2.7. Test a Board Support Package (BSP)

You built a BSP with tests in the previous section. We built the erc32 BSP in $HOME/quick-start/build/b-erc32.

You should run the RTEMS test suite on your target hardware. The RTEMS Project provides some support to do this, see the Testing chapter for the details.

On the erc32 BSP we selected for this quick start chapter this is easy. Just run this command:

cd $HOME/quick-start/build/b-erc32
rtems-test --rtems-bsp=erc32-sis --rtems-tools=$HOME/quick-start/rtems/5 .

This command should output something like this (omitted lines are denoted by …). In this output the base directory $HOME/quick-start was replaced by $BASE.

RTEMS Testing - Tester, 5.1.0
 Command Line: $BASE/rtems/5/bin/rtems-test --rtems-bsp=erc32-sis --rtems-tools=$BASE/rtems/5 .
 Python: 2.7.15 (default, Jan 10 2019, 01:14:47) [GCC 4.2.1 Compatible FreeBSD Clang 6.0.1 (tags/RELEASE_601/final 335540)]
Host: FreeBSD-12.0-RELEASE-p2-amd64-64bit-ELF (FreeBSD Build_FreeBSD12 12.0-RELEASE-p2 FreeBSD 12.0-RELEASE-p2 GENERIC amd64 amd64)
[  1/589] p:0   f:0   u:0   e:0   I:0   B:0   t:0   i:0   W:0   | sparc/erc32: dhrystone.exe
...
[589/589] p:574 f:0   u:5   e:0   I:0   B:3   t:0   i:0   W:0   | sparc/erc32: tmtimer01.exe

Passed:        580
Failed:          0
User Input:      5
Expected Fail:   0
Indeterminate:   0
Benchmark:       3
Timeout:         1
Invalid:         0
Wrong Version:   0
Wrong Build:     0
Wrong Tools:     0
------------------
Total:         589
User Input:
 monitor.exe
 termios.exe
 top.exe
 fileio.exe
 capture.exe
Benchmark:
 whetstone.exe
 linpack.exe
 dhrystone.exe
Timeouts:
 pppd.exe
Average test time: 0:00:00.437773
Testing time     : 0:04:17.848557