RTEMS 6.1-rc5
|
Header file of IRDA HAL module. More...
Go to the source code of this file.
Data Structures | |
struct | IRDA_InitTypeDef |
IRDA Init Structure definition. More... | |
struct | IRDA_HandleTypeDef |
IRDA handle Structure definition. More... | |
Macros | |
#define | HAL_IRDA_STATE_RESET 0x00000000U |
#define | HAL_IRDA_STATE_READY 0x00000020U |
#define | HAL_IRDA_STATE_BUSY 0x00000024U |
#define | HAL_IRDA_STATE_BUSY_TX 0x00000021U |
#define | HAL_IRDA_STATE_BUSY_RX 0x00000022U |
#define | HAL_IRDA_STATE_BUSY_TX_RX 0x00000023U |
#define | HAL_IRDA_STATE_TIMEOUT 0x000000A0U |
#define | HAL_IRDA_STATE_ERROR 0x000000E0U |
#define | HAL_IRDA_ERROR_NONE (0x00000000U) |
#define | HAL_IRDA_ERROR_PE (0x00000001U) |
#define | HAL_IRDA_ERROR_NE (0x00000002U) |
#define | HAL_IRDA_ERROR_FE (0x00000004U) |
#define | HAL_IRDA_ERROR_ORE (0x00000008U) |
#define | HAL_IRDA_ERROR_DMA (0x00000010U) |
#define | HAL_IRDA_ERROR_BUSY (0x00000020U) |
#define | IRDA_PARITY_NONE 0x00000000U |
#define | IRDA_PARITY_EVEN USART_CR1_PCE |
#define | IRDA_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS) |
#define | IRDA_MODE_RX USART_CR1_RE |
#define | IRDA_MODE_TX USART_CR1_TE |
#define | IRDA_MODE_TX_RX (USART_CR1_TE |USART_CR1_RE) |
#define | IRDA_POWERMODE_NORMAL 0x00000000U |
#define | IRDA_POWERMODE_LOWPOWER USART_CR3_IRLP |
#define | IRDA_PRESCALER_DIV1 0x00000000U |
#define | IRDA_PRESCALER_DIV2 0x00000001U |
#define | IRDA_PRESCALER_DIV4 0x00000002U |
#define | IRDA_PRESCALER_DIV6 0x00000003U |
#define | IRDA_PRESCALER_DIV8 0x00000004U |
#define | IRDA_PRESCALER_DIV10 0x00000005U |
#define | IRDA_PRESCALER_DIV12 0x00000006U |
#define | IRDA_PRESCALER_DIV16 0x00000007U |
#define | IRDA_PRESCALER_DIV32 0x00000008U |
#define | IRDA_PRESCALER_DIV64 0x00000009U |
#define | IRDA_PRESCALER_DIV128 0x0000000AU |
#define | IRDA_PRESCALER_DIV256 0x0000000BU |
#define | IRDA_STATE_DISABLE 0x00000000U |
#define | IRDA_STATE_ENABLE USART_CR1_UE |
#define | IRDA_MODE_DISABLE 0x00000000U |
#define | IRDA_MODE_ENABLE USART_CR3_IREN |
#define | IRDA_ONE_BIT_SAMPLE_DISABLE 0x00000000U |
#define | IRDA_ONE_BIT_SAMPLE_ENABLE USART_CR3_ONEBIT |
#define | IRDA_DMA_TX_DISABLE 0x00000000U |
#define | IRDA_DMA_TX_ENABLE USART_CR3_DMAT |
#define | IRDA_DMA_RX_DISABLE 0x00000000U |
#define | IRDA_DMA_RX_ENABLE USART_CR3_DMAR |
#define | IRDA_AUTOBAUD_REQUEST USART_RQR_ABRRQ |
#define | IRDA_RXDATA_FLUSH_REQUEST USART_RQR_RXFRQ |
#define | IRDA_TXDATA_FLUSH_REQUEST USART_RQR_TXFRQ |
#define | IRDA_FLAG_REACK USART_ISR_REACK |
#define | IRDA_FLAG_TEACK USART_ISR_TEACK |
#define | IRDA_FLAG_BUSY USART_ISR_BUSY |
#define | IRDA_FLAG_ABRF USART_ISR_ABRF |
#define | IRDA_FLAG_ABRE USART_ISR_ABRE |
#define | IRDA_FLAG_TXE USART_ISR_TXE_TXFNF |
#define | IRDA_FLAG_TC USART_ISR_TC |
#define | IRDA_FLAG_RXNE USART_ISR_RXNE_RXFNE |
#define | IRDA_FLAG_ORE USART_ISR_ORE |
#define | IRDA_FLAG_NE USART_ISR_NE |
#define | IRDA_FLAG_FE USART_ISR_FE |
#define | IRDA_FLAG_PE USART_ISR_PE |
#define | IRDA_IT_PE 0x0028U |
#define | IRDA_IT_TXE 0x0727U |
#define | IRDA_IT_TC 0x0626U |
#define | IRDA_IT_RXNE 0x0525U |
#define | IRDA_IT_IDLE 0x0424U |
#define | IRDA_IT_ERR 0x0060U |
#define | IRDA_IT_ORE 0x0300U |
#define | IRDA_IT_NE 0x0200U |
#define | IRDA_IT_FE 0x0100U |
#define | IRDA_CLEAR_PEF USART_ICR_PECF |
#define | IRDA_CLEAR_FEF USART_ICR_FECF |
#define | IRDA_CLEAR_NEF USART_ICR_NECF |
#define | IRDA_CLEAR_OREF USART_ICR_ORECF |
#define | IRDA_CLEAR_IDLEF USART_ICR_IDLECF |
#define | IRDA_CLEAR_TCF USART_ICR_TCCF |
#define | IRDA_IT_MASK 0x001FU |
#define | IRDA_CR_MASK 0x00E0U |
#define | IRDA_CR_POS 5U |
#define | IRDA_ISR_MASK 0x1F00U |
#define | IRDA_ISR_POS 8U |
#define | __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) |
Reset IRDA handle state. | |
#define | __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) |
Flush the IRDA DR register. | |
#define | __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) |
Clear the specified IRDA pending flag. | |
#define | __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF) |
Clear the IRDA PE pending flag. | |
#define | __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF) |
Clear the IRDA FE pending flag. | |
#define | __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF) |
Clear the IRDA NE pending flag. | |
#define | __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF) |
Clear the IRDA ORE pending flag. | |
#define | __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF) |
Clear the IRDA IDLE pending flag. | |
#define | __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) |
Check whether the specified IRDA flag is set or not. | |
#define | __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) |
Enable the specified IRDA interrupt. | |
#define | __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) |
Disable the specified IRDA interrupt. | |
#define | __HAL_IRDA_GET_IT(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISR& (0x01U << (((__INTERRUPT__) & IRDA_ISR_MASK)>>IRDA_ISR_POS))) != 0U) ? SET : RESET) |
Check whether the specified IRDA interrupt has occurred or not. | |
#define | __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) |
Check whether the specified IRDA interrupt source is enabled or not. | |
#define | __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) |
Clear the specified IRDA ISR flag, in setting the proper ICR register flag. | |
#define | __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) |
Set a specific IRDA request flag. | |
#define | __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) |
Enable the IRDA one bit sample method. | |
#define | __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) |
Disable the IRDA one bit sample method. | |
#define | __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
Enable UART/USART associated to IRDA Handle. | |
#define | __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
Disable UART/USART associated to IRDA Handle. | |
#define | IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U) |
Ensure that IRDA Baud rate is less or equal to maximum value. | |
#define | IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U) |
Ensure that IRDA prescaler value is strictly larger than 0. | |
#define | IS_IRDA_PARITY(__PARITY__) |
Ensure that IRDA frame parity is valid. | |
#define | IS_IRDA_TX_RX_MODE(__MODE__) |
Ensure that IRDA communication mode is valid. | |
#define | IS_IRDA_POWERMODE(__MODE__) |
Ensure that IRDA power mode is valid. | |
#define | IS_IRDA_CLOCKPRESCALER(__CLOCKPRESCALER__) |
Ensure that IRDA clock Prescaler is valid. | |
#define | IS_IRDA_STATE(__STATE__) |
Ensure that IRDA state is valid. | |
#define | IS_IRDA_MODE(__MODE__) |
Ensure that IRDA associated UART/USART mode is valid. | |
#define | IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) |
Ensure that IRDA sampling rate is valid. | |
#define | IS_IRDA_DMA_TX(__DMATX__) |
Ensure that IRDA DMA TX mode is valid. | |
#define | IS_IRDA_DMA_RX(__DMARX__) |
Ensure that IRDA DMA RX mode is valid. | |
#define | IS_IRDA_REQUEST_PARAMETER(__PARAM__) |
Ensure that IRDA request is valid. | |
Typedefs | |
typedef uint32_t | HAL_IRDA_StateTypeDef |
HAL IRDA State definition. | |
Enumerations | |
enum | IRDA_ClockSourceTypeDef { IRDA_CLOCKSOURCE_D2PCLK1 = 0x11U , IRDA_CLOCKSOURCE_D2PCLK2 = 0x12U , IRDA_CLOCKSOURCE_PLL2Q = 0x14U , IRDA_CLOCKSOURCE_PLL3Q = 0x18U , IRDA_CLOCKSOURCE_HSI = 0x02U , IRDA_CLOCKSOURCE_CSI = 0x08U , IRDA_CLOCKSOURCE_LSE = 0x10U , IRDA_CLOCKSOURCE_UNDEFINED = 0x20U } |
IRDA clock sources definition. More... | |
Functions | |
HAL_StatusTypeDef | HAL_IRDA_Init (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_DeInit (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_MspInit (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_MspDeInit (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_Transmit (IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size, uint32_t Timeout) |
HAL_StatusTypeDef | HAL_IRDA_Receive (IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout) |
HAL_StatusTypeDef | HAL_IRDA_Transmit_IT (IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_IRDA_Receive_IT (IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_IRDA_Transmit_DMA (IRDA_HandleTypeDef *hirda, const uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_IRDA_Receive_DMA (IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size) |
HAL_StatusTypeDef | HAL_IRDA_DMAPause (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_DMAResume (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_DMAStop (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_Abort (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_AbortTransmit (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_AbortReceive (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_Abort_IT (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_AbortTransmit_IT (IRDA_HandleTypeDef *hirda) |
HAL_StatusTypeDef | HAL_IRDA_AbortReceive_IT (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_IRQHandler (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_TxCpltCallback (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_RxCpltCallback (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_TxHalfCpltCallback (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_RxHalfCpltCallback (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_ErrorCallback (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_AbortCpltCallback (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_AbortTransmitCpltCallback (IRDA_HandleTypeDef *hirda) |
void | HAL_IRDA_AbortReceiveCpltCallback (IRDA_HandleTypeDef *hirda) |
HAL_IRDA_StateTypeDef | HAL_IRDA_GetState (const IRDA_HandleTypeDef *hirda) |
uint32_t | HAL_IRDA_GetError (const IRDA_HandleTypeDef *hirda) |
Header file of IRDA HAL module.
Copyright (c) 2017 STMicroelectronics. All rights reserved.
This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.