lpc22xx_uart.h File Reference

UART support. More...

Go to the source code of this file.

Macros
#define	FIFODEEP   16
#define	BD115200   115200
#define	BD38400   38400
#define	BD9600   9600
#define	U0_PINSEL   (0x00000005)
	PINSEL0 Value for UART0.
#define	U0_PINMASK   (0x0000000F)
	PINSEL0 Mask for UART0.
#define	U1_PINSEL   (0x00050000)
	PINSEL0 Value for UART1.
#define	U1_PINMASK   (0x000F0000)
	PINSEL0 Mask for UART1.
Uart line control register bit descriptions
#define	LCR_WORDLENTH_BIT   0
#define	LCR_STOPBITSEL_BIT   2
#define	LCR_PARITYENBALE_BIT   3
#define	LCR_PARITYSEL_BIT   4
#define	LCR_BREAKCONTROL_BIT   6
#define	LCR_DLAB_BIT   7
Line Control Register bit definitions
#define	ULCR_CHAR_5   (0 << 0)
	5-bit character length
#define	ULCR_CHAR_6   (1 << 0)
	6-bit character length
#define	ULCR_CHAR_7   (2 << 0)
	7-bit character length
#define	ULCR_CHAR_8   (3 << 0)
	8-bit character length
#define	ULCR_STOP_0   (0 << 2)
	no stop bits
#define	ULCR_STOP_1   (1 << 2)
	1 stop bit
#define	ULCR_PAR_NO   (0 << 3)
	No Parity.
#define	ULCR_PAR_ODD   (1 << 3)
	Odd Parity.
#define	ULCR_PAR_EVEN   (3 << 3)
	Even Parity.
#define	ULCR_PAR_MARK   (5 << 3)
	MARK "1" Parity.
#define	ULCR_PAR_SPACE   (7 << 3)
	SPACE "0" Paruty.
#define	ULCR_BREAK_ENABLE   (1 << 6)
	Output BREAK line condition.
#define	ULCR_DLAB_ENABLE   (1 << 7)
	Enable Divisor Latch Access.
Modem Control Register bit definitions
#define	UMCR_DTR   (1 << 0)
	Data Terminal Ready.
#define	UMCR_RTS   (1 << 1)
	Request To Send.
#define	UMCR_LB   (1 << 4)
	Loopback.
Line Status Register bit definitions
#define	ULSR_RDR   (1 << 0)
	Receive Data Ready.
#define	ULSR_OE   (1 << 1)
	Overrun Error.
#define	ULSR_PE   (1 << 2)
	Parity Error.
#define	ULSR_FE   (1 << 3)
	Framing Error.
#define	ULSR_BI   (1 << 4)
	Break Interrupt.
#define	ULSR_THRE   (1 << 5)
	Transmit Holding Register Empty.
#define	ULSR_TEMT   (1 << 6)
	Transmitter Empty.
#define	ULSR_RXFE   (1 << 7)
	Error in Receive FIFO.
#define	ULSR_ERR_MASK   0x1E
Modem Status Register bit definitions
#define	UMSR_DCTS   (1 << 0)
	Delta Clear To Send.
#define	UMSR_DDSR   (1 << 1)
	Delta Data Set Ready.
#define	UMSR_TERI   (1 << 2)
	Trailing Edge Ring Indicator.
#define	UMSR_DDCD   (1 << 3)
	Delta Data Carrier Detect.
#define	UMSR_CTS   (1 << 4)
	Clear To Send.
#define	UMSR_DSR   (1 << 5)
	Data Set Ready.
#define	UMSR_RI   (1 << 6)
	Ring Indicator.
#define	UMSR_DCD   (1 << 7)
	Data Carrier Detect.
Uart Interrupt Identification
#define	IIR_RSL   0x3
#define	IIR_RDA   0x2
#define	IIR_CTI   0x6
#define	IIR_THRE   0x1
Uart Interrupt Enable Type
#define	IER_RBR   0x1
#define	IER_THRE   0x2
#define	IER_RLS   0x4
Uart Receiver Errors
#define	RC_FIFO_OVERRUN_ERR   0x1
#define	RC_OVERRUN_ERR   0x2
#define	RC_PARITY_ERR   0x4
#define	RC_FRAMING_ERR   0x8
#define	RC_BREAK_IND   0x10

Enumerations
enum	LPC_UartChanel_t { UART0 = 0 , UART1 }

Detailed Description

UART support.