Detailed Description

Provides the interface to configure and use the GMAC peripheral.

Usage

Configure Gmac::GMAC_NCFG with GMAC_Configure(), some of related controls are also available, such as:
- GMAC_SetSpeed(): Setup GMAC working clock.
- GMAC_FullDuplexEnable(): Working in full duplex or not.
- GMAC_CpyAllEnable(): Copying all valid frames (GMAC_NCFG_CAF).
- ...
Setup Gmac::GMAC_NCR with GMAC_NetworkControl(), more related controls can modify with:
- GMAC_ReceiveEnable(): Enable/Disable Rx.
- GMAC_TransmitEnable(): Enable/Disable Tx.
- GMAC_BroadcastDisable(): Enable/Disable broadcast receiving.
- ...
Manage GMAC interrupts with GMAC_EnableIt(), GMAC_DisableIt(), GMAC_GetItMask() and GMAC_GetItStatus().
Manage GMAC Tx/Rx status with GMAC_GetTxStatus(), GMAC_GetRxStatus() GMAC_ClearTxStatus() and GMAC_ClearRxStatus().
Manage GMAC Queue with GMAC_SetTxQueue(), GMAC_GetTxQueue(), GMAC_SetRxQueue() and GMAC_GetRxQueue(), the queue descriptor can define by sGmacRxDescriptor and sGmacTxDescriptor.
Manage PHY through GMAC is performed by
- GMAC_ManagementEnable(): Enable/Disable PHY management.
- GMAC_PHYMaintain(): Execute PHY management commands.
- GMAC_PHYData(): Return PHY management data.
- GMAC_IsIdle(): Check if PHY is idle.
Setup GMAC parameters with following functions:
- GMAC_SetHash(): Set Hash value.
- GMAC_SetAddress(): Set MAC address.
Enable/Disable GMAC transceiver clock via GMAC_TransceiverClockEnable()
Switch GMAC MII/RMII mode through GMAC_RMIIEnable()

For more accurate information, please look at the GMAC section of the Datasheet.

Related files:
gmac.c
gmac.h.