define | HAL_UART_STATE_BUSY_TX 0x00000021U |
#define | HAL_UART_STATE_BUSY_RX 0x00000022U |
#define | HAL_UART_STATE_BUSY_TX_RX 0x00000023U |
#define | HAL_UART_STATE_TIMEOUT 0x000000A0U |
#define | HAL_UART_STATE_ERROR 0x000000E0U |
#define | HAL_UART_ERROR_NONE (0x00000000U) |
#define | HAL_UART_ERROR_PE (0x00000001U) |
#define | HAL_UART_ERROR_NE (0x00000002U) |
#define | HAL_UART_ERROR_FE (0x00000004U) |
#define | HAL_UART_ERROR_ORE (0x00000008U) |
#define | HAL_UART_ERROR_DMA (0x00000010U) |
#define | HAL_UART_ERROR_RTO (0x00000020U) |
#define | UART_STOPBITS_0_5 USART_CR2_STOP_0 |
#define | UART_STOPBITS_1 0x00000000U |
#define | UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) |
#define | UART_STOPBITS_2 USART_CR2_STOP_1 |
#define | UART_PARITY_NONE 0x00000000U |
#define | UART_PARITY_EVEN USART_CR1_PCE |
#define | UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) |
#define | UART_HWCONTROL_NONE 0x00000000U |
#define | UART_HWCONTROL_RTS USART_CR3_RTSE |
#define | UART_HWCONTROL_CTS USART_CR3_CTSE |
#define | UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) |
#define | UART_MODE_RX USART_CR1_RE |
#define | UART_MODE_TX USART_CR1_TE |
#define | UART_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) |
#define | UART_STATE_DISABLE 0x00000000U |
#define | UART_STATE_ENABLE USART_CR1_UE |
#define | UART_OVERSAMPLING_16 0x00000000U |
#define | UART_OVERSAMPLING_8 USART_CR1_OVER8 |
#define | UART_ONE_BIT_SAMPLE_DISABLE 0x00000000U |
#define | UART_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT |
#define | UART_PRESCALER_DIV1 0x00000000U |
#define | UART_PRESCALER_DIV2 0x00000001U |
#define | UART_PRESCALER_DIV4 0x00000002U |
#define | UART_PRESCALER_DIV6 0x00000003U |
#define | UART_PRESCALER_DIV8 0x00000004U |
#define | UART_PRESCALER_DIV10 0x00000005U |
#define | UART_PRESCALER_DIV12 0x00000006U |
#define | UART_PRESCALER_DIV16 0x00000007U |
#define | UART_PRESCALER_DIV32 0x00000008U |
#define | UART_PRESCALER_DIV64 0x00000009U |
#define | UART_PRESCALER_DIV128 0x0000000AU |
#define | UART_PRESCALER_DIV256 0x0000000BU |
#define | UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT 0x00000000U |
#define | UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE USART_CR2_ABRMODE_0 |
#define | UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME USART_CR2_ABRMODE_1 |
#define | UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME USART_CR2_ABRMODE |
#define | UART_RECEIVER_TIMEOUT_DISABLE 0x00000000U |
#define | UART_RECEIVER_TIMEOUT_ENABLE USART_CR2_RTOEN |
#define | UART_LIN_DISABLE 0x00000000U |
#define | UART_LIN_ENABLE USART_CR2_LINEN |
#define | UART_LINBREAKDETECTLENGTH_10B 0x00000000U |
#define | UART_LINBREAKDETECTLENGTH_11B USART_CR2_LBDL |
#define | UART_DMA_TX_DISABLE 0x00000000U |
#define | UART_DMA_TX_ENABLE USART_CR3_DMAT |
#define | UART_DMA_RX_DISABLE 0x00000000U |
#define | UART_DMA_RX_ENABLE USART_CR3_DMAR |
#define | UART_HALF_DUPLEX_DISABLE 0x00000000U |
#define | UART_HALF_DUPLEX_ENABLE USART_CR3_HDSEL |
#define | UART_WAKEUPMETHOD_IDLELINE 0x00000000U |
#define | UART_WAKEUPMETHOD_ADDRESSMARK USART_CR1_WAKE |
#define | UART_AUTOBAUD_REQUEST USART_RQR_ABRRQ |
#define | UART_SENDBREAK_REQUEST USART_RQR_SBKRQ |
#define | UART_MUTE_MODE_REQUEST USART_RQR_MMRQ |
#define | UART_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ |
#define | UART_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ |
#define | UART_ADVFEATURE_NO_INIT 0x00000000U |
#define | UART_ADVFEATURE_TXINVERT_INIT 0x00000001U |
#define | UART_ADVFEATURE_RXINVERT_INIT 0x00000002U |
#define | UART_ADVFEATURE_DATAINVERT_INIT 0x00000004U |
#define | UART_ADVFEATURE_SWAP_INIT 0x00000008U |
#define | UART_ADVFEATURE_RXOVERRUNDISABLE_INIT 0x00000010U |
#define | UART_ADVFEATURE_DMADISABLEONERROR_INIT 0x00000020U |
#define | UART_ADVFEATURE_AUTOBAUDRATE_INIT 0x00000040U |
#define | UART_ADVFEATURE_MSBFIRST_INIT 0x00000080U |
#define | UART_ADVFEATURE_TXINV_DISABLE 0x00000000U |
#define | UART_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV |
#define | UART_ADVFEATURE_RXINV_DISABLE 0x00000000U |
#define | UART_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV |
#define | UART_ADVFEATURE_DATAINV_DISABLE 0x00000000U |
#define | UART_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV |
#define | UART_ADVFEATURE_SWAP_DISABLE 0x00000000U |
#define | UART_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP |
#define | UART_ADVFEATURE_OVERRUN_ENABLE 0x00000000U |
#define | UART_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS |
#define | UART_ADVFEATURE_AUTOBAUDRATE_DISABLE 0x00000000U |
#define | UART_ADVFEATURE_AUTOBAUDRATE_ENABLE USART_CR2_ABREN |
#define | UART_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U |
#define | UART_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE |
#define | UART_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U |
#define | UART_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST |
#define | UART_ADVFEATURE_STOPMODE_DISABLE 0x00000000U |
#define | UART_ADVFEATURE_STOPMODE_ENABLE USART_CR1_UESM |
#define | UART_ADVFEATURE_MUTEMODE_DISABLE 0x00000000U |
#define | UART_ADVFEATURE_MUTEMODE_ENABLE USART_CR1_MME |
#define | UART_CR2_ADDRESS_LSB_POS 24U |
#define | UART_WAKEUP_ON_ADDRESS 0x00000000U |
#define | UART_WAKEUP_ON_STARTBIT USART_CR3_WUS_1 |
#define | UART_WAKEUP_ON_READDATA_NONEMPTY USART_CR3_WUS |
#define | UART_DE_POLARITY_HIGH 0x00000000U |
#define | UART_DE_POLARITY_LOW USART_CR3_DEP |
#define | UART_CR1_DEAT_ADDRESS_LSB_POS 21U |
#define | UART_CR1_DEDT_ADDRESS_LSB_POS 16U |
#define | UART_IT_MASK 0x001FU |
#define | HAL_UART_TIMEOUT_VALUE 0x1FFFFFFU |
#define | UART_FLAG_TXFT USART_ISR_TXFT |
#define | UART_FLAG_RXFT USART_ISR_RXFT |
#define | UART_FLAG_RXFF USART_ISR_RXFF |
#define | UART_FLAG_TXFE USART_ISR_TXFE |
#define | UART_FLAG_REACK USART_ISR_REACK |
#define | UART_FLAG_TEACK USART_ISR_TEACK |
#define | UART_FLAG_WUF USART_ISR_WUF |
#define | UART_FLAG_RWU USART_ISR_RWU |
#define | UART_FLAG_SBKF USART_ISR_SBKF |
#define | UART_FLAG_CMF USART_ISR_CMF |
#define | UART_FLAG_BUSY USART_ISR_BUSY |
#define | UART_FLAG_ABRF USART_ISR_ABRF |
#define | UART_FLAG_ABRE USART_ISR_ABRE |
#define | UART_FLAG_RTOF USART_ISR_RTOF |
#define | UART_FLAG_CTS USART_ISR_CTS |
#define | UART_FLAG_CTSIF USART_ISR_CTSIF |
#define | UART_FLAG_LBDF USART_ISR_LBDF |
#define | UART_FLAG_TXE USART_ISR_TXE_TXFNF |
#define | UART_FLAG_TXFNF USART_ISR_TXE_TXFNF |
#define | UART_FLAG_TC USART_ISR_TC |
#define | UART_FLAG_RXNE USART_ISR_RXNE_RXFNE |
#define | UART_FLAG_RXFNE USART_ISR_RXNE_RXFNE |
#define | UART_FLAG_IDLE USART_ISR_IDLE |
#define | UART_FLAG_ORE USART_ISR_ORE |
#define | UART_FLAG_NE USART_ISR_NE |
#define | UART_FLAG_FE USART_ISR_FE |
#define | UART_FLAG_PE USART_ISR_PE |
#define | UART_IT_PE 0x0028U |
#define | UART_IT_TXE 0x0727U |
#define | UART_IT_TXFNF 0x0727U |
#define | UART_IT_TC 0x0626U |
#define | UART_IT_RXNE 0x0525U |
#define | UART_IT_RXFNE 0x0525U |
#define | UART_IT_IDLE 0x0424U |
#define | UART_IT_LBD 0x0846U |
#define | UART_IT_CTS 0x096AU |
#define | UART_IT_CM 0x112EU |
#define | UART_IT_WUF 0x1476U |
#define | UART_IT_RXFF 0x183FU |
#define | UART_IT_TXFE 0x173EU |
#define | UART_IT_RXFT 0x1A7CU |
#define | UART_IT_TXFT 0x1B77U |
#define | UART_IT_RTO 0x0B3AU |
#define | UART_IT_ERR 0x0060U |
#define | UART_IT_ORE 0x0300U |
#define | UART_IT_NE 0x0200U |
#define | UART_IT_FE 0x0100U |
#define | UART_CLEAR_PEF USART_ICR_PECF |
#define | UART_CLEAR_FEF USART_ICR_FECF |
#define | UART_CLEAR_NEF USART_ICR_NECF |
#define | UART_CLEAR_OREF USART_ICR_ORECF |
#define | UART_CLEAR_IDLEF USART_ICR_IDLECF |
#define | UART_CLEAR_TXFECF USART_ICR_TXFECF |
#define | UART_CLEAR_TCF USART_ICR_TCCF |
#define | UART_CLEAR_LBDF USART_ICR_LBDCF |
#define | UART_CLEAR_CTSF USART_ICR_CTSCF |
#define | UART_CLEAR_CMF USART_ICR_CMCF |
#define | UART_CLEAR_WUF USART_ICR_WUCF |
#define | UART_CLEAR_RTOF USART_ICR_RTOCF |
#define | HAL_UART_RECEPTION_STANDARD (0x00000000U) |
#define | HAL_UART_RECEPTION_TOIDLE (0x00000001U) |
#define | HAL_UART_RECEPTION_TORTO (0x00000002U) |
#define | HAL_UART_RECEPTION_TOCHARMATCH (0x00000003U) |
#define | HAL_UART_RXEVENT_TC (0x00000000U) |
#define | HAL_UART_RXEVENT_HT (0x00000001U) |
#define | HAL_UART_RXEVENT_IDLE (0x00000002U) |
#define | __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) |
Reset UART handle states. | |
#define | __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) |
Flush the UART Data registers. | |
#define | __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) |
Clear the specified UART pending flag. | |
#define | __HAL_UART_CLEAR_PEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_PEF) |
Clear the UART PE pending flag. | |
#define | __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_FEF) |
Clear the UART FE pending flag. | |
#define | __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_NEF) |
Clear the UART NE pending flag. | |
#define | __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_OREF) |
Clear the UART ORE pending flag. | |
#define | __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_IDLEF) |
Clear the UART IDLE pending flag. | |
#define | __HAL_UART_CLEAR_TXFECF(__HANDLE__) __HAL_UART_CLEAR_FLAG((__HANDLE__), UART_CLEAR_TXFECF) |
Clear the UART TX FIFO empty clear flag. | |
#define | __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) |
Check whether the specified UART flag is set or not. | |
#define | __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) |
Enable the specified UART interrupt. | |
#define | __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) |
Disable the specified UART interrupt. | |
#define | __HAL_UART_GET_IT(__HANDLE__, __INTERRUPT__) |
Check whether the specified UART interrupt has occurred or not. | |
#define | __HAL_UART_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) |
Check whether the specified UART interrupt source is enabled or not. | |
#define | __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) |
Clear the specified UART ISR flag, in setting the proper ICR register flag. | |
#define | __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) |
Set a specific UART request flag. | |
#define | __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
Enable the UART one bit sample method. | |
#define | __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= ~USART_CR3_ONEBIT) |
Disable the UART one bit sample method. | |
#define | __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
Enable UART. | |
#define | __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
Disable UART. | |
#define | __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) |
Enable CTS flow control. | |
#define | __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) |
Disable CTS flow control. | |
#define | __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) |
Enable RTS flow control. | |
#define | __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) |
Disable RTS flow control. | |
#define | UART_GET_DIV_FACTOR(__CLOCKPRESCALER__) |
Get UART clok division factor from clock prescaler value. | |
#define | UART_DIV_LPUART(__PCLK__, __BAUD__, __CLOCKPRESCALER__) |
BRR division operation to set BRR register with LPUART. | |
#define | UART_DIV_SAMPLING8(__PCLK__, __BAUD__, __CLOCKPRESCALER__) (((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)])*2U) + ((__BAUD__)/2U)) / (__BAUD__)) |
BRR division operation to set BRR register in 8-bit oversampling mode. | |
#define | UART_DIV_SAMPLING16(__PCLK__, __BAUD__, __CLOCKPRESCALER__) ((((__PCLK__)/UARTPrescTable[(__CLOCKPRESCALER__)]) + ((__BAUD__)/2U)) / (__BAUD__)) |
BRR division operation to set BRR register in 16-bit oversampling mode. | |
#define | UART_INSTANCE_LOWPOWER(__HANDLE__) (IS_LPUART_INSTANCE((__HANDLE__)->Instance)) |
Check whether or not UART instance is Low Power UART. | |
#define | IS_UART_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 12500001U) |
Check UART Baud rate. | |
#define | IS_UART_ASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) |
Check UART assertion time. | |
#define | IS_UART_DEASSERTIONTIME(__TIME__) ((__TIME__) <= 0x1FU) |
Check UART deassertion time. | |
#define | IS_UART_STOPBITS(__STOPBITS__) |
Ensure that UART frame number of stop bits is valid. | |
#define | IS_LPUART_STOPBITS(__STOPBITS__) |
Ensure that LPUART frame number of stop bits is valid. | |
#define | IS_UART_PARITY(__PARITY__) |
Ensure that UART frame parity is valid. | |
#define | IS_UART_HARDWARE_FLOW_CONTROL(__CONTROL__) |
Ensure that UART hardware flow control is valid. | |
#define | IS_UART_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(UART_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) |
Ensure that UART communication mode is valid. | |
#define | IS_UART_STATE(__STATE__) |
Ensure that UART state is valid. | |
#define | IS_UART_OVERSAMPLING(__SAMPLING__) |
Ensure that UART oversampling is valid. | |
#define | IS_UART_ONE_BIT_SAMPLE(__ONEBIT__) |
Ensure that UART frame sampling is valid. | |
#define | IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) |
Ensure that UART auto Baud rate detection mode is valid. | |
#define | IS_UART_RECEIVER_TIMEOUT(__TIMEOUT__) |
Ensure that UART receiver timeout setting is valid. | |
#define | IS_UART_RECEIVER_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) |
Check the receiver timeout value. | |
#define | IS_UART_LIN(__LIN__) |
Ensure that UART LIN state is valid. | |
#define | IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) |
Ensure that UART LIN break detection length is valid. | |
#define | IS_UART_DMA_TX(__DMATX__) |
Ensure that UART DMA TX state is valid. | |
#define | IS_UART_DMA_RX(__DMARX__) |
Ensure that UART DMA RX state is valid. | |
#define | IS_UART_HALF_DUPLEX(__HDSEL__) |
Ensure that UART half-duplex state is valid. | |
#define | IS_UART_WAKEUPMETHOD(__WAKEUP__) |
Ensure that UART wake-up method is valid. | |
#define | IS_UART_REQUEST_PARAMETER(__PARAM__) |
Ensure that UART request parameter is valid. | |
#define | IS_UART_ADVFEATURE_INIT(__INIT__) |
Ensure that UART advanced features initialization is valid. | |
#define | IS_UART_ADVFEATURE_TXINV(__TXINV__) |
Ensure that UART frame TX inversion setting is valid. | |
#define | IS_UART_ADVFEATURE_RXINV(__RXINV__) |
Ensure that UART frame RX inversion setting is valid. | |
#define | IS_UART_ADVFEATURE_DATAINV(__DATAINV__) |
Ensure that UART frame data inversion setting is valid. | |
#define | IS_UART_ADVFEATURE_SWAP(__SWAP__) |
Ensure that UART frame RX/TX pins swap setting is valid. | |
#define | IS_UART_OVERRUN(__OVERRUN__) |
Ensure that UART frame overrun setting is valid. | |
#define | IS_UART_ADVFEATURE_AUTOBAUDRATE(__AUTOBAUDRATE__) |
Ensure that UART auto Baud rate state is valid. | |
#define | IS_UART_ADVFEATURE_DMAONRXERROR(__DMA__) |
Ensure that UART DMA enabling or disabling on error setting is valid. | |
#define | IS_UART_ADVFEATURE_MSBFIRST(__MSBFIRST__) |
Ensure that UART frame MSB first setting is valid. | |
#define | IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) |
Ensure that UART stop mode state is valid. | |
#define | IS_UART_MUTE_MODE(__MUTE__) |
Ensure that UART mute mode state is valid. | |
#define | IS_UART_WAKEUP_SELECTION(__WAKE__) |
Ensure that UART wake-up selection is valid. | |
#define | IS_UART_DE_POLARITY(__POLARITY__) |
Ensure that UART driver enable polarity is valid. | |
#define | IS_UART_PRESCALER(__CLOCKPRESCALER__) |
Ensure that UART Prescaler is valid. | |
Typedefs | |
typedef uint32_t | HAL_UART_StateTypeDef |
HAL UART State definition. | |
typedef uint32_t | HAL_UART_RxTypeTypeDef |
HAL UART Reception type definition. | |
typedef uint32_t | HAL_UART_RxEventTypeTypeDef |
HAL UART Rx Event type definition. | |
typedef struct __UART_HandleTypeDef | UART_HandleTypeDef |
UART handle Structure definition. | |
Enumerations | |
enum | UART_ClockSourceTypeDef { UART_CLOCKSOURCE_D2PCLK1 = 0x00U , UART_CLOCKSOURCE_D2PCLK2 = 0x01U , UART_CLOCKSOURCE_D3PCLK1 = 0x02U , UART_CLOCKSOURCE_PLL2 = 0x04U , UART_CLOCKSOURCE_PLL3 = 0x08U , UART_CLOCKSOURCE_HSI = 0x10U , UART_CLOCKSOURCE_CSI = 0x20U , UART_CLOCKSOURCE_LSE = 0x40U , UART_CLOCKSOURCE_UNDEFINED = 0x80U } |
UART clock sources definition. More... | |
Functions | |
HAL_StatusTypeDef | HAL_UART_Init (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_HalfDuplex_Init (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_LIN_Init (UART_HandleTypeDef *huart, uint32_t BreakDetectLength) |
HAL_StatusTypeDef | HAL_MultiProcessor_Init (UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod) |
HAL_StatusTypeDef | HAL_UART_DeInit (UART_HandleTypeDef *huart) |
void | HAL_UART_MspInit (UART_HandleTypeDef *huart) |
void | HAL_UART_MspDeInit (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_Transmit (UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size, uint32_t Timeout) |
HAL_StatusTypeDef | HAL_UART_Receive (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout) |
HAL_StatusTypeDef | HAL_UART_Transmit_IT (UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_UART_Receive_IT (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_UART_Transmit_DMA (UART_HandleTypeDef *huart, const uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_UART_Receive_DMA (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_UART_DMAPause (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_DMAResume (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_DMAStop (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_Abort (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_AbortTransmit (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_AbortReceive (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_Abort_IT (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_AbortTransmit_IT (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_AbortReceive_IT (UART_HandleTypeDef *huart) |
void | HAL_UART_IRQHandler (UART_HandleTypeDef *huart) |
void | HAL_UART_TxHalfCpltCallback (UART_HandleTypeDef *huart) |
void | HAL_UART_TxCpltCallback (UART_HandleTypeDef *huart) |
void | HAL_UART_RxHalfCpltCallback (UART_HandleTypeDef *huart) |
void | HAL_UART_RxCpltCallback (UART_HandleTypeDef *huart) |
void | HAL_UART_ErrorCallback (UART_HandleTypeDef *huart) |
void | HAL_UART_AbortCpltCallback (UART_HandleTypeDef *huart) |
void | HAL_UART_AbortTransmitCpltCallback (UART_HandleTypeDef *huart) |
void | HAL_UART_AbortReceiveCpltCallback (UART_HandleTypeDef *huart) |
void | HAL_UARTEx_RxEventCallback (UART_HandleTypeDef *huart, uint16_t Size) |
void | HAL_UART_ReceiverTimeout_Config (UART_HandleTypeDef *huart, uint32_t TimeoutValue) |
HAL_StatusTypeDef | HAL_UART_EnableReceiverTimeout (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_UART_DisableReceiverTimeout (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_LIN_SendBreak (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_MultiProcessor_EnableMuteMode (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_MultiProcessor_DisableMuteMode (UART_HandleTypeDef *huart) |
void | HAL_MultiProcessor_EnterMuteMode (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_HalfDuplex_EnableTransmitter (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | HAL_HalfDuplex_EnableReceiver (UART_HandleTypeDef *huart) |
HAL_UART_StateTypeDef | HAL_UART_GetState (const UART_HandleTypeDef *huart) |
uint32_t | HAL_UART_GetError (const UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | UART_SetConfig (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | UART_CheckIdleState (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | UART_WaitOnFlagUntilTimeout (UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Tickstart, uint32_t Timeout) |
void | UART_AdvFeatureConfig (UART_HandleTypeDef *huart) |
HAL_StatusTypeDef | UART_Start_Receive_IT (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | UART_Start_Receive_DMA (UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size) |
Variables | |
const uint16_t | UARTPrescTable [12] |
Header file of UART HAL module.
Copyright (c) 2017 STMicroelectronics. All rights reserved.
This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.