RTEMS 6.1-rc5
|
Header file of SMARTCARD HAL module. More...
Go to the source code of this file.
Data Structures | |
struct | SMARTCARD_InitTypeDef |
SMARTCARD Init Structure definition. More... | |
struct | SMARTCARD_AdvFeatureInitTypeDef |
SMARTCARD advanced features initialization structure definition. More... | |
struct | __SMARTCARD_HandleTypeDef |
SMARTCARD handle Structure definition. More... | |
Macros | |
#define | HAL_SMARTCARD_STATE_RESET 0x00000000U |
#define | HAL_SMARTCARD_STATE_READY 0x00000020U |
#define | HAL_SMARTCARD_STATE_BUSY 0x00000024U |
#define | HAL_SMARTCARD_STATE_BUSY_TX 0x00000021U |
#define | HAL_SMARTCARD_STATE_BUSY_RX 0x00000022U |
#define | HAL_SMARTCARD_STATE_BUSY_TX_RX 0x00000023U |
#define | HAL_SMARTCARD_STATE_TIMEOUT 0x000000A0U |
#define | HAL_SMARTCARD_STATE_ERROR 0x000000E0U |
#define | HAL_SMARTCARD_ERROR_NONE (0x00000000U) |
#define | HAL_SMARTCARD_ERROR_PE (0x00000001U) |
#define | HAL_SMARTCARD_ERROR_NE (0x00000002U) |
#define | HAL_SMARTCARD_ERROR_FE (0x00000004U) |
#define | HAL_SMARTCARD_ERROR_ORE (0x00000008U) |
#define | HAL_SMARTCARD_ERROR_DMA (0x00000010U) |
#define | HAL_SMARTCARD_ERROR_RTO (0x00000020U) |
#define | SMARTCARD_WORDLENGTH_9B USART_CR1_M0 |
#define | SMARTCARD_STOPBITS_0_5 USART_CR2_STOP_0 |
#define | SMARTCARD_STOPBITS_1_5 USART_CR2_STOP |
#define | SMARTCARD_PARITY_EVEN USART_CR1_PCE |
#define | SMARTCARD_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) |
#define | SMARTCARD_MODE_RX USART_CR1_RE |
#define | SMARTCARD_MODE_TX USART_CR1_TE |
#define | SMARTCARD_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) |
#define | SMARTCARD_POLARITY_LOW 0x00000000U |
#define | SMARTCARD_POLARITY_HIGH USART_CR2_CPOL |
#define | SMARTCARD_PHASE_1EDGE 0x00000000U |
#define | SMARTCARD_PHASE_2EDGE USART_CR2_CPHA |
#define | SMARTCARD_LASTBIT_DISABLE 0x00000000U |
#define | SMARTCARD_LASTBIT_ENABLE USART_CR2_LBCL |
#define | SMARTCARD_ONE_BIT_SAMPLE_DISABLE 0x00000000U |
#define | SMARTCARD_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT |
#define | SMARTCARD_NACK_DISABLE 0x00000000U |
#define | SMARTCARD_NACK_ENABLE USART_CR3_NACK |
#define | SMARTCARD_TIMEOUT_DISABLE 0x00000000U |
#define | SMARTCARD_TIMEOUT_ENABLE USART_CR2_RTOEN |
#define | SMARTCARD_PRESCALER_DIV1 0x00000000U |
#define | SMARTCARD_PRESCALER_DIV2 0x00000001U |
#define | SMARTCARD_PRESCALER_DIV4 0x00000002U |
#define | SMARTCARD_PRESCALER_DIV6 0x00000003U |
#define | SMARTCARD_PRESCALER_DIV8 0x00000004U |
#define | SMARTCARD_PRESCALER_DIV10 0x00000005U |
#define | SMARTCARD_PRESCALER_DIV12 0x00000006U |
#define | SMARTCARD_PRESCALER_DIV16 0x00000007U |
#define | SMARTCARD_PRESCALER_DIV32 0x00000008U |
#define | SMARTCARD_PRESCALER_DIV64 0x00000009U |
#define | SMARTCARD_PRESCALER_DIV128 0x0000000AU |
#define | SMARTCARD_PRESCALER_DIV256 0x0000000BU |
#define | SMARTCARD_ADVFEATURE_TXINV_DISABLE 0x00000000U |
#define | SMARTCARD_ADVFEATURE_TXINV_ENABLE USART_CR2_TXINV |
#define | SMARTCARD_ADVFEATURE_RXINV_DISABLE 0x00000000U |
#define | SMARTCARD_ADVFEATURE_RXINV_ENABLE USART_CR2_RXINV |
#define | SMARTCARD_ADVFEATURE_DATAINV_DISABLE 0x00000000U |
#define | SMARTCARD_ADVFEATURE_DATAINV_ENABLE USART_CR2_DATAINV |
#define | SMARTCARD_ADVFEATURE_SWAP_DISABLE 0x00000000U |
#define | SMARTCARD_ADVFEATURE_SWAP_ENABLE USART_CR2_SWAP |
#define | SMARTCARD_ADVFEATURE_OVERRUN_ENABLE 0x00000000U |
#define | SMARTCARD_ADVFEATURE_OVERRUN_DISABLE USART_CR3_OVRDIS |
#define | SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR 0x00000000U |
#define | SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR USART_CR3_DDRE |
#define | SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE 0x00000000U |
#define | SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE USART_CR2_MSBFIRST |
#define | SMARTCARD_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ |
#define | SMARTCARD_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ |
#define | SMARTCARD_IT_MASK 0x001FU |
#define | SMARTCARD_CR_MASK 0x00E0U |
#define | SMARTCARD_CR_POS 5U |
#define | SMARTCARD_ISR_MASK 0x1F00U |
#define | SMARTCARD_ISR_POS 8U |
#define | __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) |
Reset SMARTCARD handle states. | |
#define | __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) |
Flush the Smartcard Data registers. | |
#define | __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) |
Clear the specified SMARTCARD pending flag. | |
#define | __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF) |
Clear the SMARTCARD PE pending flag. | |
#define | __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF) |
Clear the SMARTCARD FE pending flag. | |
#define | __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF) |
Clear the SMARTCARD NE pending flag. | |
#define | __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF) |
Clear the SMARTCARD ORE pending flag. | |
#define | __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF) |
Clear the SMARTCARD IDLE pending flag. | |
#define | __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) |
Check whether the specified Smartcard flag is set or not. | |
#define | __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) |
Enable the specified SmartCard interrupt. | |
#define | __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) |
Disable the specified SmartCard interrupt. | |
#define | __HAL_SMARTCARD_GET_IT(__HANDLE__, __INTERRUPT__) |
Check whether the specified SmartCard interrupt has occurred or not. | |
#define | __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) |
Check whether the specified SmartCard interrupt source is enabled or not. | |
#define | __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__)) |
Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag. | |
#define | __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) |
Set a specific SMARTCARD request flag. | |
#define | __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
Enable the SMARTCARD one bit sample method. | |
#define | __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) |
Disable the SMARTCARD one bit sample method. | |
#define | __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
Enable the USART associated to the SMARTCARD Handle. | |
#define | __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
Disable the USART associated to the SMARTCARD Handle. | |
#define | SMARTCARD_GETCLOCKSOURCE(__HANDLE__, __CLOCKSOURCE__) |
Report the SMARTCARD clock source. | |
#define | IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 6250001U) |
Check the Baud rate range. | |
#define | IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU) |
Check the block length range. | |
#define | IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) |
Check the receiver timeout value. | |
#define | IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U) |
Check the SMARTCARD autoretry counter value. | |
#define | IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) |
Ensure that SMARTCARD frame length is valid. | |
#define | IS_SMARTCARD_STOPBITS(__STOPBITS__) |
Ensure that SMARTCARD frame number of stop bits is valid. | |
#define | IS_SMARTCARD_PARITY(__PARITY__) |
Ensure that SMARTCARD frame parity is valid. | |
#define | IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & 0xFFF3U) == 0x00U) && ((__MODE__) != 0x00U)) |
Ensure that SMARTCARD communication mode is valid. | |
#define | IS_SMARTCARD_POLARITY(__CPOL__) |
Ensure that SMARTCARD frame polarity is valid. | |
#define | IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) |
Ensure that SMARTCARD frame phase is valid. | |
#define | IS_SMARTCARD_LASTBIT(__LASTBIT__) |
Ensure that SMARTCARD frame last bit clock pulse setting is valid. | |
#define | IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) |
Ensure that SMARTCARD frame sampling is valid. | |
#define | IS_SMARTCARD_NACK(__NACK__) |
Ensure that SMARTCARD NACK transmission setting is valid. | |
#define | IS_SMARTCARD_TIMEOUT(__TIMEOUT__) |
Ensure that SMARTCARD receiver timeout setting is valid. | |
#define | IS_SMARTCARD_CLOCKPRESCALER(__CLOCKPRESCALER__) |
Ensure that SMARTCARD clock Prescaler is valid. | |
#define | IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) |
Ensure that SMARTCARD advanced features initialization is valid. | |
#define | IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) |
Ensure that SMARTCARD frame TX inversion setting is valid. | |
#define | IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) |
Ensure that SMARTCARD frame RX inversion setting is valid. | |
#define | IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) |
Ensure that SMARTCARD frame data inversion setting is valid. | |
#define | IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) |
Ensure that SMARTCARD frame RX/TX pins swap setting is valid. | |
#define | IS_SMARTCARD_OVERRUN(__OVERRUN__) |
Ensure that SMARTCARD frame overrun setting is valid. | |
#define | IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) |
Ensure that SMARTCARD DMA enabling or disabling on error setting is valid. | |
#define | IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) |
Ensure that SMARTCARD frame MSB first setting is valid. | |
#define | IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) |
Ensure that SMARTCARD request parameter is valid. | |
Typedefs | |
typedef uint32_t | HAL_SMARTCARD_StateTypeDef |
HAL SMARTCARD State definition. | |
typedef struct __SMARTCARD_HandleTypeDef | SMARTCARD_HandleTypeDef |
SMARTCARD handle Structure definition. | |
Enumerations | |
enum | SMARTCARD_ClockSourceTypeDef { SMARTCARD_CLOCKSOURCE_D2PCLK1 = 0x00U , SMARTCARD_CLOCKSOURCE_D2PCLK2 = 0x01U , SMARTCARD_CLOCKSOURCE_HSI = 0x04U , SMARTCARD_CLOCKSOURCE_CSI = 0x08U , SMARTCARD_CLOCKSOURCE_LSE = 0x20U , SMARTCARD_CLOCKSOURCE_PLL2Q = 0x40U , SMARTCARD_CLOCKSOURCE_PLL3Q = 0x80U , SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U } |
SMARTCARD clock sources. More... | |
Functions | |
HAL_StatusTypeDef | HAL_SMARTCARD_Init (SMARTCARD_HandleTypeDef *hsmartcard) |
HAL_StatusTypeDef | HAL_SMARTCARD_DeInit (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_MspInit (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_MspDeInit (SMARTCARD_HandleTypeDef *hsmartcard) |
HAL_StatusTypeDef | HAL_SMARTCARD_Transmit (SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size, uint32_t Timeout) |
HAL_StatusTypeDef | HAL_SMARTCARD_Receive (SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout) |
HAL_StatusTypeDef | HAL_SMARTCARD_Transmit_IT (SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_SMARTCARD_Receive_IT (SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_SMARTCARD_Transmit_DMA (SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_SMARTCARD_Receive_DMA (SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_SMARTCARD_Abort (SMARTCARD_HandleTypeDef *hsmartcard) |
HAL_StatusTypeDef | HAL_SMARTCARD_AbortTransmit (SMARTCARD_HandleTypeDef *hsmartcard) |
HAL_StatusTypeDef | HAL_SMARTCARD_AbortReceive (SMARTCARD_HandleTypeDef *hsmartcard) |
HAL_StatusTypeDef | HAL_SMARTCARD_Abort_IT (SMARTCARD_HandleTypeDef *hsmartcard) |
HAL_StatusTypeDef | HAL_SMARTCARD_AbortTransmit_IT (SMARTCARD_HandleTypeDef *hsmartcard) |
HAL_StatusTypeDef | HAL_SMARTCARD_AbortReceive_IT (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_IRQHandler (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_TxCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_RxCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_ErrorCallback (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_AbortCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_AbortTransmitCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard) |
void | HAL_SMARTCARD_AbortReceiveCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard) |
HAL_SMARTCARD_StateTypeDef | HAL_SMARTCARD_GetState (const SMARTCARD_HandleTypeDef *hsmartcard) |
uint32_t | HAL_SMARTCARD_GetError (const SMARTCARD_HandleTypeDef *hsmartcard) |
Header file of SMARTCARD HAL module.
Copyright (c) 2017 STMicroelectronics. All rights reserved.
This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.