diff -Naur binutils-2.23.51-1.orig/gas/ChangeLog binutils-2.23.51-1/gas/ChangeLog
--- binutils-2.23.51-1.orig/gas/ChangeLog	2013-03-09 23:06:40.000000000 +0100
+++ binutils-2.23.51-1/gas/ChangeLog	2013-06-04 08:42:37.375525383 +0200
@@ -1,3 +1,22 @@
+2013-03-14  Andreas Schwab  <schwab@suse.de>
+
+	* doc/c-arc.texi (ARC Directives): Revert last change and use
+	@itemize instead of @table.
+	* doc/c-arm.texi (ARM-Instruction-Set): Likewise.
+
+2013-03-14  Nick Clifton  <nickc@redhat.com>
+
+	PR gas/15212
+	* doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
+	for table format.
+	* doc/c-arm.texi (ARM-Instruction-Set): Likewise.  Also add text
+	to the @item directives.
+	(ARM-Neon-Alignment): Move to correct place in the document.
+	* doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
+	formatting.
+	* doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
+	@smallexample.
+
 2013-03-08  Chung-Lin Tang  <cltang@codesourcery.com>
 
 	* write.h (struct fix): Add fx_dot_frag field.
@@ -33,7 +52,7 @@
 2013-02-28  H.J. Lu  <hongjiu.lu@intel.com>
 
 	* config/tc-i386.c (_i386_insn): Add rep_prefix.
-	(md_assemble): Check if REP prefix is OK. 
+	(md_assemble): Check if REP prefix is OK.
 	(parse_insn): Remove expecting_string_instruction.  Set
 	i.rep_prefix.
 
diff -Naur binutils-2.23.51-1.orig/gas/doc/c-arc.texi binutils-2.23.51-1/gas/doc/c-arc.texi
--- binutils-2.23.51-1.orig/gas/doc/c-arc.texi	2013-01-16 16:20:11.000000000 +0100
+++ binutils-2.23.51-1/gas/doc/c-arc.texi	2013-06-04 08:42:37.375525383 +0200
@@ -1,4 +1,4 @@
-@c Copyright 2000, 2001, 2005, 2006, 2007, 2011 Free Software Foundation, Inc.
+@c Copyright 2000-2013 Free Software Foundation, Inc.
 @c This is part of the GAS manual.
 @c For copying conditions, see the file as.texinfo.
 
@@ -220,7 +220,7 @@
 encodings for use of these instructions according to the specification
 by the user.  The parameters are:
 
-@table @bullet
+@itemize @bullet
 @item @var{name}
 Name of the extension instruction
 
@@ -279,7 +279,7 @@
 with SYNTAX_20P.
 
 @end itemize
-@end table
+@end itemize
 
 For example, defining 64-bit multiplier with immediate operands:
 
diff -Naur binutils-2.23.51-1.orig/gas/doc/c-arm.texi binutils-2.23.51-1/gas/doc/c-arm.texi
--- binutils-2.23.51-1.orig/gas/doc/c-arm.texi	2013-03-06 17:33:09.000000000 +0100
+++ binutils-2.23.51-1/gas/doc/c-arm.texi	2013-06-04 08:42:37.375525383 +0200
@@ -1,5 +1,4 @@
-@c Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
-@c 2006, 2007, 2008, 2009, 2010, 2011  Free Software Foundation, Inc.
+@c Copyright 1996-2013 Free Software Foundation, Inc.
 @c This is part of the GAS manual.
 @c For copying conditions, see the file as.texinfo.
 
@@ -390,7 +389,7 @@
 @code{unified} syntax, which can be selected via the @code{.syntax}
 directive, and has the following main features:
 
-@table @bullet
+@itemize @bullet
 @item
 Immediate operands do not require a @code{#} prefix.
 
@@ -415,7 +414,7 @@
 @item
 All instructions set the flags if and only if they have an @code{s}
 affix.
-@end table
+@end itemize
 
 @node ARM-Chars
 @subsection Special Characters
@@ -451,28 +450,6 @@
 @cindex register names, ARM
 *TODO* Explain about ARM register naming, and the predefined names.
 
-@node ARM-Neon-Alignment
-@subsection NEON Alignment Specifiers
-
-@cindex alignment for NEON instructions
-Some NEON load/store instructions allow an optional address
-alignment qualifier.
-The ARM documentation specifies that this is indicated by
-@samp{@@ @var{align}}. However GAS already interprets
-the @samp{@@} character as a "line comment" start,
-so @samp{: @var{align}} is used instead.  For example:
-
-@smallexample
-        vld1.8 @{q0@}, [r0, :128]
-@end smallexample
-
-@node ARM Floating Point
-@section Floating Point
-
-@cindex floating point, ARM (@sc{ieee})
-@cindex ARM floating point (@sc{ieee})
-The ARM family uses @sc{ieee} floating-point numbers.
-
 @node ARM-Relocations
 @subsection ARM relocation generation
 
@@ -519,6 +496,28 @@
         MOVT r0, #:upper16:foo
 @end smallexample
 
+@node ARM-Neon-Alignment
+@subsection NEON Alignment Specifiers
+
+@cindex alignment for NEON instructions
+Some NEON load/store instructions allow an optional address
+alignment qualifier.
+The ARM documentation specifies that this is indicated by
+@samp{@@ @var{align}}. However GAS already interprets
+the @samp{@@} character as a "line comment" start,
+so @samp{: @var{align}} is used instead.  For example:
+
+@smallexample
+        vld1.8 @{q0@}, [r0, :128]
+@end smallexample
+
+@node ARM Floating Point
+@section Floating Point
+
+@cindex floating point, ARM (@sc{ieee})
+@cindex ARM floating point (@sc{ieee})
+The ARM family uses @sc{ieee} floating-point numbers.
+
 @node ARM Directives
 @section ARM Machine Directives
 
diff -Naur binutils-2.23.51-1.orig/gas/doc/c-cr16.texi binutils-2.23.51-1/gas/doc/c-cr16.texi
--- binutils-2.23.51-1.orig/gas/doc/c-cr16.texi	2013-01-16 16:20:11.000000000 +0100
+++ binutils-2.23.51-1/gas/doc/c-cr16.texi	2013-06-04 08:42:37.376525399 +0200
@@ -1,4 +1,4 @@
-@c Copyright 2007, 2008, 2011 Free Software Foundation, Inc.
+@c Copyright 2007-2013 Free Software Foundation, Inc.
 @c This is part of the GAS manual.
 @c For copying conditions, see the file as.texinfo.
 
@@ -44,26 +44,33 @@
 CR16 target operand qualifiers and its size (in bits):
 
 @table @samp
-@item Immediate Operand
-- s ---- 4 bits
-@item
-- m ---- 16 bits, for movb and movw instructions.
-@item
-- m ---- 20 bits, movd instructions.
-@item
-- l ---- 32 bits
-
-@item Absolute Operand
-- s ---- Illegal specifier for this operand.
-@item
-- m ---- 20 bits, movd instructions.
-
-@item Displacement Operand
-- s ---- 8 bits
-@item
-- m ---- 16 bits
-@item
-- l ---- 24 bits
+@item Immediate Operand: s
+4 bits.
+
+@item Immediate Operand: m
+16 bits, for movb and movw instructions.
+
+@item Immediate Operand: m
+20 bits, movd instructions.
+
+@item Immediate Operand: l
+32 bits.
+
+@item Absolute Operand: s
+Illegal specifier for this operand.
+
+@item Absolute Operand: m
+20 bits, movd instructions.
+
+@item Displacement Operand: s
+8 bits.
+
+@item Displacement Operand: m
+16 bits.
+
+@item Displacement Operand: l
+24 bits.
+
 @end table
 
 For example:
diff -Naur binutils-2.23.51-1.orig/gas/doc/c-tic54x.texi binutils-2.23.51-1/gas/doc/c-tic54x.texi
--- binutils-2.23.51-1.orig/gas/doc/c-tic54x.texi	2013-01-16 16:20:11.000000000 +0100
+++ binutils-2.23.51-1/gas/doc/c-tic54x.texi	2013-06-04 08:42:37.376525399 +0200
@@ -1,4 +1,4 @@
-@c Copyright 2000, 2002, 2003, 2006, 2011 Free Software Foundation, Inc.
+@c Copyright 2000-2013 Free Software Foundation, Inc.
 @c This is part of the GAS manual.
 @c For copying conditions, see the file as.texinfo.
 @c TI TMS320C54X description by Timothy Wall, twall@cygnus.com
@@ -109,7 +109,7 @@
 is replaced with x.  At this point, x has already been encountered
 and the substitution stops.
 
-@smallexample @code
+@smallexample
  .asg   "x",SYM1
  .asg   "SYM1",SYM2
  .asg   "SYM2",x
@@ -126,14 +126,14 @@
 ambiguous by placing colons on either side of the subsym.  The following
 code:
 
-@smallexample @code
+@smallexample
  .eval  "10",x
 LAB:X:  add     #x, a
 @end smallexample
 
 When assembled becomes:
 
-@smallexample @code
+@smallexample
 LAB10  add     #10, a
 @end smallexample
 
@@ -309,7 +309,7 @@
 of a label or address.  For example, if an address @code{_label} resides
 in extended program memory, the value of @code{_label} may be loaded as
 follows:
-@smallexample @code
+@smallexample
  ldx     #_label,16,a    ; loads extended bits of _label
  or      #_label,a       ; loads lower 16 bits of _label
  bacc    a               ; full address is in accumulator A
