system_stm32h7xx.c File Reference

CMSIS Cortex-M Device Peripheral Access Layer System Source File. More...

#include "stm32h7xx.h"
#include <math.h>

Macros
#define	HSE_VALUE   ((uint32_t)24000000)
#define	CSI_VALUE   ((uint32_t)4000000)
#define	HSI_VALUE   ((uint32_t)64000000)
#define	VECT_TAB_OFFSET   0x00000000UL

Functions
void	SystemInit (void)
	Setup the microcontroller system Initialize the FPU setting and vector table location configuration.
void	SystemCoreClockUpdate (void)
	Update SystemCoreClock variable according to Clock Register Values. The SystemCoreClock variable contains the core clock , it can be used by the user application to setup the SysTick timer or configure other parameters.

Variables
uint32_t	SystemCoreClock = 64000000
	System clock frequency (core clock)
uint32_t	SystemD2Clock = 64000000
const uint8_t	D1CorePrescTable [16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}

Detailed Description

CMSIS Cortex-M Device Peripheral Access Layer System Source File.

CMSIS Cortex-Mx Device Peripheral Access Layer System Source File.

Author

MCD Application Team

This file provides two functions and one global variable to be called from user application:

• SystemInit(): This function is called at startup just after reset and before branch to main program. This call is made inside the "startup_stm32h7xx.s" file.
• SystemCoreClock variable: Contains the core clock (HCLK), it can be used by the user application to setup the SysTick timer or configure other parameters.
• SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must be called whenever the core clock is changed during program execution.

Attention

© Copyright (c) 2017 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Author

MCD Application Team

This file provides two functions and one global variable to be called from user application:

• SystemInit(): This function is called at startup just after reset and before branch to main program. This call is made inside the "startup_stm32h7xx.s" file.
• SystemCoreClock variable: Contains the core clock (HCLK), it can be used by the user application to setup the SysTick timer or configure other parameters.
• SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must be called whenever the core clock is changed during program execution.

Attention

Copyright (c) 2018 STMicroelectronics. All rights reserved.

This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.