2016-08-15T05:36:25 *** mumptai has joined #rtems 2016-08-15T05:53:06 *** monstr has joined #rtems 2016-08-15T06:12:43 *** Davidbrcz has joined #rtems 2016-08-15T06:25:48 *** Davidbrcz has quit IRC 2016-08-15T06:36:17 *** mumptai has quit IRC 2016-08-15T06:51:56 *** cdesai has quit IRC 2016-08-15T06:52:34 *** cdesai has joined #rtems 2016-08-15T07:11:55 *** Davidbrcz has joined #rtems 2016-08-15T07:41:03 *** benjamint has joined #rtems 2016-08-15T07:44:49 *** Davidbrcz has quit IRC 2016-08-15T07:55:53 [git] 75386e1 by Chris Johns: [libdl: Add trace output when reading section headers.] http://devel.rtems.org/changeset/75386e1/rtems 2016-08-15T07:55:53 [git] 58c3496 by Chris Johns: [libdl: Fix cache corruption bugs. This patch fixes a number of bugs in the cache when requests are made to read close to the end of the file and the data is copied from the top of the cache buffer to the bottom of the buffer. This was compounded by attempting to read past the end of the file. Closes #2754.] 2016-08-15T07:55:53 http://devel.rtems.org/changeset/58c3496/rtems 2016-08-15T07:55:53 [git] 97d395b by Chris Johns: [testsuite: Add libdl/dl03 cache test.] http://devel.rtems.org/changeset/97d395b/rtems 2016-08-15T07:59:04 *** benjamint has quit IRC 2016-08-15T08:03:23 *** benjamint has joined #rtems 2016-08-15T08:07:38 [git] 381c42b by Chris Johns: [testsuite: Add libdl/dl04 cache test.] http://devel.rtems.org/changeset/381c42b/rtems 2016-08-15T08:09:16 [trac] #2754/defect (closed) updated by Chris Johns (In [changeset:"35edf82463f33d30e6bbbbbbafe3aadd80acffbb/rtems"]: {{{ ...) http://devel.rtems.org/ticket/2754 2016-08-15T08:09:17 [git] 25c5583 by Chris Johns: [libdl: Add trace output when reading section headers.] http://devel.rtems.org/changeset/25c5583/rtems 2016-08-15T08:09:18 [git] 35edf82 by Chris Johns: [libdl: Fix cache corruption bugs. This patch fixes a number of bugs in the cache when requests are made to read close to the end of the file and the data is copied from the top of the cache buffer to the bottom of the buffer. This was compounded by attempting to read past the end of the file. Closes #2754.] 2016-08-15T08:09:18 http://devel.rtems.org/changeset/35edf82/rtems 2016-08-15T08:09:45 *** benjamint has joined #rtems 2016-08-15T08:10:55 /quit 2016-08-15T10:26:09 *** amraw has joined #rtems 2016-08-15T10:51:11 *** Davidbrcz has joined #rtems 2016-08-15T11:05:49 *** benjamint has quit IRC 2016-08-15T11:08:55 *** Davidbrcz has quit IRC 2016-08-15T11:12:32 *** benjamint has joined #rtems 2016-08-15T14:04:37 *** Davidbrcz has joined #rtems 2016-08-15T14:06:48 *** Davidbrcz_ has joined #rtems 2016-08-15T14:21:58 *** gedare has joined #rtems 2016-08-15T14:21:58 *** ChanServ sets mode: +o gedare 2016-08-15T14:47:12 *** dougk_ has quit IRC 2016-08-15T14:53:09 *** amraw has quit IRC 2016-08-15T14:59:34 *** monstr has quit IRC 2016-08-15T15:49:27 [trac] Developer/Simulators/QEMU edited by salpha (empty comment) http://devel.rtems.org/wiki/Developer/Simulators/QEMU 2016-08-15T15:58:54 *** amraw has joined #rtems 2016-08-15T17:03:43 *** jkridner|playdoh has joined #rtems 2016-08-15T17:37:18 *** dr__house|away is now known as dr__house 2016-08-15T17:51:15 *** benjamint has quit IRC 2016-08-15T18:03:40 *** mumptai has joined #rtems 2016-08-15T18:12:03 *** jkridner|playdoh has quit IRC 2016-08-15T18:21:03 *** jkridner|playdoh has joined #rtems 2016-08-15T18:25:49 *** jkridner|work has joined #rtems 2016-08-15T18:29:04 *** jkridner has quit IRC 2016-08-15T18:56:49 *** Davidbrcz has quit IRC 2016-08-15T19:59:49 *** jkridner|playdoh has quit IRC 2016-08-15T20:01:08 *** jkridner has joined #rtems 2016-08-15T20:03:10 *** amraw has quit IRC 2016-08-15T20:21:04 *** Davidbrcz has joined #rtems 2016-08-15T20:54:22 *** jkridner has quit IRC 2016-08-15T20:54:39 *** jkridner has joined #rtems 2016-08-15T20:55:56 *** jkridner has joined #rtems 2016-08-15T21:00:22 *** jkridner_ has joined #rtems 2016-08-15T21:00:29 *** Davidbrcz has quit IRC 2016-08-15T21:00:48 *** gedare has quit IRC 2016-08-15T21:01:09 *** jkridner|work has quit IRC 2016-08-15T21:05:34 *** jkridner|playdoh has joined #rtems 2016-08-15T21:06:45 *** jkridner_ has quit IRC 2016-08-15T21:06:56 *** jkridner_ has joined #rtems 2016-08-15T21:07:03 *** jkridner|work has joined #rtems 2016-08-15T21:09:20 *** jkridner has quit IRC 2016-08-15T21:10:18 *** jkridner|playdoh has quit IRC 2016-08-15T21:20:30 *** jkridner_ has quit IRC 2016-08-15T21:21:03 *** jkridner has joined #rtems 2016-08-15T21:22:31 *** mumptai has quit IRC 2016-08-15T21:52:31 *** jkridner_ has joined #rtems 2016-08-15T21:53:23 *** jkridner|playdoh has joined #rtems 2016-08-15T21:54:13 *** jkridner|work has quit IRC 2016-08-15T21:54:22 *** jkridner has quit IRC 2016-08-15T21:54:33 *** jkridner has joined #rtems 2016-08-15T21:57:22 *** jkridner_ has quit IRC 2016-08-15T22:27:06 *** jkridner|playdoh has quit IRC 2016-08-15T22:29:01 *** jkridner|playdoh has joined #rtems 2016-08-15T22:57:52 *** jkridner has quit IRC 2016-08-15T23:02:15 *** jkridner|playdoh has quit IRC 2016-08-15T23:02:35 *** jkridner has joined #rtems 2016-08-16T00:44:27 *** amraw has joined #rtems 2016-08-16T01:02:56 *** dr__house is now known as dr__house|away 2016-08-16T04:37:19 *** monstr has joined #rtems 2016-08-16T05:32:19 *** mumptai has joined #rtems 2016-08-16T05:38:49 *** sebhub has joined #rtems 2016-08-16T05:39:43 good morning 2016-08-16T05:42:33 *** Guest8090 has quit IRC 2016-08-16T05:50:11 hi 2016-08-16T05:53:02 *** darnir- has joined #rtems 2016-08-16T07:18:42 [git] 6634edb by Christian Mauderer: [devfs: Create path.] http://devel.rtems.org/changeset/6634edb/rtems-libbsd 2016-08-16T07:18:43 [git] 69355c3 by Christian Mauderer: [devfs: Add some notes on implementation.] http://devel.rtems.org/changeset/69355c3/rtems-libbsd 2016-08-16T07:51:40 *** mumptai has quit IRC 2016-08-16T08:14:51 *** jkridner has quit IRC 2016-08-16T08:18:08 *** jkridner has joined #rtems 2016-08-16T08:27:46 *** benjamint has joined #rtems 2016-08-16T08:54:01 [trac] Developer/Projects/Open/RockOnRTEMS edited by Sambeet (empty comment) http://devel.rtems.org/wiki/Developer/Projects/Open/RockOnRTEMS 2016-08-16T10:33:09 *** amraw has quit IRC 2016-08-16T11:19:39 *** benjamint has quit IRC 2016-08-16T12:29:50 *** jkridner|pd has joined #rtems 2016-08-16T12:30:00 *** jkridner has quit IRC 2016-08-16T13:48:37 *** benjamint has joined #rtems 2016-08-16T13:52:20 *** jkridner|pd has quit IRC 2016-08-16T13:52:37 *** jkridner has joined #rtems 2016-08-16T13:59:20 *** gedare has joined #rtems 2016-08-16T13:59:20 *** ChanServ sets mode: +o gedare 2016-08-16T14:02:13 *** jkridner has quit IRC 2016-08-16T14:17:07 *** jkridner has joined #rtems 2016-08-16T14:18:38 *** jkridner|pd has joined #rtems 2016-08-16T14:22:19 *** jkridner has quit IRC 2016-08-16T14:26:46 *** jkridner|pd has quit IRC 2016-08-16T14:29:43 *** jkridner has joined #rtems 2016-08-16T14:32:16 *** darnir has quit IRC 2016-08-16T14:35:02 *** darnir has joined #rtems 2016-08-16T14:48:30 *** jkridner has quit IRC 2016-08-16T14:49:21 *** jkridner has joined #rtems 2016-08-16T16:10:42 *** amraw has joined #rtems 2016-08-16T16:17:12 *** jkridner has quit IRC 2016-08-16T16:17:37 *** jkridner has joined #rtems 2016-08-16T16:55:14 *** Davidbrcz has joined #rtems 2016-08-16T17:19:09 *** mumptai has joined #rtems 2016-08-16T17:34:54 *** benjamint has quit IRC 2016-08-16T17:49:59 *** Davidbrcz has quit IRC 2016-08-16T17:50:10 *** monstr has quit IRC 2016-08-16T17:59:05 *** dr__house|away is now known as dr__house 2016-08-16T18:02:33 *** benjamint has joined #rtems 2016-08-16T18:13:10 *** amraw has quit IRC 2016-08-16T20:10:54 *** ita is now known as ita|zzz 2016-08-16T20:23:06 *** Davidbrcz has joined #rtems 2016-08-16T20:35:28 *** jkridner has quit IRC 2016-08-16T20:36:05 *** jkridner has joined #rtems 2016-08-16T20:50:37 *** mumptai has quit IRC 2016-08-16T21:01:08 *** gedare has quit IRC 2016-08-16T22:04:54 *** Davidbrcz has quit IRC 2016-08-16T22:49:16 *** gedare has joined #rtems 2016-08-16T22:49:16 *** ChanServ sets mode: +o gedare 2016-08-16T23:00:40 *** gedare has quit IRC 2016-08-17T00:18:30 *** benjamint has quit IRC 2016-08-17T01:18:20 *** jkridner|pd has joined #rtems 2016-08-17T01:21:25 *** jkridner has quit IRC 2016-08-17T01:47:27 *** amraw has joined #rtems 2016-08-17T02:04:30 *** dr__house is now known as dr__house|away 2016-08-17T04:03:10 *** amraw has quit IRC 2016-08-17T05:21:34 *** monstr has joined #rtems 2016-08-17T05:36:59 *** jkridner|pd has quit IRC 2016-08-17T06:11:46 *** jkridner has joined #rtems 2016-08-17T06:16:00 *** jkridner has quit IRC 2016-08-17T06:22:43 *** Davidbrcz has joined #rtems 2016-08-17T06:41:44 *** amraw has joined #rtems 2016-08-17T07:22:34 *** Davidbrcz has quit IRC 2016-08-17T07:34:22 [trac] #2775/defect (reopened) updated by sebastian.huber (This change breaks a lot of ARM BSPs since bsp_translation_table_end is not defined.) http://devel.rtems.org/ticket/2775 2016-08-17T07:41:49 [trac] #2775/defect (reopened) updated by chrisj (If you have a list I can add them to ...) http://devel.rtems.org/ticket/2775 2016-08-17T08:18:38 [trac] #2775/defect (reopened) updated by sebastian.huber (You can use "/path/to/rtems/configure --target=arm-rtems4.12 ...) http://devel.rtems.org/ticket/2775 2016-08-17T08:31:44 *** jkridner has joined #rtems 2016-08-17T08:36:43 *** benjamint has joined #rtems 2016-08-17T09:19:34 *** salpha has joined #rtems 2016-08-17T09:33:20 *** jkridner has quit IRC 2016-08-17T11:03:11 *** amraw has quit IRC 2016-08-17T12:45:41 *** Wonjun has joined #rtems 2016-08-17T13:00:13 *** Wonjun_ has joined #rtems 2016-08-17T13:03:26 *** Wonjun has quit IRC 2016-08-17T13:17:17 *** bdiopxv has joined #rtems 2016-08-17T13:17:30 Dear all, 2016-08-17T13:20:50 May I ask you something: I would like to test the performances of one of my POSIX program running on RTEMS-libbsd vs standard OS. Thus I need to monitor in real-time the performances. Do you think it is yield with the current API ? if so, do you have any idea on how to do it ? Any help would be great !!! Kind Regards 2016-08-17T13:25:22 sorry, what is your question? 2016-08-17T13:26:21 Hi sebhub 2016-08-17T13:27:56 thank you for your answer. I would like to monitor RTEMS performances on RTEMS-libbsd. I want to know if it is feasible with the current API of RTEMS and if so how to perform it efficiently 2016-08-17T13:28:43 how do you define performance? 2016-08-17T13:29:25 For example memory and CPU usage, number of threads used ... 2016-08-17T13:29:58 yes, you can use some RTEMS shell commands for this, see the RTEMS shell user manual 2016-08-17T13:30:44 however, some freebsd commands like memstat are missing in libbsd 2016-08-17T13:30:52 yes I saw it but has I am using my program, I would like to see the performance while using my program 2016-08-17T13:31:25 just add everything to one application 2016-08-17T13:32:22 so basically I have to search for the requested program (CPU usage) and put it on my main file right ? 2016-08-17T13:33:03 in RTEMS everything is statically linked into one executabel 2016-08-17T13:33:27 it is not a multi-process envirionment with user/kernel space separation 2016-08-17T13:33:51 Yes that's right 2016-08-17T13:35:06 To maybe save some time, do you know the name of the program in rtems-libbsd and its probable location ? 2016-08-17T13:35:47 which program? 2016-08-17T13:36:20 sorry the CPU and memory monitoring 2016-08-17T13:36:45 they are not in libbsd, the are part of RTEMS 2016-08-17T13:37:05 "malloc" and "cpuuse" are the RTEMS shell command names 2016-08-17T13:42:04 Thank you very much for your indications ! 2016-08-17T13:44:20 for a libbsd memory overview the memstat command would be helpful, which is currently not available 2016-08-17T13:44:29 see also "netstat" for some UMA statistics 2016-08-17T13:44:55 if you have questions, see freebsd man pages 2016-08-17T13:48:24 thank you very much :) 2016-08-17T13:55:45 *** _sambeet has joined #rtems 2016-08-17T13:56:00 <_sambeet> hi 2016-08-17T13:56:57 *** gedare has joined #rtems 2016-08-17T13:56:57 *** ChanServ sets mode: +o gedare 2016-08-17T13:57:38 hello 2016-08-17T13:57:46 *** mudit1729 has joined #rtems 2016-08-17T13:58:03 *** salpha has joined #rtems 2016-08-17T13:58:29 <_sambeet> Good morning 2016-08-17T13:58:53 hi 2016-08-17T13:59:49 hello 2016-08-17T14:00:39 ok. this will be our last weekly meeting for gsoc 2016-08-17T14:00:40 Hi everyone 2016-08-17T14:01:06 because after this you should be finishing your code submission, doing your mentor evaluation, and making sure your mentor has evaluated you. :0 2016-08-17T14:01:46 *** DrJoel has joined #rtems 2016-08-17T14:01:46 *** DrJoel has joined #rtems 2016-08-17T14:01:46 *** ChanServ sets mode: +o DrJoel 2016-08-17T14:02:03 you should ask your mentor to "check" your URL for submission. Not all mentors may know the rules though so you might want to send those along too, or find a link that explains the new GSoC submission rules. 2016-08-17T14:02:38 so let's get down to business, Wonjun_ would you like to start? 2016-08-17T14:03:45 sure 2016-08-17T14:04:16 I am trying to execute patched rtems on jailhouse and hardware until now. 2016-08-17T14:04:28 and I wrote a post at my blog about refactoring pach files and where I should modify. 2016-08-17T14:04:56 As you memtioned, I am trying to add configure options. 2016-08-17T14:05:39 I owe you a response to your email since I did the pci io changes and initially added the limited APIC support you mentioned. 2016-08-17T14:05:41 ok well you should be able to add a bspopt easily even if it does nothing 2016-08-17T14:06:06 and then start to modify the clock driver to use the apic based on the bspopt setting 2016-08-17T14:06:17 if you need help you should definitely ask 2016-08-17T14:06:52 [trac] SOCIS/2016 edited by salpha (empty comment) http://devel.rtems.org/wiki/SOCIS/2016 2016-08-17T14:07:15 I am trying to find how to debug rtems on qemu but I cannot find. do you have some documents? 2016-08-17T14:07:47 https://devel.rtems.org/wiki/Developer/Simulators/QEMU#DebuggingwithQEMU 2016-08-17T14:08:54 you have to start qemu with -s -S options 2016-08-17T14:09:33 Thanks should I add options when I compile rtems? 2016-08-17T14:09:55 shouldn't need to do that 2016-08-17T14:10:13 where do you have your code changes for starting to add the configure options and apic code? 2016-08-17T14:12:10 I will make x2apic.h like apic.h 2016-08-17T14:12:53 ok. i didn't see much response or action after our discussion last week so I did not know how you were proceeding. time is really tight to make some kind of progress here 2016-08-17T14:13:02 I would really like to see a working apic timer for RTEMS 2016-08-17T14:13:16 I suspect that is enough to get a simple jailhouse BSP to work. 2016-08-17T14:13:36 ok thanks Wonjun_ anything else we can disucss by email 2016-08-17T14:13:43 Thanks. 2016-08-17T14:13:43 _sambeet: you can go next, hi _sambeet 2016-08-17T14:14:07 <_sambeet> This week I was working on my final blog post. I tried to provide every problem I faced and work I had done in it.I have also updated the wiki pages about it. I am also compiling a static version of RTT. I have updated the blog as per your suggestion ,the commands were added for RTEMS threading libraries. This leaves me with a fewer errors.Now the only linking errors are with Boost. The RSB recipes for libxml is not working.It was n 2016-08-17T14:15:06 <_sambeet> The problem with the RTT was I thought RTEMS uses a separate threading library 2016-08-17T14:15:59 We added gcc support a while back to eat the -pthread option to minimize user visible argument changes but there is no libpthread. You obviously now know that. 2016-08-17T14:16:26 <_sambeet> But rtemsbsp and atomic ahve all the pthread functions inherent 2016-08-17T14:16:38 *** vivekk has joined #rtems 2016-08-17T14:16:41 ah. now i wonder, how did you test the cross-compiled libraries you previuosly built? 2016-08-17T14:17:30 <_sambeet> They had that option in the script from previous port. 2016-08-17T14:18:12 i mean to say, that it would be nice to provide a little example RTEMS application that links against each of the xcc'd libs 2016-08-17T14:18:13 Have you started submitting RSB recipes? 2016-08-17T14:19:31 <_sambeet> No sir, for libxml the script is not able to detect the configure file 2016-08-17T14:20:14 <_sambeet> I will mail my scripts to Chris for help 2016-08-17T14:20:59 File a ticket, include the RSB recipe and/or script and info/procedure. That way I can try to help also. I have ported a number of packages. 2016-08-17T14:21:12 Now as good at the RSB recipes. :( 2016-08-17T14:22:33 <_sambeet> I am sorry but I am a little unaware of when to file a ticket? Isn't posting in the mailing list the same thing? 2016-08-17T14:22:44 *** vivekk_ has joined #rtems 2016-08-17T14:22:55 https://devel.rtems.org/newticket 2016-08-17T14:23:06 this is how we keep track of new features and bug fixes 2016-08-17T14:23:18 we use the mailing list also to post patches of new development and to discuss the same 2016-08-17T14:25:04 ok _sambeet please do check your scripts with chris, and start looking at how to create some sample apps to test your cross-compiled libraries 2016-08-17T14:25:22 because without testing them in isolation it is quite hard to believe you could combine them all together for RTT quite easily 2016-08-17T14:25:31 also this should be an easy bit of code to create and contribute 2016-08-17T14:25:38 <_sambeet> I will provide RTEMS application examples for boost, omniorb and libxml and will file a ticket for RSB recipes 2016-08-17T14:25:38 *** vivekk has quit IRC 2016-08-17T14:25:43 excellent. 2016-08-17T14:25:56 we'll move on to mudit1729 then, hi mudit1729 2016-08-17T14:26:01 Hi 2016-08-17T14:26:06 <_sambeet> Thank You Sir 2016-08-17T14:27:04 Do I tell regarding the deliverables that I would be updating in the group by the August 23rd ? 2016-08-17T14:27:29 DMA : 1. Patch in Mainline 2016-08-17T14:27:50 "Mainline"? 2016-08-17T14:27:53 2. Patch in libbsd [ Required by SD card driver ] 2016-08-17T14:28:04 Did your DMA patch get merged into rtems.git 2016-08-17T14:28:14 nope 2016-08-17T14:28:48 ok. just got a patch prepared. 2016-08-17T14:28:55 yes. 2016-08-17T14:28:57 was not sure what you meant by mainline. please, continue 2016-08-17T14:29:35 3. Blog Posts regarding understanding DMA in RPi, present implementation of the API, and usage of the same 2016-08-17T14:29:50 *** vivekk_ has quit IRC 2016-08-17T14:30:38 4. Patch for extending Mailbox API [ Presently with the previous method as discussed in the mail. ] [ Will do a refactor of the code after GSOC ] 2016-08-17T14:31:07 good. also prepare your submission link, which can be a blog post. _sambeet has sent me his, which is a good example: http://rocktortems.blogspot.in/2016/08/gsoc-final-report-this-post-would-serve.html 2016-08-17T14:31:33 yes sure 2016-08-17T14:31:51 note that links to code from there must only be for code YOU wrote. 2016-08-17T14:32:05 ditto for other students ^ 2016-08-17T14:32:19 5. blogpost regarding the Mailbox interface in Rpi and present plans and imeplementation of the same in RTEMS 2016-08-17T14:32:28 i think refactoring that code will be nice "back-burner" activity for you. 2016-08-17T14:32:48 i'm a fan of reducing copy-paste-search-replace :0 2016-08-17T14:33:19 yes, That is precisely why I initiated the discussion on this. 2016-08-17T14:33:47 6.Blog Post regarding porting the driver to libbsd 2016-08-17T14:34:17 7. Clean Implementation for the SD card driver that I have done [ A patch if the code gets to a working state ] 2016-08-17T14:34:28 Would all these be fine ? 2016-08-17T14:34:56 yes 2016-08-17T14:35:20 you should make a patch for #7 anyway as part of your official submission, even if it is not quite mergeable 2016-08-17T14:35:29 *** vivekk has joined #rtems 2016-08-17T14:35:31 okay sure. 2016-08-17T14:35:44 sounds great mudit1729 2016-08-17T14:35:49 Thanks gedare 2016-08-17T14:36:05 That's all from my end 2016-08-17T14:37:44 thanks. ok vivekk would you like to go? 2016-08-17T14:38:29 Hi Gedare 2016-08-17T14:38:51 This week I modified the fileio and capture tests to start NFS client for transporting the traces. For function tracing I have the traces on host now. I'm writing babeltrace tests and will start testing CTF today. 2016-08-17T14:39:11 For user extensions, I modified the ctrace command to output CTF trace to the shared dir but while running the capture.exe test, traces for some libbsd tasks are also captured while tracing 'test1'. 2016-08-17T14:39:27 I'm looking into this now and refining the capture engine code, since writing trace to a file each time is costly. 2016-08-17T14:39:55 Meanwhile i've shared my changes on git and updated my blog. I'll look at setting up serial transport next if time permits. 2016-08-17T14:41:06 ok. how did you define the CTF configuration? 2016-08-17T14:41:51 Awesome! 2016-08-17T14:42:00 Have you attempted to visualize any logs? 2016-08-17T14:42:11 I'm not sure what you mean by configuration. I have created different metadata for function tracing and user extensions. 2016-08-17T14:42:19 @Joel Will do it today 2016-08-17T14:42:19 vivekk: Error: "Joel" is not a valid command. 2016-08-17T14:42:23 do you have something written about how you decided to package the CTF data structures, and do you provide yaml files for the structures that are traced? 2016-08-17T14:42:47 vivekk: very cool! a cool visualization has been the big goal. :) 2016-08-17T14:42:49 so that the CTF traces from RTEMS can be used in other tools like babeltrace etc 2016-08-17T14:43:32 For definining data structures we are using the rtems-tld configuration itself. 2016-08-17T14:44:03 from a reproducibility and maintenance perspective, it is very important to understand the choices that were made in creating the CTF. if it is 1:1 from the rtems-tld then the process for making it should be easy to explain, but still it must be documented 2016-08-17T14:44:10 It produces relevant data stuctures in the temp C file(for finding sizes) and the metadata 2016-08-17T14:44:20 do you understand my perspective? 2016-08-17T14:44:38 Yes 2016-08-17T14:44:40 ok 2016-08-17T14:45:17 You want to move the process as far from magician level to random schmuck as you can :) 2016-08-17T14:46:09 It needs to be reproducible. It will take a skilled person first to try because no one's instructions are perfect. But that "can it be reproduced?" step is critical. 2016-08-17T14:48:01 ok thanks vivekk, good job making progress since midterm 2016-08-17T14:48:19 Yes. At this stage tackling data structures is a bit tedious since Chris said libDWARF will provide this feature later. I'll update my blog with this info too 2016-08-17T14:48:21 Thanks 2016-08-17T14:48:23 salpha you can go now 2016-08-17T14:48:48 this week i wrapped up my achievements about writing dl apps. 2016-08-17T14:49:00 i updated the blog, the wiki , and the repo 2016-08-17T14:49:30 i tried to build the testsuite via omk, but got an error and have posted it to the mailing list 2016-08-17T14:49:54 then i tried to write a network app 2016-08-17T14:50:14 making network-demos out-of-the-box, ended with this error: 2016-08-17T14:50:23 o-optimize/init.o: error adding symbols: File in wrong format 2016-08-17T14:50:23 collect2: error: ld returned 1 exit status 2016-08-17T14:50:44 --- 2016-08-17T14:50:45 o-optimize/init.o: Relocations in generic ELF (EM: 2) 2016-08-17T14:50:45 o-optimize/init.o: error adding symbols: File in wrong format 2016-08-17T14:50:45 collect2: error: ld returned 1 exit status 2016-08-17T14:51:15 and when i tried to write a net app myself, using FXP driver, got the following error: 2016-08-17T14:51:35 librtemsbsp.a(libnetchip_a-if_fxp.o): In function `fxpIsOn': 2016-08-17T14:51:35 collect2: error: ld returned 1 exit status 2016-08-17T14:51:45 if_fxp.c:436: undefined reference to `BSP_irq_enabled_at_i8259s 2016-08-17T14:51:58 see if that function was removed 2016-08-17T14:52:21 Pavel recently tried to sweep those out I think 2016-08-17T14:52:21 are you building these with dl? 2016-08-17T14:52:30 did you --enable-networking 2016-08-17T14:52:37 The object file format issues could be from mixing objects from different architectures or builds 2016-08-17T14:52:40 send / write a more detailed account of what you did and what went wrong 2016-08-17T14:53:11 not building theses with dl. 2016-08-17T14:53:22 i double checked, yes with --enable-networking 2016-08-17T14:53:37 ok 2016-08-17T14:53:55 okay i'll send to the mailing list 2016-08-17T14:53:58 if you can reproduce that a clean RSB-built toolchain and RTEMS master does not build the network-demos, that should be reported. 2016-08-17T14:54:20 regarding mixing objs from different arch, i didn't modify network-demos 2016-08-17T14:54:25 just cloned and tried to build 2016-08-17T14:54:37 could there anything be wrong with my env? 2016-08-17T14:54:46 build env i mean 2016-08-17T14:55:34 gedare: yes, BSP_irq_enabled_at_i8259s is only defined for MIPS 2016-08-17T14:55:51 It would take a look at the entire build to be sure. My suggestion was just one I have seen in the past. 2016-08-17T14:55:53 i just grepped in the three 2016-08-17T14:56:03 salpha: and it probably needs to be removed from there. :) 2016-08-17T14:56:15 *tree 2016-08-17T14:57:18 i saw that pavel suggested you might want to use waf 2016-08-17T14:57:43 for dl or in general? 2016-08-17T14:57:49 in general 2016-08-17T14:58:00 since there is more support in the community. only pavel's group uses omk 2016-08-17T14:58:02 *** vivekk has quit IRC 2016-08-17T14:58:18 it is better if you can improve the waf methods we have 2016-08-17T14:58:28 yh that's right but you said use something to make progress two weeks back 2016-08-17T14:58:32 yeah 2016-08-17T14:58:35 *** m-ric has joined #rtems 2016-08-17T14:58:52 i meant, if you can't get past your omk error. you should also work on the waf approach in the side 2016-08-17T14:59:10 by the way, there is a bit of glue somewhere that determines whether RTEMS application uses main() or Init() as the entry point 2016-08-17T14:59:13 okay so this week i'll try to fix the issue of building DL apps via WAF 2016-08-17T14:59:21 that is probably the reason OMK did not work 2016-08-17T14:59:58 so you mean if i change Init to main should be fixed? 2016-08-17T15:00:07 I saw the email and haven't gotten to reply yet. Your application does not have its own RTEMS configuration and is getting the one from cpukit/libmisc/dummy. This sets some useful defaults and arranges for the program's entry point to be main. 2016-08-17T15:00:34 The question is whether or not the application you are linking WANTS to use the dummy configuration or provide its own 2016-08-17T15:00:42 but it has its own rtems conf 2016-08-17T15:01:02 #define CONFIGURE_*_* you mean, right? 2016-08-17T15:01:28 i suspect your sample does not use the right configure 2016-08-17T15:01:31 CONFIGURE options 2016-08-17T15:01:35 Does it have #define CONFIGURE_INIT and end all of that block by including 2016-08-17T15:01:37 of course i didn't intend to use dummy conf. i was unaware of this. 2016-08-17T15:01:41 the error is pulling in libmisc/dummy/default_configuration 2016-08-17T15:01:51 oh, i see DrJoel found the samet hing :0 2016-08-17T15:01:54 *reads back* 2016-08-17T15:02:12 p.s. one of you should respond to the email on the ml thread to report this is the error 2016-08-17T15:02:17 Post the code and let's see what is missing. Sometimes if you miss one configuration you have a configuration dependency that is satisfied by the default. 2016-08-17T15:02:19 Post the code 2016-08-17T15:02:41 okay 2016-08-17T15:02:46 i have some pointers now 2016-08-17T15:03:01 i'll try and if fixed, post the result back 2016-08-17T15:03:53 I quickly posted some info 2016-08-17T15:04:02 okay i have CONFIGURE_INIT 2016-08-17T15:04:08 on the first line 2016-08-17T15:04:17 salpha: do you have a document somewhere explaining how crash reports are generated/captured by slingshot? 2016-08-17T15:04:50 and the thing is that it build successfully with rtems makefile 2016-08-17T15:04:57 only omk is a problem 2016-08-17T15:06:06 gedare: yes. http://rtems-fi.blogspot.com/2016/06/how-to-handle-failure-of-individual.html 2016-08-17T15:06:52 it only relies on the console output? 2016-08-17T15:07:13 currently slingshot doesn't store the report on the DB. this is a TODO. 2016-08-17T15:07:49 console output is enough to see whether test was: 1. successful, 2. timed-out 3. crashed 2016-08-17T15:07:49 for some reason, i thought there was an option included to use a mechanism to get crash data out of gdb 2016-08-17T15:08:12 ok 2016-08-17T15:08:31 i dunno what you mean by getting crash data out of gdb 2016-08-17T15:08:35 nevermind 2016-08-17T15:08:40 okay :) 2016-08-17T15:08:57 so, figure out the problem with OMK building your sample... 2016-08-17T15:09:00 so as i said, i'll work on using WAF for DL 2016-08-17T15:09:12 good 2016-08-17T15:09:14 for OMK, i'll try to reach pavel 2016-08-17T15:09:19 if you need help just ask 2016-08-17T15:09:24 it's more helpful if i chat with him 2016-08-17T15:09:40 yeah 2016-08-17T15:09:49 ping your emaila bout waf dlopen failed 2016-08-17T15:10:09 okay. i'll ping again. 2016-08-17T15:11:00 ah i saw pavel's reply now 2016-08-17T15:11:17 so i'll try to port test suite from cpp to c 2016-08-17T15:11:36 it's not difficult. just wanted to make sure how pavel thinks before doing so. 2016-08-17T15:12:02 for some reason i guess it would solve the problem 2016-08-17T15:12:32 ok 2016-08-17T15:13:36 thanks salpha. i won't be able to meet weekly after this on IRC very easily 2016-08-17T15:13:50 so provide weekly updates by email to me, joel, and pavel at least for now 2016-08-17T15:13:56 okay i'll send updates via email 2016-08-17T15:13:58 and chris johns too 2016-08-17T15:14:03 thanks too 2016-08-17T15:14:05 and we'll schedule irc meetings as needed 2016-08-17T15:14:15 okay 2016-08-17T15:14:25 ok. i think that is everyone. remember to prepare your final submissions for GSoC 2016-08-17T15:21:31 *** DrJoel has quit IRC 2016-08-17T15:35:15 *** salpha has quit IRC 2016-08-17T15:41:32 *** dougk has joined #rtems 2016-08-17T16:05:49 *** benjamint has quit IRC 2016-08-17T17:25:33 *** Davidbrcz has joined #rtems 2016-08-17T17:32:43 *** dr__house|away is now known as dr__house 2016-08-17T17:47:47 *** ita|zzz is now known as ita 2016-08-17T18:25:23 *** monstr has quit IRC 2016-08-17T18:28:43 *** benjamint has joined #rtems 2016-08-17T19:44:19 *** dougk has quit IRC 2016-08-17T19:53:28 *** benjamint has quit IRC 2016-08-17T19:58:08 *** dougk has joined #rtems 2016-08-17T20:03:49 *** Davidbrcz has quit IRC 2016-08-17T20:18:04 *** Davidbrcz has joined #rtems 2016-08-17T21:14:25 *** m-ric has quit IRC 2016-08-17T21:37:44 *** gedare has quit IRC 2016-08-17T21:50:46 *** Davidbrcz has quit IRC 2016-08-17T22:45:39 *** gedare has joined #rtems 2016-08-17T22:45:39 *** ChanServ sets mode: +o gedare 2016-08-17T22:50:07 *** gedare has quit IRC 2016-08-18T00:24:47 *** dr__house is now known as dr__house|away 2016-08-18T00:29:15 *** gedare has joined #rtems 2016-08-18T00:29:15 *** ChanServ sets mode: +o gedare 2016-08-18T00:34:48 *** gedare has quit IRC 2016-08-18T01:16:31 *** kelbit has joined #rtems 2016-08-18T01:17:04 quick build question if anyone has a minute 2016-08-18T01:17:31 i'm using the source builder to try and build the latest BSP for the Texas Instruments TMS570 2016-08-18T01:19:02 i was under the impression that the active development branch is 4.11, but sourcebuilder is just showing me 4.9, 4.10, and 4.12: 2016-08-18T01:19:13 http://imgur.com/a/3ju20 2016-08-18T01:19:46 i wouldn't even think there would be a 4.12 yet? 2016-08-18T03:11:14 *** _sambeet has quit IRC 2016-08-18T03:57:57 *** mudit1729 has quit IRC 2016-08-18T04:24:56 [git] 1676b9c by Chris Johns: [rtemstoolkit: Trace opening a macro file.] http://devel.rtems.org/changeset/1676b9c/rtems-tools 2016-08-18T04:24:56 [git] 57e4172 by Chris Johns: [tester: handle compile argument warnings.] http://devel.rtems.org/changeset/57e4172/rtems-tools 2016-08-18T05:29:08 [git] 9c42752 by Sebastian Huber: [score: Fix undefined behaviour Cast POSIX error codes to unsigned int to avoid undefined behaviour in case of PTHREAD_BARRIER_SERIAL_THREAD which is -1.] http://devel.rtems.org/changeset/9c42752/rtems 2016-08-18T05:29:08 [git] 5d1fc66 by Sebastian Huber: [psxtests: Adjust sporadic server tests According to POSIX priority value returned from pthread_getschedparam() shall be the value specified by the most recent pthread_setschedparam(), pthread_setschedprio(), or pthread_create() call affecting the target thread. Read this as though a temporary lower priority due to the 2016-08-18T05:29:08 sporadic server policy shall not...] http://devel.rtems.org/changeset/5d1fc66/rtems 2016-08-18T05:38:54 *** monstr has joined #rtems 2016-08-18T05:55:23 *** kiwichri_ has joined #rtems 2016-08-18T05:57:03 sebhub, hi 2016-08-18T05:57:10 hi 2016-08-18T05:57:37 Why do we have altcycv_devkit and altcycv_devkit_smp BSPs? 2016-08-18T05:58:12 they don't use the autoconf generated linker command files 2016-08-18T05:58:48 we had these variants for the zynq as well 2016-08-18T05:59:30 So the only difference is the linker command files? 2016-08-18T05:59:50 as far as I remember 2016-08-18T06:00:13 Why not use the SMP autoconf var to select the linker command file? 2016-08-18T06:00:39 it works as is and you need time to change it 2016-08-18T06:00:50 so the reason is lack of time 2016-08-18T06:02:21 The other side of this is the complexity it adds to the project to maintain this. We need to have separate BSPs with separate configure options. I am not sure if the --enable-smp option is clearly documented and if adding --enable-smp to altcycv_devkit clearly fails with a suitable user level error message. 2016-08-18T06:03:09 the other side is we should think about this once we have a new build system 2016-08-18T06:03:45 we can think about this now, but I am very reluctant to change this in the autoconf stuff 2016-08-18T06:04:08 We have to release 4.11 and then 4.12 and 4.12 will stay about for a long time. Amar and I work in the server back side of the project and these choices create a lot of work. 2016-08-18T06:04:43 So I appreciate the time it requires and also now awful autoconf is to work with but .... :) 2016-08-18T06:04:59 yes, I know, and its not that I am in a hurry 2016-08-18T06:05:31 I was not suggesting this, we are all time poor and need to focus. 2016-08-18T06:06:03 I have added new support to the bsp builder tool to manage this. It is just going to look strange when reviewing the configuration. 2016-08-18T06:06:24 ie you have 2 bsps which differ only by --enable-smp. 2016-08-18T06:06:28 the altcycv_devkit would work with smp enabled, but limits you to use one processor 2016-08-18T06:07:05 it was one of the first bsps supporting smp, during that time it made sense to have two different bsps installed 2016-08-18T06:07:11 Should it be built with --enable-smp or should smp be excluded? 2016-08-18T06:07:13 now two years later things may have changed 2016-08-18T06:07:31 I understand, I just need to know how to handle it. 2016-08-18T06:08:05 the linker command files adjusted by --enable-smp is the right thing to do from my point of view 2016-08-18T06:08:36 or change the ARM not use the linker command file for memory allocation, however, this is a lot of work 2016-08-18T06:08:47 Yeap on both counts 2016-08-18T06:09:25 Which ARM bsps support SMP, zynq, atlcycv, any others? 2016-08-18T06:09:33 the realview 2016-08-18T06:09:39 OK 2016-08-18T06:11:49 which bsps do not support the legacy networking stack? 2016-08-18T06:12:03 I do not know the lm or lpc etc ones 2016-08-18T06:12:37 I added the lm for testing on qemu, not sure what it supports now 2016-08-18T06:12:44 the lpc fully support the old stack 2016-08-18T06:12:57 Which ones should I exclude? 2016-08-18T06:12:59 the realview and altera don't support it 2016-08-18T06:13:31 the provide no drivers 2016-08-18T06:13:42 I use the realview for testing with network enabled 2016-08-18T06:14:03 some tests work with the loop back interface 2016-08-18T06:14:11 The zynq does but you need special drivers based on the XIlinx BSP code which cannot be merged 2016-08-18T06:48:24 [trac] #2778/enhancement (v:4.11) created by Sambeet (Error building RTEMS Source Builder recipe for libxml) http://devel.rtems.org/ticket/2778 2016-08-18T06:53:06 [trac] libxml2-2.7.8.cfg (The build configuration file that has the adress of the config file) attached to #2778 by Sambeet http://devel.rtems.org/ticket/2778 2016-08-18T06:54:15 *** ppisa has joined #rtems 2016-08-18T06:57:12 [git] fea392a by Alexander Krutwig: [bsp/atsam: Add timeout to QSPI send command] http://devel.rtems.org/changeset/fea392a/rtems 2016-08-18T07:11:12 *** kiwichri_ has quit IRC 2016-08-18T07:11:53 *** kiwichri_ has joined #rtems 2016-08-18T09:32:56 *** benjamint has joined #rtems 2016-08-18T10:07:23 *** benjamint has quit IRC 2016-08-18T10:36:29 *** kiwichri_ has quit IRC 2016-08-18T10:37:08 *** kiwichri_ has joined #rtems 2016-08-18T12:50:27 *** ppisa has quit IRC 2016-08-18T13:16:57 *** monstr has quit IRC 2016-08-18T14:31:48 *** gedare has joined #rtems 2016-08-18T14:31:49 *** ChanServ sets mode: +o gedare 2016-08-18T14:50:46 *** gedare has quit IRC 2016-08-18T14:55:34 *** jkridner has joined #rtems 2016-08-18T16:17:13 *** gedare has joined #rtems 2016-08-18T16:17:13 *** ChanServ sets mode: +o gedare 2016-08-18T16:29:56 *** amraw has joined #rtems 2016-08-18T16:52:31 *** dr__house|away is now known as dr__house 2016-08-18T16:54:55 *** gedare has quit IRC 2016-08-18T17:19:38 *** monstr has joined #rtems 2016-08-18T17:29:24 *** jkridner has quit IRC 2016-08-18T18:04:19 *** kiwichri_ has quit IRC 2016-08-18T18:04:49 *** Davidbrcz has joined #rtems 2016-08-18T18:05:21 *** kiwichri_ has joined #rtems 2016-08-18T18:17:54 *** Davidbrcz has quit IRC 2016-08-18T18:32:09 *** jkridner has joined #rtems 2016-08-18T18:32:31 *** Davidbrcz has joined #rtems 2016-08-18T18:33:11 *** amraw has quit IRC 2016-08-18T18:36:28 *** monstr has quit IRC 2016-08-18T18:54:45 *** gedare has joined #rtems 2016-08-18T18:54:46 *** ChanServ sets mode: +o gedare 2016-08-18T18:58:51 *** gedare has quit IRC 2016-08-18T19:06:21 *** kiwichri_ has quit IRC 2016-08-18T19:06:59 *** kiwichri_ has joined #rtems 2016-08-18T19:10:27 *** jkridner has quit IRC 2016-08-18T19:14:55 *** jkridner has joined #rtems 2016-08-18T20:11:21 *** ita_ has joined #rtems 2016-08-18T20:13:17 *** ita has quit IRC 2016-08-18T21:46:03 *** kiwichri_ has quit IRC 2016-08-18T21:46:56 *** kiwichri_ has joined #rtems 2016-08-18T21:51:42 *** gedare has joined #rtems 2016-08-18T21:51:42 *** ChanServ sets mode: +o gedare 2016-08-18T22:02:43 *** gedare has quit IRC 2016-08-18T22:19:27 *** jkridner has quit IRC 2016-08-18T22:26:06 *** Davidbrcz has quit IRC 2016-08-18T23:18:04 *** dr__house is now known as dr__house|away 2016-08-18T23:55:18 [git] 51e19af by Chris Johns: [bsp-builder: Support per BSP excludes.] http://devel.rtems.org/changeset/51e19af/rtems-tools 2016-08-18T23:55:18 [git] 3a92a54 by Chris Johns: [bsp-builder: Add ARM bsps.] http://devel.rtems.org/changeset/3a92a54/rtems-tools 2016-08-18T23:55:18 [git] 9a1daba by Chris Johns: [bsp-builder: Fix results report columns.] http://devel.rtems.org/changeset/9a1daba/rtems-tools 2016-08-19T00:03:00 *** kiwichri_ has quit IRC 2016-08-19T00:03:32 *** kiwichri_ has joined #rtems 2016-08-19T00:21:02 *** kiwichr__ has joined #rtems 2016-08-19T00:21:29 *** kiwichri_ has quit IRC 2016-08-19T00:35:00 *** kiwichr__ has quit IRC 2016-08-19T00:35:43 *** kiwichri_ has joined #rtems 2016-08-19T01:04:54 *** kiwichri_ has quit IRC 2016-08-19T01:06:13 *** kiwichri_ has joined #rtems 2016-08-19T02:36:04 *** kiwichri_ has quit IRC 2016-08-19T02:37:04 *** kiwichri_ has joined #rtems 2016-08-19T03:02:55 *** kiwichri_ has quit IRC 2016-08-19T05:34:48 *** monstr has joined #rtems 2016-08-19T05:40:57 [git] 36fad91 by Kevin Kirspel: [arm: Add VFP context validate support for ARMv5] http://devel.rtems.org/changeset/36fad91/rtems 2016-08-19T07:07:40 *** gigetoo has quit IRC 2016-08-19T07:39:09 *** jkridner has joined #rtems 2016-08-19T07:42:18 *** gigetoo has joined #rtems 2016-08-19T07:44:28 *** jkridner has quit IRC 2016-08-19T07:57:07 *** seadog007 has joined #rtems 2016-08-19T09:19:19 [git] a971614 by Sebastian Huber: [doc: Update rules to modify FreeBSD code] http://devel.rtems.org/changeset/a971614/rtems-libbsd 2016-08-19T09:59:23 *** benjamint has joined #rtems 2016-08-19T10:03:08 *** seadog007 has quit IRC 2016-08-19T13:00:53 *** benjamint has quit IRC 2016-08-19T13:01:21 *** benjamint has joined #rtems 2016-08-19T13:11:31 *** jkridner has joined #rtems 2016-08-19T13:21:30 *** MiD has joined #rtems 2016-08-19T13:26:44 hi, everyone! Anybody here? I need some help in rtems interrupt for stm32. Thx. PS Sorry for my English 2016-08-19T13:27:33 *** jkridner has quit IRC 2016-08-19T13:32:43 *** jkridner has joined #rtems 2016-08-19T13:34:54 *** benjamint has quit IRC 2016-08-19T13:44:16 *** monstr has quit IRC 2016-08-19T13:49:52 *** jkridner has quit IRC 2016-08-19T13:53:02 *** sebhub has quit IRC 2016-08-19T13:53:47 *** MiD has quit IRC 2016-08-19T13:54:28 *** jkridner has joined #rtems 2016-08-19T14:39:52 *** danieli has quit IRC 2016-08-19T14:51:31 *** danieli has joined #rtems 2016-08-19T16:43:16 *** Davidbrcz has joined #rtems 2016-08-19T16:53:34 *** Davidbrcz has quit IRC 2016-08-19T16:57:49 *** gedare has joined #rtems 2016-08-19T16:57:49 *** ChanServ sets mode: +o gedare 2016-08-19T17:08:05 *** Davidbrcz has joined #rtems 2016-08-19T18:05:14 *** bdiopxv has quit IRC 2016-08-19T18:10:12 *** gedare has quit IRC 2016-08-19T18:24:00 *** gedare has joined #rtems 2016-08-19T18:24:00 *** ChanServ sets mode: +o gedare 2016-08-19T18:52:12 *** gedare has quit IRC 2016-08-19T19:07:38 *** gedare has joined #rtems 2016-08-19T19:07:38 *** ChanServ sets mode: +o gedare 2016-08-19T19:51:58 *** danieli has quit IRC 2016-08-19T19:51:58 *** danieli has joined #rtems 2016-08-19T20:24:09 *** gedare has quit IRC 2016-08-19T21:02:07 *** Davidbrcz has quit IRC 2016-08-19T21:17:20 *** ita_ is now known as itazzz 2016-08-19T21:32:10 *** gedare has joined #rtems 2016-08-19T21:32:10 *** ChanServ sets mode: +o gedare 2016-08-19T21:48:27 *** gedare has quit IRC 2016-08-19T22:21:16 *** gedare has joined #rtems 2016-08-19T22:21:17 *** ChanServ sets mode: +o gedare 2016-08-19T22:29:19 *** gedare has quit IRC 2016-08-20T01:34:09 *** davee_ has joined #rtems 2016-08-20T05:51:49 *** amraw has joined #rtems 2016-08-20T06:50:00 *** card has joined #rtems 2016-08-20T06:50:05 *** itazzz_ has joined #rtems 2016-08-20T06:50:08 *** dr__hous1|away has joined #rtems 2016-08-20T06:50:19 *** geheimni1` has joined #rtems 2016-08-20T06:51:16 *** bbhoss_ has joined #rtems 2016-08-20T06:54:37 *** itazzz has quit IRC 2016-08-20T06:54:37 *** bbhoss has quit IRC 2016-08-20T06:54:37 *** geheimnis` has quit IRC 2016-08-20T06:54:38 *** dr__house|away has quit IRC 2016-08-20T06:54:38 *** verm__ has quit IRC 2016-08-20T06:54:42 *** geheimni1` is now known as geheimnis` 2016-08-20T06:57:52 *** bbhoss_ is now known as bbhoss 2016-08-20T06:58:28 *** jkridner has quit IRC 2016-08-20T06:58:57 *** jkridner has joined #rtems 2016-08-20T07:55:37 [trac] 0001-Adding-libxml-package.patch (Patch to add libxml bset) attached to #2778 by Sambeet http://devel.rtems.org/ticket/2778 2016-08-20T07:56:24 [trac] 0002-Changes-for-libxml.bset.patch (Changes in the build set) attached to #2778 by Sambeet http://devel.rtems.org/ticket/2778 2016-08-20T07:57:32 [trac] 0003-changes-to-resolve-config-file-not-found-error.patch (change sto resolve the .cfg file error) attached to #2778 by Sambeet http://devel.rtems.org/ticket/2778 2016-08-20T07:58:36 [trac] 0004-Added-the-.cfg-file.patch (Changes in the .cfg file) attached to #2778 by Sambeet http://devel.rtems.org/ticket/2778 2016-08-20T08:04:44 [trac] rsb-report-libxml2-2.7.8-2.txt (The error report) attached to #2778 by Sambeet http://devel.rtems.org/ticket/2778 2016-08-20T08:12:31 [trac] #2778/enhancement (assigned) updated by Sambeet (There are a few more attachments for clarity.I have added the patches for the build ...) http://devel.rtems.org/ticket/2778 2016-08-20T08:17:22 *** benjamint has joined #rtems 2016-08-20T08:18:31 *** Davidbrcz has joined #rtems 2016-08-20T08:29:43 *** benjamint has quit IRC 2016-08-20T08:29:49 *** Davidbrcz has quit IRC 2016-08-20T08:44:04 *** Davidbrcz has joined #rtems 2016-08-20T09:13:13 *** amraw has quit IRC 2016-08-20T09:46:13 *** itazzz_ has quit IRC 2016-08-20T10:18:33 *** amraw has joined #rtems 2016-08-20T11:36:06 *** Wonjun__ has joined #rtems 2016-08-20T11:38:07 *** Wonjun has joined #rtems 2016-08-20T11:39:49 *** Wonjun_ has quit IRC 2016-08-20T11:41:16 *** Wonjun__ has quit IRC 2016-08-20T11:57:12 *** davee_ has quit IRC 2016-08-20T12:23:13 *** amraw has quit IRC 2016-08-20T13:03:24 *** Davidbrcz has quit IRC 2016-08-20T13:06:32 *** amraw has joined #rtems 2016-08-20T15:13:13 *** amraw has quit IRC 2016-08-20T15:40:10 *** Davidbrcz has joined #rtems 2016-08-20T15:49:20 *** Davidbrcz has quit IRC 2016-08-20T20:05:28 *** mumptai has joined #rtems 2016-08-20T20:21:27 *** davee_ has joined #rtems 2016-08-20T20:23:56 *** davee_ has quit IRC 2016-08-20T22:03:21 *** geheimnis` has quit IRC 2016-08-20T22:05:24 *** geheimnis` has joined #rtems 2016-08-21T00:06:24 *** gedare has joined #rtems 2016-08-21T00:06:24 *** ChanServ sets mode: +o gedare 2016-08-21T00:12:54 *** gedare has quit IRC 2016-08-21T01:52:52 *** mumptai has quit IRC 2016-08-21T02:05:31 *** mumptai has joined #rtems 2016-08-21T02:58:12 *** edwardk has quit IRC 2016-08-21T02:59:11 *** edwardk has joined #rtems 2016-08-21T03:58:34 *** guillaum1 has quit IRC 2016-08-21T04:13:32 *** guillaum1 has joined #rtems 2016-08-21T05:10:16 *** amraw has joined #rtems 2016-08-21T06:26:40 *** guillaum1 has quit IRC 2016-08-21T06:41:29 *** guillaum1 has joined #rtems 2016-08-21T07:23:13 *** amraw has quit IRC 2016-08-21T07:46:31 *** Davidbrcz has joined #rtems 2016-08-21T07:52:44 *** Davidbrcz has quit IRC 2016-08-21T08:07:34 *** Davidbrcz has joined #rtems 2016-08-21T11:01:40 *** ita has joined #rtems 2016-08-21T11:03:44 *** jkridner has quit IRC 2016-08-21T11:03:51 *** jkridner|pd has joined #rtems 2016-08-21T11:34:14 *** amraw has joined #rtems 2016-08-21T13:43:13 *** amraw has quit IRC 2016-08-21T17:41:31 *** Davidbrcz has quit IRC 2016-08-21T18:31:00 *** Davidbrcz has joined #rtems 2016-08-21T20:00:43 *** gigetoo has quit IRC 2016-08-21T20:01:07 *** gigetoo has joined #rtems 2016-08-21T21:14:49 *** Davidbrcz has quit IRC 2016-08-21T21:47:48 *** mumptai has quit IRC